Question about 2001 Ford Expedition

1 Answer

HOW MUCH DOES IT COST TO REPLACE BALL JOINTS ON A 2001 FORD EXPEDITION

I WAS TOLD THE BALL JOINTS WERE BAD, I WAS TOLD THAT THE COST 100.00 EACH NOT INCLUDING LABOR.

Posted by on

1 Answer

Lower Ball Joints

Moog K80014 ----$35.79 each

Go to Rock Auto.Com

Bottom ones are common on Expedition

Have to ask a shop about labor

This is just a chat room

Posted on Dec 07, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

motor1258
  • 6674 Answers

SOURCE: Need new lower control arm ball joint repair

If you go to (www.repairpal.com) and enter all your vehicle info, and select the repair in the list, it will give you prices for your particular area, based on your zip code.

Posted on Dec 22, 2009

Testimonial: "Thank You!"

  • 129 Answers

SOURCE: cost to replace lower ball joints 2001 Ford Taurus

At my shop, you'd pay $79. for good (moog) ball joints and $75 to put in each side.

Posted on Jun 05, 2009

  • 202 Answers

SOURCE: How do you change upper and lower ball joints on 2001 Ford Expedition?

i am not going to lie to you on this. if you do not have a very good mechanical back ground you should not attemp this procedure your self because it could result in serious injury. it should be brought to a shop because they do have the right tools to do this. alot of the time ball joints are pressed in under extream amounts of pressure

Posted on Apr 21, 2009

  • 218 Answers

SOURCE: Replacing ball joints on 1999 Ford Expedition

U CAN REPLACE JUST THE BALL JOINT OR THEY COME WITH THE ARMS.DEPENDING ON MECHANICAL ABILITY AND TOOLS IT IS MUCH SIMPLER TO REPLACE THE ARMS

Posted on May 06, 2009

  • 408 Answers

SOURCE: replace lower ball joints

if you have some mechanical knowledge, it is not really difficult.  It is just time consuming.  Pick up a Haynes manual and they will give you a step by step with pics in doing this.

Posted on Mar 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to get a lower ball joint out that wont budge on 2001 ford exp


If it has never been replaced there is a possibility that the factory welded the nut on. Sometimes you have to have the orginal nuts cut off with a torch.

Aug 25, 2012 | 2001 Ford Expedition

1 Answer

Replacing front ball joints


TROUBLE BY? REMOVING IT?? REMOVE AND COUNT EACH TURN AND ASSEMBLE BACK IN THE SAME COUNTED ORDER. TO REMOVE FROM THE SPINDLE HIT IT WITH A HAMMER ON THE SIDE WALL OF WHERE THE BOLTS INSERTS THRU. PRY IT WITH A PRIBAR AND HIT IT ON THE SIDE WALLS THAT WAY BETTER AND EASIER THEN THOSE FORK BALL JOINT REMOVERS.
DONT HIT THE ACTUAL BOLD TREATHS.

Jul 23, 2010 | 2001 Ford Expedition

2 Answers

Check suspension light is on


I believe this light comes on when there is one of several issues. Some symptoms are: Ball Joints worn, tie rod ends, vibration, bad tire(low Pressure also), alignment, pulling to left/right, shocks F/R check some of these and you may locate why light came on. Wayne

Mar 14, 2010 | 1997 Ford Expedition

1 Answer

Cost to replace lower ball joints 2001 Ford Taurus


At my shop, you'd pay $79. for good (moog) ball joints and $75 to put in each side.

Jun 05, 2009 | 2001 Ford Taurus

1 Answer

Replacing ball joints on 1999 Ford Expedition


U CAN REPLACE JUST THE BALL JOINT OR THEY COME WITH THE ARMS.DEPENDING ON MECHANICAL ABILITY AND TOOLS IT IS MUCH SIMPLER TO REPLACE THE ARMS

May 06, 2009 | 1999 Ford Expedition

1 Answer

Can you replace the lower ball joints in the control arms


You can replace them seperately,but they need pressed out and in. Other methods of removing and installing likely will damage control arm.

Apr 23, 2009 | 1998 Ford Expedition

1 Answer

How do you change upper and lower ball joints on 2001 Ford Expedition?


i am not going to lie to you on this. if you do not have a very good mechanical back ground you should not attemp this procedure your self because it could result in serious injury. it should be brought to a shop because they do have the right tools to do this. alot of the time ball joints are pressed in under extream amounts of pressure

Apr 21, 2009 | Ford Expedition Cars & Trucks

1 Answer

Lower ball joint removal


If rust is problem in your area I would suggest (if you have the strength) to remove the knuckle with the rotor still on the hub assembly because F-150's and Expeditions are notorious for the rotors seizing and it's nearly impossible to remove them without damaging them

Apr 08, 2009 | 2001 Ford Expedition

1 Answer

Where are the lubrication fittings on a 2007 Ford Expedition EL?


There are usually no fittings to grease on the ball joints or steering linkages. Recommend a front end inspection every other oil change as I have seen the ball joints go bad at 50000 miles.

Apr 06, 2009 | 2007 Ford Expedition EL XLT

Not finding what you are looking for?
2001 Ford Expedition Logo

343 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...