Question about 1998 Chevrolet S-10 Pickup

1 Answer

Remove a starter form a 98 s-10

How ???

Posted by on

  • jasnmr2006 May 19, 2009

    on a 98 s10 with 2.2 there isnt much clearance when removing the starter, does the exhaust have to be dropped or ?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 34 Answers

1. open hood
2. remove batt. cables
3.remove batt. cable on starter
starter is located lower pass. side of motor
(also might be a couple of other wires connected to the starter remove them as well & remember their locations).
4. remove two bolts that mount the starter to the trans. bell housing. and remove starter
5. install new starter and hook wires up with the batt. last.

Posted on Jan 12, 2009

  • PhilCYA Jan 22, 2011

    Starter is on the DRIVERS side

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Can anybody tell me where the starter is located at,I'm having a hard time


its located on the passenger side lower of engine where the engine bolts to the transmission.

Apr 29, 2015 | 1996 Ford Explorer

1 Answer

How to take off the starter


12_29_2012_6_37_01_pm.jpg
Thats he motor its located between the engine and the firewall, mounted directly on the engine..

1.) remove the negative pole form the battery.

2.) remove the top bolt holing the starter to the engine,

3.) swing the starter down and remove the electrical wires from it, label them so you will know what goes were.

4.) remove the bottom bolts holding h starter in place.

5.) install the new one in reverse

Dec 29, 2012 | 1987 Cadillac Fleetwood

1 Answer

Starter solinoid replacement enstruction


SOLENOID REPLACEMENT
(see Figures 5, 6 and 7)

Prior to removing the solenoid from the starter motor unit, matchmark the solenoid-to-starter motor housing position, as shown in the accompanying illustration.
  1. Remove the starter motor from the vehicle.
  2. Detach the solenoid-to-starter motor wire from the solenoid terminal.

Do not disassemble the solenoid; if the solenoid is defective, replace the entire unit with a new one.
  1. Remove the two attaching screws, then slide the solenoid out of the starter motor housing flange.
9b9a219.jpg

Fig. 5: Before removing the starter motor solenoid, matchmark the solenoid-to-starter motor housing relationship

44d3238.jpg

Fig. 6: Disconnect the field coil lead from the solenoid by loosening the retaining nut ...

e357fdb.jpg

Fig. 7: ... then remove the two attaching screws and separate the solenoid from the motor housing


To install:
  1. Inspect the solenoid plunger joint for wear or other damage. Replace it, if damage is evident.
  2. Apply Suzuki Super Grease A (99000-25010) or equivalent, to the solenoid plunger and to the tip of the lever arm (inside the starter motor-to-solenoid housing hole).
  3. Insert the solenoid into the starter motor housing, ensuring that the matchmarks made during removal are aligned.
  4. Install and tighten the two attaching screws securely.
  5. Attach the starter motor-to-solenoid wire to the solenoid terminal.
  6. While the starter motor is removed form the vehicle, perform the testing procedure to ensure that the new solenoid functions properly.
  7. Install the starter motor.

Hope this help (remember rated and comment this).

Mar 23, 2010 | 1994 Geo Tracker

1 Answer

How to locate starter motor in mazda 323F


The starter motor is located on the back side of the engine (closest to the firewall) underneath the fuel injection/intake manifold. To replace it, first disconnect the battery, then remove the main power cable (heavy wire) and the start wire (light wire). Next remove the two bolts for the intake manifold support bracket and remove bracket. Remove one bolt on starter rear support bracket and 3 bellhousing flange bolts (two accessible from starter side, on accessible from bellhousing side). the starter is now free and can be taken out form teh passenger's side (LHD).

Feb 17, 2010 | 1994 Mazda 323

1 Answer

The starter for my ford 460 stays running after gear is disengaged only have power to solenoid when key is in start position when the truck is shut off one can hear the starter whining down after shutting...


There is a spring in the starter that should cause it to disengage after the electricity is removed. Double check that the electricity is removed form the starter side of the solenoid, cause that is the easiest thing to check first. Then take the starter off and have it checked for free at your local auto store. If it seems OK to them it may be the starter is not the right one for the bell housing. If it sticks in to far, the starter gear may be stuck partly in the flywheel.

Feb 13, 2010 | 1986 Ford F 250

1 Answer

Where it is and how to remove a starter motor on a mazda 323 1988 model


This is for a Mazda 323F The starter motor is located on the back side of the engine (closest to the firewall) underneath the fuel injection/intake manifold. To replace it, first disconnect the battery, then remove the main power cable (heavy wire) and the start wire (light wire). Next remove the two bolts for the intake manifold support bracket and remove bracket. Remove one bolt on starter rear support bracket and 3 bellhousing flange bolts (two accessible from starter side, on accessible from bellhousing side). the starter is now free and can be taken out form teh passenger's side (LHD).

Feb 02, 2010 | 1988 Mazda 323 Hatchback

1 Answer

How to remove and repair a starter motor on a mazda 323 1988 model


The starter motor is located on the back side of the engine (closest to the firewall) underneath the fuel injection/intake manifold. To replace it, first disconnect the battery, then remove the main power cable (heavy wire) and the start wire (light wire). Next remove the two bolts for the intake manifold support bracket and remove bracket. Remove one bolt on starter rear support bracket and 3 bellhousing flange bolts (two accessible from starter side, on accessible from bellhousing side). the starter is now free and can be taken out form teh passenger's side (LHD).

Don't bother repairing it...I would call up a local wrecker and get a swap over...shouldn't cost you more than $30 - $50

Feb 01, 2010 | 1988 Mazda 323 Hatchback

1 Answer

I need to know how to chang the starter and know and located


4.3 litre V6 ? first disconnect the battery before you start, then raise vehicle and place safely on approved weight rated jack stands, you will need a 14 mm or 15 mm socket wrench and an 8 mm socket or wrench to remove wire leads from starter and solenoid, remove starter by removing the two mounting bolts, reinstall in opposite form. starter is on paasenger side of motor sitting in the driver seat...

Sep 24, 2009 | 1999 GMC Jimmy

1 Answer

Need to swap starter motor from top or bottom of


probably form bottom, jack up vehicle and secure , some hardware may have to be removed from top

Sep 12, 2009 | 1995 Dodge Stratus

Not finding what you are looking for?
1998 Chevrolet S-10 Pickup Logo

Related Topics:

630 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...