Question about 2000 Dodge Durango
Battery , alternator, starter, direct short to ground, for this battery to drain that fast it has to be on a main power source
Posted on Dec 07, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2000 Dodge Durango
All you need to do is Remove the POSATIVE cable from the battery for about 25 seconds then reconnect it. This will reset the computer and everything else!
Posted on Jan 30, 2009
There are 3 machine bolts that hold the big white part of the head light to the truck. These bolts are black and I think 7/16 but not completely sure, maybe 12mm or so. You'll need sockets, ratchet and a really long extension. Two regular extensions won't reach the bottom one. You get to all three of them from the front of the truck straight in. Once those are out, the head light assembly pulls forward and can dangle from about 10-12 inches of extra wire. This is attached to the bulb harness. 1/3 of a turn and the wire and bulb come out of the head light. Pop the new bulb back in WITH GLOVES, do not touch those halogens. And put it back together. You can use peanut butter in a deep well or regular socket to hold the screws in to get them started, or the rag thing.
It took me 14,607 hours to find these bolts and about 10 minutes to do the job! Hope it helps out!
Posted on Feb 25, 2009
I Fixed it !!! What happened was that the "O" ring that came with the filter wasn't fully seated in the pump before i put the filter on. It was kind of hard to get it to seat properly I had to get a hammer and a socket w/ an extention and tap it in. It wont go in with finger pressure alone. To find out if this is what the proble is then take off the pan and remove the filter, if the "O" ring is attached to the filter when u remove it then this is the problem.
Posted on Apr 06, 2009
If you look down on the radiator, on the left side, there is a larrge hose coming out of the radiator toward the engine. Where the hose ends there is a housing with 2 bolts. The Thermostat is found under that. Remove the 2 bolts an replace the thermostat. Unles your arms are very long and thin, you will probably need to do this from under the car.
Perfect time to flush/fill all coolant. Check and replace any needed hoses/clamps.
Posted on May 05, 2009
Tips for a great answer:
Aug 19, 2012 | 2000 Dodge Durango
Dec 18, 2010 | 2000 Dodge Durango
Oct 28, 2010 | 2000 Dodge Durango
Jan 12, 2010 | 2000 Dodge Durango
Sep 12, 2009 | 2000 Dodge Durango
Sep 05, 2009 | 2001 Dodge Durango
Mar 19, 2009 | 2000 Dodge Durango
Jun 20, 2008 | 2000 Dodge Durango
211 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: