Question about 2007 Mercedes-Benz ML350

1 Answer

REPLACEING HEADLIGHT IN ML350 - 2007 Mercedes-Benz ML350

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,606 Answers

Not sure if you need to replace the entire lens assembly or just a hid bulb. The Assembly is easy to remove with only 3 10mm bolts. The bulbs are all accessible from the back but the drivers side is a bit snug if you have larger hands. Most guys pull the assembly to give easy access to everything. Any of this is definitely a DIY that should take under 20 minutes both sides. If you need to replace bulbs buy a pair and replace both sides not just one. When you update this with what needs to be done then we can get your proper instructions

Posted on May 17, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change low beam headlight bulb on 2010 ml350


With a lot of cursing, usually. Remove the rear cover from the headlamp assembly. Grab the socket attached to the bulb and turn counter clockwise about 1/8 of a turn. The bulb will then come out with the socket and can be replaced. Install in reverse order (remember the orientation of the bulb and socket and they will only go in one way).

Oct 20, 2014 | 2010 Mercedes-Benz ML 350

1 Answer

How do you remove a low beam headlamp and replace on a 2010 mercedes ml350?


quite easy you remove the bumper to gain access so you can remove the headlight .

Aug 01, 2011 | Mercedes-Benz ML350 Cars & Trucks

1 Answer

My low beam light bulb of my Mercedes Benz ML350 is not working . How can i replace the bulb?


well this is not easy unless you make a accessby removing anything in the way,or just take the headlight out ,How did you manage to open the bonnet as these vehicles from around this year started using a sealed bonnet that only the dealers can open with a special electronic key that uses rolling encrypted software.

Aug 30, 2010 | 2007 Mercedes-Benz ML350

1 Answer

Replaceing headlight on 2006 forenza?


I had a heck of a time trying to figure this out myself. Finally found a solution thanks to a helpful youtube video. Watch this and you'll be able to change the headlight in your Suzuki Forenza

Jul 14, 2010 | 2006 Suzuki Forenza

2 Answers

Head lights stoped working on my 1989 ford festiva


Start by checking the fuse(s), then if all is good there,move on to checking or replaceing the headlight relay, if all is good check the head light on/off switch on the dash,and last if all is good there, check or replace the headlight bulbs.
Good Luck !

Apr 09, 2010 | 1991 Ford Festiva

1 Answer

Right headlight don't work


maybe contact wire dirty or broken at light,or bad ground?

Dec 07, 2009 | 1993 Toyota Camry V6

1 Answer

Replaceing front low beam headlight


remove top three fasteners for headlamp assembly... pull assembly straight forward firmly disconnect harness

Nov 25, 2009 | 2006 Pontiac G6

1 Answer

BOTH LOW BEAMS QUIT WORKING BUT HIGH BEAMS STILL WORK.


try replaceing the headlight relay switch or the headlight multi function switch.

Jul 04, 2009 | 1991 Buick Park Avenue

1 Answer

How to change headlight bulb, '06 Honda Accord drivers side?


remove a few of the clips on the inner fender liner, depending on which bulb u are replaceing(left or right?) turn the wheels in either direction and u will be able to slide ur hand or arm between the liner and fender to gain access to the bulbs and connectors..do not remove the battery .

Mar 28, 2009 | 2008 Honda Element

Not finding what you are looking for?
2007 Mercedes-Benz ML350 Logo

221 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...