Question about 2006 Volvo V70

1 Answer

Airbag warning light

How do i clear airbag warning light only came on afterb flat battery

Posted by on

  • yadayada
    yadayada May 11, 2010

    From a Volvo owners forum:

    YOU cannot. (That's a period)
    ...unless you want to spend several thousand dollars for the correct scanner and a subscription to VIDA, there is nothing you can beg borrow or buy
    Besides, if you have an SRS light it will come right back until the problem is FIXED.
    Suggest you take it to a dealer, pay the one time labor fee to get everything where you want it

  • yadayada
    yadayada May 11, 2010

    You must reset the airbag dianostis module, this is best left to the dealer.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 79 Answers

You will have to take it to a dealer I'm afraid.

Posted on Jan 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i reset Air bag code for 2006 mercedes E350


Mercedes SRS Airbag Light MOT FAIL How To Fix - YouTube

? 3:48
https://www.youtube.com/watch?v=JVEuOzYaH1M
Oct 1, 2013 - Uploaded by OBD Diagnostics
Mercedes SRS Airbag Light MOT FAIL How To Fix ... SRS LightReset (cheap, easy) - Duration: 3:07. ... Autel AL619 Clear SRSAirbag Light Mercedes W211 E Class ... OBD2 Fault CodeDiagnostic Scanner/Readers @ Diagnostic World ... 2000Mercedes-Benz CLK-Class Start Up -- SRS Airbag Light On ...

Mercedes E W211 SRS Airbag Warning Light - How to turn it ...

? 1:00
https://www.youtube.com/watch?v=KZWAPGmf-Pk
Feb 12, 2013 - Uploaded by DominatorParts
Mercedes E W211 SRS Airbag Warning Light - How to turn it off ... AUX USB Ipod iPhone adapter E-Class 2003-2008 Mercedes Benz Dension ...

How To Reset The ESP Light On A Mercedes Benz

www.mademan.com/mm/how-reset-esp-light-mercedes-benz.html
Jul 11, 2010 - They will check to see if your Mercedes Benz shoots out any codes. They will check .... How To Reset Airbag Light On A Dodge. Need to know ...

Best tool to reset SRS light - MBWorld.org Forums




Jan 14, 2016 | Cars & Trucks

1 Answer

B1801 Ford Escape 2002. The air bag light comes on the instrument panel in my vehicle and will stay on for a while then go away. I had someone test it for me and told me it was code B1801. It was at a...


Did you disconnect the battery recently...did you operate the horn.both questions related to what may originally cause the airbag warning light to stay on.if it was the battery being changed reconnected then you have to reset the airbag light.this is quite simple on Fords.
with the engine off ....ignition key into the lock open the drivers door and keep it open ....locate the button at the bottom of door for courtesy light....hold your finger on it...turn the ignition on so that only the lights on dash come on...do not start car....now press the door button 6 times within ten seconds and on the last count of six hold it in whilst turning off the ignition.then close the drivers door and start.the airbag light usually flashes for several seconds then it should clear.on some model fords the button press count is 5 or 7 so you may need to repeat ....on mine I discovered I had to open the passenger door after the procedure before turning ignition back on.a word about the horn.on older model fords the springs that sit in the horn housing also affect the sensor of the airbag in some models .the springs gets rusty or bunged up and operating it will cause the airbag sensor fault.never attempt to remove the cover of the horn assembly as you may fire off the airbag.just remember to reset the warning light... And get a mechanic to look at the horn if it continues to play up.Please remember if the airbag warning light is flashing it may mean the airbag will be disabled and will not deploy in the event of an accident, this also means the seatbelts may not lock on impact either.please vote if helpful thanks.

Feb 27, 2015 | Ford Cars & Trucks

1 Answer

Error b1034 airbag warning light


This light came on in my car when the alternator went bad. If the airbag system is not getting enough voltage it will show a warning indicator light. Check your battery and alternator to make sure they are putting out enough juice.

Jun 30, 2012 | 2003 Renault Clio

1 Answer

Chevrolet silverado 2004 airbag sensors reset


The airbag in your vehicle is an important safety device, and the airbag module ensures the proper functioning of your vehicle's air bag. If this module is not functioning properly, your airbag may not deploy during a crash. When there is a malfunction, your airbag module warning light will illuminate on your vehicle's dash. You will need to have the airbag assembly checked out by a qualified mechanic, but once that is done, you can reset the warning light and airbag module unit. If you've never done this type of job before, it should only take you 5 minutes.
    • 1 Open the hood and loosen the retaining nut on the negative cable wire cable clamp using a socket wrench.
    • 2 Slide the cable clamp off the negative battery terminal.
    • 3 Wait 3 to 5 seconds and reconnect the battery terminal. Tighten the retaining nut using a socket wrench. Once the power is restored, the airbag module should be reset.
    • 4 Verify that the module has been reset by turning the ignition key to the "II" position and checking to make sure that the airbag light does not illuminate.

Oct 08, 2011 | 2001 Chevrolet Silverado

2 Answers

My airbag light blinks 7 times when i startmy car


{: ) If the airbag light goes off after that 7 blinks (some are 6 or 8), that will be normal. The airbag module will blink the airbag warning light on the cluster while performing self-test during initial start-ups. After the self-test and the airbag module did not detect any fault within the airbag system, it will turn the warning light off. If the airbag warning light continuously blink or stayed lit after the expected elapse time, then there is really a concern and you need to double check the airbag system with a scan tool.

Aug 31, 2011 | Chevrolet Blazer Cars & Trucks

1 Answer

ABS light comes on... but no noticble degradation in operation etc.


Most likely a wheel speed sensor, hopefully... The only thing that will change when the ABS light is on is that the ABS will not function as long as the indicator is on. I hope this info helps.

When the airbag system is in functioning condition, the airbag warning light will remain on for about 7 seconds and go out when the ignition switch is set to ON .

If there is any malfunction, the airbag warning light will either stay on or off continuously. In such cases, perform on-board diagnostic in accordance with the specified procedure to determine trouble codes.


  1. Turn ignition switch ON (with engine OFF ).
85091723



  1. Connect DIAG. terminal to No.2 terminal of diagnosis connector located inside lower cover.
  2. Check in accordance with the trouble code indicated by the AIRBAG warning light, and record the trouble codes.
  3. Turn the ignition switch "OFF " and remove the DIAG. terminal from No.2 terminal of diagnosis connector.
85091724


HOW TO READ TROUBLE CODES
The ABS lamp flashes a code corresponding to the faulty parts.

The long segment (1.2 secs on) indicates a "ten", and the short segment (0.3 secs on) indicates a "one".





NOTE: This is the only information provided by the manufacturer for clearing diagnostic trouble codes.

97511505


CLEAR MEMORY
After eliminating problem as per trouble code, clear memory as follows:

Make sure ignition switch is ON (and engine off). Connect one DIAG. terminal (1) on diagnosis connector (2) terminal No.1.

where warning light is flashing, connect the other DIAG. terminal (3) on terminal No. 2 for at least three seconds . After memory is cleared, normal warning light flashing rate resumes. (Warning light flashes every 0.6 seconds (ON-OFF operation.) Memory cannot be cleared if any problem exists.

After clear memory and then DIAG. terminals (1) and (3), extract from diagnosis connector (2)

Jul 27, 2011 | 1999 Subaru Legacy

1 Answer

My srs airbag warning light doesn't go out on my 05 honda pilot. How do I shut it off


There are 4 most important components involved in the airbag deploy system.
Airbag itself.
Airbag Clock Spring.
Airbag Control Unit (ACU) or Airbag Module.
Airbag Impact Sensors.
If it is any problem in the components, then Airbag Light stays ON.
Sometimes there is a false code, and AUC can be cleared and reset. This can be done by professionals and cost $60 to $70. Might be a loose connector or a defective component, in this case they might charge you more.
The light indicates a problem with your air bags. Do not attempt to do any repairs to the system by yourself. Take it to the Honda dealer or a qualified service center.

Nov 06, 2010 | 2005 Honda Pilot

1 Answer

Audi A4 1999 Battery Died, now no stereo and airbag light lit


disconnecting the power will cause the airbag warning light came on as a warning that you may have a faulty unit,can be reset if you have the machine to do it(your local dealer will have one)The radio will require you to put in the code to restart it....

Apr 28, 2010 | 1999 Audi A4

1 Answer

Airbag Warning Light. Clears with reset, but comes on again


Most definitely electrical problem. Though GM connectors are quite reliable - they sometimes get misconnected or you have a poor connection. get it cehcked.

Jul 08, 2009 | 2008 Chevrolet Impala

1 Answer

Airbag light


This is either a problem with one or both of your airbags or the airbag connector located at the back of the glovebox has been disconnected for some reason. (ie. to prevent airbag opening when installing baby seat) (1999 miata does not have a baby seat airbag disabling sensor).

You should get your car inspected at your local mazda service to check if this is a wiring (plug disconnected) issue or one of your airbags is malfunctioning and needs to be replaced.

Flashing airbag light could indicate that either one of the airbags or both have a problem. Disconnecting the passenger's airbag has the same effect.

Warning! Do NOT attempt to do any kind of airbag/airbag wiring related repair yourself. Airbag problems should be addressed ONLY by certified technicians at your local Mazda service. (Airbag fixing requires for example that the car battery is disconnected, you MUST NOT attempt anything with the car battery connected).


Hope this helps.

Jun 10, 2008 | 1999 Mazda MX-5 Miata

Not finding what you are looking for?
2006 Volvo V70 Logo

Related Topics:

383 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...