Question about 2006 Toyota Prius
Engine light on and getting code P1151 on a 2000 toyota sienna
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: code 1346 on 2002 toyota sienna
P1346 is the code for:
VVT Sensor /Camshaft Position Sensor Circuit Range/ Performance Problem (Bank 1)
If the code came on just after the timing belt replacement more than likely the sensor was damged in some way during the work. The sensor is located in the same area the mechanic was working in while changeing the timing belt. You should have this checked right away. A faulty cam sensor can also lead to the vehicle not starting.
Posted on Sep 04, 2009
Testimonial: "thanks sounds good"
P1135 (for Toyota) means A/F Sensor Heater Circuit Malfunction Bank 1 Sensor 1 (Set when the heater operates, heater current exceeds 8A or heater current of 0.25A or less).
The A/F sensor contains a ECU-controlled heater. At start-up, the heater helps warm the A/F sensors to quickly operating temperature. With minimal exhaust gas flow, the heater keeps the A/F sensor from cooling down.
Posted on Sep 17, 2009
Dealer Item ` $200
Junk Yard ~ $100
https://toyotapartscenter.net/toyotasiennaparts.html?gclid=CPX5u8HUlZ4CFSn6agod6Ae1oQ sells them for $167.17 + shipping and tax
I recommend a pull, light tap and reconnect, recheck B4 buying. Also, shop manual has proper test procedure, Pages BE16-17
Posted on Nov 18, 2009
Hello. Your P-0420-code is most likely due to a bad Air-Fuel sensor; Bank one, Sensor one. This sensor is on the exhaust manifold, closest to the firewall.
We would recommend replacing this sensor.
Note: Please use a genuine Toyota sensor; the aftermarket sensors do not deliver the correct voltage to the computer. If you purchase an aftermarket sensor, your problem will not be corrected; we see this quite often in our service department.
We hope that this helps you out.-
Posted on Dec 30, 2009
Testimonial: "thank you,you've been very helpful."
The problem is in the sunvisor light. You will have to take the light assembly off and you will find wires have become disconnected.
Posted on Jan 29, 2010
Tips for a great answer:
Nov 25, 2016 | 2000 Toyota Sienna
May 01, 2014 | 2000 Toyota Sienna
Dec 10, 2012 | 2000 Toyota Sienna
Sep 22, 2012 | 2000 Toyota Sienna
Apr 03, 2012 | 2000 Toyota Sienna
Aug 25, 2011 | Toyota Sienna Cars & Trucks
Aug 05, 2011 | 2000 Toyota Sienna
Jul 13, 2010 | 2001 Toyota Sienna
Oct 04, 2009 | 2000 Ford Ranger SuperCab
64 people viewed this question
Usually answered in minutes!