Question about 2002 Honda Passport
When the engine is off and all doors are shut, the lights on the rear-view mirror stay on.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It should be your brake light switch. There is a little plate welded to the arm of the pedal that has a hole with a rubber stopper. The rubber stopper is most likely missing, or damaged. You should be able to take a flashlight and see the plate and the switch. If the hole is plugged up, you will need the brake light switch, if not, replace the plug.
Posted on Jun 02, 2009
While replacing REAR CALIPERS Park Brake Should NOT BE APPLIED Until Completely DONE with PROCEDURE,Nor Should it be Released During Procedure. As isogeorge Said Your Problem MAY Be in the Adjustment of the PARK BRAKE CABLE, Requiring removal of Rubber BOOT @ HANDBRAKE and Tightening or Loosening of Cable whichever you deem Appropriate. In My Thoughts it is too tight thus Engaging PARK BRAKE SWITCH turning ON LIGHT. PLEASE Feel FREE to Refer Back to Me For ANY Assistance with this Problem, Hope this Gets you on the right Track and Solves your Problem.
Posted on Jun 08, 2009
At most auto parts stores, they carry what is called "Rearview mirror adhesive" - It costs about $4 or $5, and comes is a little "blister" package. It is a special two-part adhesive (utilizing a pre-cleaner and a "gluing" agent) that is REQUIRED for installing these mirrors on glass - Super glue will not work for this,... All you will do with superglue is make a mess... - The adhesive isn't terribly hard to use, but it does require a bit of patience, and I'd recommend following the instructions to a "T" for the best results (Temperature, time, etc..). Hope that helps some...
Posted on Sep 12, 2009
There are three ways usually...
You'll need to remove a screw securing the base onto the mount (usually on metal bases)
You'll need to lift up a clip on the bottom of the base and then slide the base off the mount (usually on plastic rectangular bases
You'll need to twist the base about 45 - 90 degrees so that it slips off of the mount (usually on bases that are circular)
Posted on Nov 12, 2009
Testimonial: "Excellent response and timely! I am attempting to find the right "tool" to pry up the internal clip...a flatblade screwdriver doesn't seem to do it."
I am assuming you are talking about the interior rear view mirror and not the side rear view mirror. Most auto parts stores sell an adhesive glue to fix the interior rear view mirror. Most of these mirrors have two parts to them. One part is the bracket that glues to the windshield and the other part is the rear view mirror assembly. Before gluing the bracket to the glass check and see how the mirror assembly attaches to the bracket. There will often be a screw that fixed the two together.
Posted on Feb 21, 2010
Tips for a great answer:
on May 10, 2012 | 2004 Honda CR-V
Jan 16, 2013 | 2000 Pontiac Grand Prix
Here's how do replace it: go here! just type this in search box,on pc. 2009 honda pilot outside mirror replacement. then click on first link, good-day !
Sep 20, 2011 | 2009 Honda Pilot
Feb 13, 2011 | 2002 Buick Regal
Feb 01, 2011 | 2002 Chrysler Sebring
May 11, 2010 | 2002 Buick Regal
Apr 11, 2009 | 1997 Chevrolet Cavalier
Feb 19, 2009 | 2002 Volvo S60
60 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: