Question about 2001 Chevrolet Impala

Open Question

Replace brake lines 2001 malibu - 2001 Chevrolet Impala

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace brake lines on 2000 malibue


follow damaged line each direction and unscrew from each end any auto store can assist you with replacement line in length and connections ---reconnect new line --now you have to bleed the brakes --open master cylinder and fill with brake fluid --start at rear passenger side and start bleeding to get air out --than go to rear drivers side and do same next is pass-front and finish with front drivers side than your done

Apr 28, 2014 | 2000 Chevrolet Malibu

1 Answer

Chevy Malibu 2001 with 89,000 miles idling too high during park


Back to the mechanic - sounds like either an IAC motor or TPS sensor is the problem, but also could be the throttle cable (sticking leaving the throttle not fully closed).

Jul 04, 2017 | 2001 Chevrolet Malibu

2 Answers

Brake lights are not working but my back window brake light works and so do my tail lights and turn signals. 01 chevy malibu


if rear window stop light works has blown globes in other 2 tail and stop are different circuts fit 2 new globes only go in 1 way

Sep 16, 2013 | 2001 Chevrolet Malibu

1 Answer

How do i turn the ABS light off of a 2001 chey malibu?


Yes, you can bleed them. But unless you opened the lines when you changed pads, you shouldn't have gotten air in the lines. Are you sure both brake reservoirs are full? If they are, then try bleeding. Start at a rear tire and move to front, with the driver's side being last one bled. Check carefully for any signs of brake lines leaking.

Nov 12, 2011 | 2001 Chevrolet Malibu

2 Answers

I HAVE REPLACED ALMOST EVERYTHING ON THE BRAKES OF MY 2001 MALIBU. I HAVE BLED ALL AIR OUT OF LINES. WHEN THE CAR IS STARTED AND THE BRAKES ARE PUSHED, THEY GO DOWN TO THE FLOOR.THEY START TO COME UP ON...


the brakes need to be bleed of air using a special tool that holds open the hydraulic control valve's of the ABS Hydraulic control unit, better brake shops have universal ones the dealer of course has the correct chevy tool, without the tool u can't bleed the brakes completely

Aug 24, 2010 | 2001 Chevrolet Malibu

1 Answer

HOW TO PUT A OIL PAN GASKET ON A 2001 CHEVY MALIBU?


pull the vehicle on ramps or put on jack stands. set the emergency brake pull off flywheel cover if there is one remove all the bolts from pan and drop it down might catch on oil pump. pull off old gasket and replace with new one

Sep 01, 2009 | 2001 Chevrolet Malibu

1 Answer

2006 malibu maxx brakes problem...


Yes air gets into the hole system. You need to bleed all 4 wheels.

Jul 02, 2009 | 2006 Chevrolet Malibu Maxx

2 Answers

I can't find the ABS Brake Module and Pump on my 1998 Malibu


The ABS module is located on the driver side of the car where the firewall and driver side fender meet, It is a silver box with brake lines running to it. The pump should be located within that box.

Nov 20, 2008 | 1998 Chevrolet Malibu

Not finding what you are looking for?
2001 Chevrolet Impala Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...