Question about 1999 Chevrolet Silverado 1500

2 Answers

Heating Fan dosent work on the first two settings

Of the 5 settings, my fan inside the cab works the first two settings (1, 2) do not work, but 3, 4, and 5 work normally. Any clue as to how I can fix this?

Posted by on

  • Rick Byrd
    Rick Byrd May 11, 2010

    of the 100 people surveyed , the most popular answer is : replace the blower resister . judges ?

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 60,867 Answers

You will need to replace the blower motor speed control resistor, very cheap part, it is located near the blower motor in the air duct work, when u get the new one u will see the old one right away.

Posted on Jan 12, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 103 Answers

You have a bad Blower Motor Resistor, you will most likely have to get this from the dealer, and it is located right around the blower mounted to the blower housing. Good luck and don't forget to vote. Thanks

Posted on Jan 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Heating fan switch not working


cab heater? there are 3 fans, engine,cab heat and A/C. so....
a stuck CAB switch is a bad switch. easy huh?
if the switch only works on high but does move, that is a bad heater fan Resistor block. (usually bolted to fan hosing as it is air cooled this part)

Feb 01, 2014 | 1991 Toyota Pickup

1 Answer

Change heater core water pump one pipe get hot


try some comma's?
my wild guess, is you are trying to fix a dead cab heater, right?
and if so, can be caused by 5 things wrong. total.
1 engine coolant not hot (180F or more)
2; fan dead.(cab heater fan)
3:or core , coolant path blocked. (seems you)
4; core exterior core blocked with leaves or pin needles. (sucked in)
5: optional core valve , stuck closed. (cable bad, etc)\



one pipe hot , means ,? core pipe 1 is hot, and other is dead cold?
this flow blockage , bingo !

if pipe 1 is 180F and other is 120f this is normal the heater is heating air in the cab and is dropping due to this heat exchange. (normal)
so why not do the 2 year full flush service now. (skipped i bet)
core hoses:
remove the 2 hoses on engine side, never core side (easy damage)
then back flush both hoses. with a garden hose.
if there is a valve there, test it and make sure it's opening... and free flowing.
and that both engine water ports are open too, from heater hose
to engine. (yes, they pack up too)

Dec 07, 2013 | 1998 Toyota Camry

1 Answer

2004 grand marquis fan quit working..replaced fan but still wont work


is this the blower motor fan for you heating and A/C or the cooling fan cooling fans have a relay blower fans are fused but controlled from switches inside as well as fuses

Aug 27, 2012 | 2004 Mercury Grand Marquis

1 Answer

The heating fan won't turn on, no power to fan. intermittent problems with the selector buttons not lighting up and working to select mode. all fuses and relays check out fine. do i need to replace the...


no, you may have two problems, the fan il bet is a blower motor resistor,replace that and fan will work again, the selector problem may just be bulbs not lighting, if you can can air to blow in areas you select then dont worry about the light not lighting, if it dosent select then replace the head, hope this is helpful.

Dec 07, 2009 | 1994 Buick LeSabre

1 Answer

Malfunctioning heating system, 2004 Chevy Silv


Blower fan only works in highest (#5) setting. Problem started a wek ago.

Sep 21, 2009 | 2004 Chevrolet Silverado 1500 Crew Cab

1 Answer

Fan kicking in too often 1998 f150 4x4 4.6 tow


If the engine is not over heating then it is doing its job. The constant cycling is based on the temp of the air traveling through the radiator and the a/c condenser not the outside temp so much. The start up high rev is just how these clutches work in ford fans. It sounds like it is operating correctly.

Jun 24, 2009 | 1998 Ford F150 Regular Cab

1 Answer

Interior Fan only works on No.3 setting


Are you sure it's not working and that it's not just quiet on settings 1 and 2?

Jan 31, 2009 | Hyundai Motor 2003 Elantra

2 Answers

Blower dosent blow on high


fan blower speed switch under hood usually in fire wall or in heater box under dash area if you do not change it you will keep losing all your speeds until nothing left! it is not!!!!the one in your dash that you hand operate! hope this helps.John

Jan 24, 2009 | 2006 GMC Envoy

Not finding what you are looking for?
1999 Chevrolet Silverado 1500 Logo

200 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...