Question about 1999 Kia Sportage

Open Question

What are the alternator bolt sizes on a 1999 kia sportage?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

johnny5846
  • 379 Answers

SOURCE: what are the torque specs for the head bolts for a 1999 sportage

hi bob
head torque on the 2.0 DOHC is 64 ft lbs , done in two -three steps , also there is a sequence for proper order . here is a very good description with graphics .

1999 kia sportage 2.0 DOHC head torque

Thanks for using FIX YA !

J5

Posted on Jan 24, 2009

  • 2 Answers

SOURCE: I have a 1999 Kia Sportage. Was driving and water

Heater core is bad. You probably have had to add coolant every so often. Be careful, as I have seen the PCM located below and to the left of the core get wet and then you find yourself with more problems. For now, just bypass the heater core under the hood.

Posted on Jun 24, 2009

  • 25 Answers

SOURCE: A 1999 Kia Sportage. Heater core leaking.

tie both hoses together

Posted on Jun 25, 2009

  • 1 Answer

SOURCE: i nead torque wrench setting for head bolts and cam bolts

Can anyone help us we need to know what is the setting for the cams in our Kia carnival Classic 2001

Posted on Jul 01, 2009

c17hydro
  • 2984 Answers

SOURCE: 1999 kia sportage timing marks

dfd3ea1.gif Crankshaft match marks


Align marks on timing belt pulley and pump body.

Camshaft pulley alignment marks
9f1c7ef.gif

  1. Align marks on camshaft pulleys with alignment marks on seal plate.
  2. Install timing belt. NOTE: No looseness should exist on the tension side and at the camshaft pulleys.
  3. Loosen tensioner lock bolt.
  4. Turn crankshaft 2 revolutions in direction of rotation and check that timing marks are still in alignment.
  5. Tighten timing belt tension lock bolt to 27-38 ft lb (32-52 Nm).
  6. Apply a force of 22 lbs to timing belt between camshaft sprockets.
  7. Belt deflection should measure 0.30-0.33 in (7.5-8.5 mm)
  8. NOTE: Replace tensioner spring if timing belt deflection is excessive.
Timing Belt Installation


eb770f2.gif
  1. Install lower timing belt cover.
  2. Install upper timing belt cover.
  3. Install power steering drive belt and adjust belt tension.
  4. Install fan pulley.
  5. Install generator drive belt and adjust belt tension.
  6. Install A/C drive belt and adjust belt tension.
  7. Install splash guard.
  8. Install fan and fan shroud.
  9. Install 4 fan bolts. Tighten to 24 ft lb (33 Nm).
  10. Install fan shroud mounting bolts.
  11. Install fresh air duct.
  12. Connect hose to resonance chamber.
  13. Connect battery negative cable.

Posted on Jul 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do replace the alternator belt on a kia 2002 sportage


There is a log bolt that needs to be loosened,but the bolt on the back ,top of the alternator has to be loosened first,then turn the long adjusting bolt counter clock wise,to loosen the alternator to get the belt off,after loosening the long bolt you can pull on the belt itself,and this will pull the alternator towards the engine,then you can remove the bolt.

Apr 17, 2010 | 2002 Kia Sportage

1 Answer

What other make of 4 cylinder engine can replace a 1999 Kia Sportage engine ? a Suzuki or another Kia 4 cylinder from a optima ?


Got a cutting torch and welder ... you can put in anything you want, so long as the bolt holes line up. Good luck getting it through inspection if you are in the USA.

Apr 14, 2010 | 1999 Kia Sportage

1 Answer

What is connecting rod bolt torque specification 1999 KIA Sportage


check your service manual for torque specs or look up the torque specs online for the number or letter it has on top of the bolt

Jan 16, 2010 | 1999 Kia Sportage

1 Answer

Hard to put my manual transmition kia sportage


YOU COULD HAVE FAULTY CLUTCH DISC AND PRESSURE PLATE.ALSO YOUR SHIFT LEVER LINKAGE LOOSE OR MISSING BOLTS AND COULD BE WORN OR DAMAGE.

Nov 12, 2009 | 1999 Kia Sportage

1 Answer

99 Kia Sportage, meter fuse keeps blowing,


you have a dead short some were or you have bad alternator check alternator first

Aug 30, 2009 | 1999 Kia Sportage

1 Answer

HOW HARD IS IT TO REMOVE AN ALTERNATOR


Yes, very easy...here is the steps to do it:

To Remove:
  1. Disconnect battery negative cable.
  2. Remove air cleaner inlet pipe.
  3. Disconnect alternator electrical connections.
  4. Loosen (but do not remove) pivot bolt and tensioner mounting bolt.
  5. Remove drive belt form alternator pulley.
  6. Remove tensioner mounting bolt and belt tensioner.
  7. Remove pivot bolt, loosen adjusting bracket bolt and rotate bracket up.
  8. Remove alternator.

To Install:

  1. Place alternator on engine.
  2. Install (but do not tighten) pivot bolt.
  3. Rotate bracket down on top of alternator.
  4. Install belt tensioner and install bolt loosely.
  5. Install drive belt on alternator pulley.
  6. Tighten tensioner bolt to 14-19 ft lb (19-26 Nm).
  7. Tighten pivot bolt and bracket bolt to 28-38 ft lb (38-51 Nm).
  8. Connect alternator electrical connections.
  9. Install air cleaner inlet pipe.
  10. Connect battery negative cable.

120f25e.gif

Jul 13, 2009 | 1999 Kia Sportage

1 Answer

'02 Kia Sportage Head Bolt Socket.


its a size 14 metric socket. but you have to use a 12 point one not the regular 6 point one

Mar 05, 2009 | 1999 Kia Sportage

1 Answer

Kia sportage repair manual


http://www.kiatechinfo.com/index.asp



try that, it has everything from wire diagrams to bolts sizes you just have to scan around good luck

Feb 24, 2009 | 1998 Kia Sportage

2 Answers

I nead torque wrench setting for head bolts and cam bolts


Head bolts- 62 lb-ft cam pulley lock bolt- 42 lb-ft cam cap bolt- 16 lb-ft

Feb 02, 2009 | 1999 Kia Sportage

1 Answer

What are the torque specs for the head bolts for a 1999 sportage


hi bob
head torque on the 2.0 DOHC is 64 ft lbs , done in two -three steps , also there is a sequence for proper order . here is a very good description with graphics .

1999 kia sportage 2.0 DOHC head torque

Thanks for using FIX YA !

J5

Jan 24, 2009 | 1999 Kia Sportage

Not finding what you are looking for?
1999 Kia Sportage Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...