Question about 2007 Mitsubishi Outlander LS

Open Question

Where is the blower motor resistor on a 2007 Mitsubishi Outlander?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 80 Answers

SOURCE: Need to know how to get to the blower motor resistor for '02 mits

Number 2 is your blower motor resister.
Number 3 is a blend door (damper motor)
Number 4 Hose
Number 5 Blower Motor
Number 6 Blower Case
Open glove box you will see it on you left hand side
It will be a very tight fit, Sure take about 30 to 40 minture.
Let me know if this help you..


eb29c61.jpg

Posted on Oct 03, 2009

Ad
  • 333 Answers

SOURCE: mitsubishi outlander cooling fans not operating

There is a Recall to replace your cooling fan module because of this concern.

Open your hood and look at the black box bolted to your radiator fan by the battery. If it does not have a green dot on it, you have not had the replacement fan module installed.

Contact your local dealer with your VIN handy to verify the recall has not been done and to schedule an appointment.

If the recall has been done, verify if you have power coming out of the module to the fans, as the fans do burn out eventually.... but rarely both at once.

Posted on Sep 10, 2009

  • 333 Answers

SOURCE: RPM to low (700rpm) mitsubishi outlander 2.4L 2005

Your throttle body likely needs cleaning.

Take the intake hose off and using throttle body cleaner or brake cleaner, spray a rag and use our fingers to clean the gunk off the throttle plate and the contacting area of the inside of the throttle body.

Posted on Sep 10, 2009

  • 226 Answers

SOURCE: What are the best tires suitable 07 Outlander XLS

www.tirerack.com They have a great setup on deciding which tires you want with a ton of information.

Posted on Nov 18, 2009

  • 1 Answer

SOURCE: How do I change the oil and fuel filters on My

Is this a diesel? I just changed my oil and oil filter. You have to remove the plastic engine top cover first and you will see the oil filter in the front right. Black with hex nut on top (my 1 1/4 AF socket fitted). You have to disconnect the bracket holding some wiring. Pull the wiring forward to access the nut on top of the filter. Undo and remove/replace filter.
Under the car you will find a small hatch in the underside plastic cover held in place by three 10 mm bolts. Remove this to access the 19 mm drain plug. Drain old oil and refill with 4 ltrs 5/30 fully synthetic. Top up if necessary after running engine but DO NOT overfill.
The fuel filter is on the bulkhead at the back of the engine on the right side. I wont be changing that for a while!

Posted on Apr 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Heater/AC Fan quit on 2008 Outlander. blower Does not come on


I would replace the blower motor with a used part found online if you want to save some money and time.

Nov 07, 2013 | 2009 Mitsubishi Outlander

1 Answer

Trouble shoot blower motor switch


Often times the problem is the blower resistor not the switch.
You would use a meter or a test light to check for power at the resistor and also the switch. The resistor controls power to the blower motor to adjust speed.

Sep 16, 2012 | 2000 Mitsubishi Montero Sport

1 Answer

2003 mitsubishi outlander heater fan doesn't work, how might I fix it?


either bad blower motor resistor (least expensive fix to atempt) , or blower motor bad or electrical circuits to motor

Dec 17, 2011 | 2003 Mitsubishi Outlander

1 Answer

Fan for ac/heat does not work on lower settings


The blower motor resistor is bad.Replacing that should fix the issue.In addition it is possible that the blower motor may have caused the resistor to go bad. If that is the case then the blower motor should be replaced as well.

Jun 01, 2010 | 2003 Mitsubishi Outlander

1 Answer

Mitsubishi outlander 2009 what"s is the best motor oil do I have to use 10/30 or 10\40


check the owners manual or read the oil fill cap. if you can't find the oil specs i would use 5w30

Apr 05, 2010 | 2007 Mitsubishi Outlander XLS

2 Answers

What are the best tires suitable 07 Outlander XLS


www.tirerack.com They have a great setup on deciding which tires you want with a ton of information.

Nov 18, 2009 | 2007 Mitsubishi Outlander XLS

1 Answer

04 mitsubishi outlander ac is not working


What to you mean not working?

a) Air blows but is not cool.
If this is the case, suspect refrigerant leak. Do not operate AC untill it is checked fully. Operating AC with freon leak may lead to compressor failure and expensive replacement.

b) No air blows at all.
If this is the case, suspect blown fuse or burned blower motor. Sometimes is just a fuse or may have a malfunctioning resistor (blower motor works only at full speed).

Jul 13, 2009 | 2004 Mitsubishi Outlander

Not finding what you are looking for?
2007 Mitsubishi Outlander LS Logo

Related Topics:

1,040 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...