Question about 2004 Cadillac Deville
Power seat quit working, not moving back or able to change positions back for 1st driver
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Check for a burned fusible link under the hood. If you have power at the fuel pump relay, you could have a bad ignition switch or bad oil pressure switch...accordianman
Posted on Dec 15, 2008
Hi,from inside the trunk, in some models just need to remove the carpeted cover and you will see the sockets ,in others you need to remove the complete tail lamp but is not hard ,just a few screws and it wil come off......C1
Posted on Jan 04, 2009
I have a 2004 CTS. I know there are two fuse boxes underneath the floor carpeting in front of the rear seat. Remove the rear seat bottom cushion and pull the carpet forward and you will see them. Inside the cover identifies what fuse is for what function. Hopefully it is a blown fuse, otherwise my guess would be a short in the wiring some where.
Posted on Jan 17, 2009
Dumb question, are you sure you are using the driver one remote? Being a car dealer, some installers will power the unit to certain fuses and some times this can cause issues. He may have told you 30 but most of these guys really don;t know and they are taught once and never really know if it is a problem from car to car. It sounds like a power failure of some sort causing it to reprogram itself to original specs. I went to a NTB for a battery change and I too had some issues and to my luck the guy was a GM tech at one point. So he was able to give me a few tips. Now you may not have this luck but Maybe call a few local shops like this and ask them if the have any GM techs you can run and issue by. You would be suprised where some of these guys have come from. Especially with the layoffs and need to work, anywhere....
Hoepfully this helps.
Posted on Mar 24, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls
Posted on Sep 23, 2009
Tips for a great answer:
Apr 16, 2014 | 2004 Cadillac Deville
Aug 14, 2012 | 2004 Cadillac Deville
Apr 02, 2012 | 2004 Cadillac Deville
Feb 09, 2012 | 1993 Cadillac DeVille
Sep 08, 2010 | 1998 Cadillac DeVille
Feb 12, 2010 | 1997 Cadillac DeVille
Oct 24, 2009 | 2004 Cadillac Deville
May 02, 2009 | Cadillac DeVille Cars & Trucks
Mar 26, 2009 | 1998 Cadillac DeVille
138 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: