- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You cant check fuel pressure that way. You have to connect a fuel pressure guage to the fuel rail at the schrader valve. It should have 30-40psi when ignition is turned on. Injectors not functioning properly will cause a misfire Sounds like a fuel pump or fuel going out.
if it stahls when it hot and while ur slowing or putting it in gear i suspect the transmission torque control solenoid whicjh unplug the harness from the transmission ull be fine other wise u might have faulty fuel injectors
You need to relieve the fuel pressure, Gain access to the fuel rail, should be 4 or 5 bolts holding the fuel rail on... once you accessed and removed the fasteners, carefully pull up on the railon aboth sides.. a little wd may help release the injector seals, and you definitely wanna replace the lower o-rings... be careful liining the injectors up when u install the rail