Question about 2001 Opel Corsa 1.7

Open Question

Need torque settings for big end bearings and con rods for a 2001 1.7l diesel corsa bakkie (vawxhall)

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 15756 Answers

SOURCE: timing marks on engine

Use the timing marks on the damper for the crank and bring it to 0 on the cam there are marks that correspond with a mark on the head. Look on autozone dot com and put in the year make and model then look at the free repair guides.

Posted on Oct 10, 2012

Ad
emissionwiz
  • 76164 Answers

SOURCE: Hi can you help me with torque settings for main and big end bearings for 1.4 opel corsa

Connecting rod cap bolts (you must use new bolts)
stage 1 ... 25 Nm (18 lb ft)
stage 2 ... angle tighten + 30 degrees

Main bearing cap bolts ( you must use new bolts)
stage 1 ... 50 Nm (37 lb ft)
stage 2 ... angle tighten + 45 degrees
stage 3 ... angle tighten + 15 degrees

Posted on Jun 21, 2016

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the torquo setings for opel corsa 1.4 utiliti bakkie main bearing caps and big end bearing caps


The settings should be in the manual . Rule of thumb for torque is 45 ft lb on the big ends and 65 for the mains. Sorry, don't know the metric specs, but you can check on the internet for a conversion table, just google "conversion table" and you will find the answers. You need to convert between ft lb and Kg Meter - or something!!

Aug 29, 2017 | Opel Cars & Trucks

2 Answers

CYLINDER HEAD AND BIG END BEARINGS TORQUE SETTINGS FOR OPEL CORSA 2005 1.6LT PETROL MODEL SOUTH AFRICA


i think the 1.6 ltr was only for some markets the engine i think it may be is! cyl head head with new bolts, 25nm +90 +90 +90 + 45 degrees the big end/conrod bearings 25nm +30 degrees thats if it a vauxhall/general motors engine. it may not be

Sep 29, 2016 | 2005 Opel Corsa 1.6

1 Answer

Hi can you help me with torque settings for main and big end bearings for 1.4 opel corsa


Connecting rod cap bolts (you must use new bolts)
stage 1 ... 25 Nm (18 lb ft)
stage 2 ... angle tighten + 30 degrees

Main bearing cap bolts ( you must use new bolts)
stage 1 ... 50 Nm (37 lb ft)
stage 2 ... angle tighten + 45 degrees
stage 3 ... angle tighten + 15 degrees

Jun 21, 2016 | Opel Cars & Trucks

1 Answer

What are torque settings for the main bearing bolts and con rods on a ford/Mazda w e series 16 valve turbo diesel motor?


main bearings will be about 70lbs and the con rods about 40lbs ,my manual is in the garage not at home sorry

Oct 06, 2015 | Cars & Trucks

1 Answer

Hi do i need to replace the main bearing and the conrod bearing bolts on the opel corsa 6W engine 2006 model


it is good mechanical practice to replace all bolts that are operating under tension. That includes con rod bolts , big end bolts fly wheel bolts , head studs and crank shaft bolt. Some manuals recommend the replacement of cam shaft sprocket bolts as well. This practice is recommended where the engine is driven at high rpms. It is recommended practice because the tension effect actually twists the bolt and this combined with the tensional stress makes the bolts prone to failure. As it adds considerably to the cost many mechanics do not follow the practice but will charge for the new bolts as well.

Dec 01, 2014 | 2008 Opel Corsa 1.4

1 Answer

What is the big end torque settings on a daewoo lanos 1600


Connecting Rod Bearing Cap Bolts
25 + 30 degrees+ 15 degrees big end
18 + 30 degrees+ 15 degrees little end

Aug 05, 2014 | 2000 Daewoo Lanos

1 Answer

HI HILUX SURF WITH 2LT DIESEL ENGINE CAN I GET CORRECT TORQE FOR. 1-TORQE FOR HEAD BOLT? 2-TORQE FOR CON ROD BEARING BOLT? 3-TORQE FOR MAIN BEARING BOLT?


Torque Settings Mains = 108NM
Big Ends = 54NM + 90° +90°
Flywheel = 122.5NM
Cylinder Head = 78 NM + 90° + 90°

Valve Settings
Exhaust = 0.40 mm - 0.50 mm
Intake = 0.20 - 0.3 0mm

Jun 30, 2011 | Toyota 4Runner Cars & Trucks

1 Answer

I need the torque specs for the main and rod bolt for a 99 escort 2.0l engine


engine tightening torques
Main bearings Renew bolts/nuts No
Main bearings Stage 1 43 Nm
Main bearings Stage 2 85 Nm
Big end bearings Renew bolts/nuts Yes
Big end bearings Stage 1 15 Nm
Big end bearings Stage 2 90°

Jan 21, 2010 | 2004 Ford Focus

2 Answers

WOULD YOU KNOW THE TORQUE SETTINGS FOR MAIN BEARING AND BIG END BEARING CAPS FOR ISUZU 4JG2 ENGINE


Mains Stage 1 83nm
Mains Stage 2 167nm

Big ends Stage 1 29nm
Big ends Stage 2 45 - 60 degrees

Hope this helps

Jul 10, 2009 | 1994 Isuzu Trooper

Not finding what you are looking for?
2001 Opel Corsa 1.7 Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Opel Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Brad Brown

Level 3 Expert

15729 Answers

george parkes

Level 3 Expert

975 Answers

Are you an Opel Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...