Audi 2010 outside drivers handle removal? Q7 model front door left side?

Question edited for clarity, year make model.
Question moved to Audi Q7.

Audi Q7 (4L; 2007-2015) fuses and relays

https://fuse-box.info > audi > audi-q7-4l-2007-2015-fu...
Here you will find fuse box diagrams of Audi Q7 2007, 2008, 2009, 2010, ... Assignment of the fuses and relays in the engine compartment (diesel engine) ...

Fuse box diagram Audi Q7 and relay with assignment and ...

https://fuseandrelay.com > audi > q7
Description of fuse boxes and relays Audi Q7, their locations and diagrams. ... V12 TDI: Coolant circulation relay after off. engine -J151- (V6 FSI from ...
‎Passenger compartment · ‎Front right fuse box · ‎Relay and fuse box in the...

Fuses and relay Audi Q7

https://fusesdiagram.com > audi > fuses-and-relay-audi-...
For the Audi Q7 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 model year. Cigarette lighter fuse - (fuse box in Right cockp it : fuse panel, fuse ? ...

YOU NEED A NEW INSIDE DOOR HANDLE,WILL HAVE TO TAKE COVER OFF TO DO.HERE'S ONE FOR YOU. For Ford Fusion Milan Zephyr MKZ IF29291 Front Left Inside Door Handle... HERE'S A LINK ON HOW TO REPLACE YOUR DOOR HANDLE. DIY How to replace your 2006 2012 Ford Fusion Interior Door Handle Group 1...

I think you have to partially remove the door trim to get to the back of the handle. I found some potentially useful references on YouTube. Search "Audi door handle removal"

check arm rest for screws,remove door handle ,check for screws or clips around edge of trim,prise off carefully with a screw driver.

You need to take the car to Main Dealer, you may also need to Check the car is case it draining the battery (

Fortunately, it means that the mechanicals of the door opening device are working right, if you can open from the inside. The rigid wire that connects the outside handle to the door opening mechanism became loose, or a plastic connector broke. Disassemble the door panel, reach the handle from the inside, and see if there is a thin rod dangling somewhere, and if not broken, just put it back in place.

On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can disconnect the linkage connecting to the outer handle and remove the bolts securing the outer handle on

You need to use a small hook. Push it into the hole on the inside of the door where the round bung is. Push forward on the plastic so it moves towards the front of the car then turn the hook towards you and pull back it shoould move a slide so you can remove the handle extension, you dont have to remove the colour coded cover from the outside.
Hope this helps.