Question about 2007 Infiniti M35 Sedan
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Take the wheel off the side with the burnt out bulb. Next pull the 6 plastic rivets out of the front fender well shield. Take the screw out of the shield above the 3 rivets along the inside of the fender edge, Pull the shield back starting at the top where it's tucked under the back portion of the liner shield. Unscrew the top plastic cover, twist the connector counter clockwise and pull it off the bulb. Then unclip the bulb and pull the bulb out noting the groove position for reinstalling the new bulb in the housing. There is nothing simple about your bulb change. The dealer price of the bulb is around $245.00. Don't break the new bulb trying to guess when it's seated properly!
Posted on May 18, 2008
Look directly behind the headlight box if there is a rubber sleave covering the plug take it off. Unplug the wires from the bulb, there may be a saftey clip you will have to pry up to get it off.after you get the plug off the bulb holder should twist counterclockwise then it will pull right off.When you change the bulb just remember to wipe your body oil off the bulb before attaching it back into the headlight box. Then plug it back in and your in business. The high beam has three wires and the low beam has two wires. The bulb will have to be the right one.
God Bless You Greg
Posted on Nov 25, 2008
The headlamps are non adjustable. Because they are xenon, the government mandates that consumers not be able to adjust. It is a safety issue, and most dealers won't adjust them either. As far as changing the bulb, that shouldn't be to big a deal, just depends on how the bulbs are secured. Some have a round cap that unscrews, and some have a complicated pain in the rear metal clip. You just have to make sure if you get the bulb out not to touch it, because the oil in your skin will cause the bulb to pop. And I wouldn't suggest using any aftermarket blue lights or anything like that, I have seen several occasions where that type of bulb ran too hot and melted the wiring pigtail.
Posted on May 08, 2009
It is really not that difficult for an 01 qx4, and if you order the bulb online you'll save enough money that if it takes you two or three tries (and bulbs) you'll still save over what the dealer or a mechanic would charge you:
Don't touch anything on the new bulb besides the plastic base (don't touch the glass!)
1. Make sure you disconnect the battery before anything else (you don't want to get shocked by these high voltage babies). If you're replacing the passenger side bulb, take the battery out for more room to work, especially to see what's going on in there (you can undo the air filter case on the drivers side for the same benefit, again--disconnect the battery first). 2. Find and unscrew the round, black, plastic lid behind the headlight, it's up and to the left. 3. You'll see a shiny metal connector with electrical warnings printed on it and Michael Jackson glove looking wiring attached to it. Turn that gently to the left to open up access to the actual bulb (you'll now see the bottom/back of the bulb--a black circle with a small metal tip in the middle). 4. Unhook the two metal braces that hold the bulb in place (push in gently to let wire out--kind of like unhooking a bungee cord or unsetting a mouse trap). 5. Pay attention how the two divots on the bulb case line up with the little nubs at the top of the encasing (you have to put the new one in lining up the same way.) 6. You can now take out the bulb. You might consider practicing the replacement sequence with your old bulb that you just took out before sticking the new one in there--just to get the hang of it so you aren't banging the new one around. 7. Once you've got the bulb back in there just put everything else back in place in reverse order. 8. Wash those dirty hands and try turning on your lights. 9. Go celebrate your automotive victory by driving somewhere at night!
Posted on Aug 28, 2009
Tips for a great answer:
Aug 18, 2014 | 2006 Infiniti M35
Apr 29, 2014 | 2007 Infiniti M35 Sport Sedan
Jan 18, 2011 | 2004 Infiniti QX4
Aug 02, 2010 | 2006 Infiniti M35
Jun 23, 2010 | Infiniti Q45 Cars & Trucks
Feb 04, 2009 | 2006 Infiniti M35
Nov 25, 2008 | Infiniti QX4 Cars & Trucks
May 18, 2008 | 2006 Infiniti M35
84 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: