Question about Chevrolet Blazer

Open Question

How to change blend door actuator in 2008 trailblazer

On drivers side

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Blend door

ok first put you front seat down and back raise steering wheel . now lay on you back with you head in the drivers floor board. look up see 2 screws remove them and the panel they hold on . look to left main wire harness needs to be moved to the right , up and behind it is th blend actuator 7/32 socket to remove it then manually turn the white peg , total labor 30 min

Posted on Dec 15, 2008

Ad
honeymokey
  • 3113 Answers

SOURCE: air blend door

Replace the broken actuator.

Posted on Apr 15, 2009

  • 1 Answer

SOURCE: Replace Blend door on 2004 Suburban

My problem is hot air on the drivers side, cold on Pass when the AC is on...2004 Sub

Posted on Nov 06, 2009

  • 5 Answers

SOURCE: how to replace blend door actuator in a ford

I recently did mine, I hear you can do it without taking the entire dash apart but I had no luck with it myself. I have to get ready for work but, on mine it was located down and to the left of the radio. its a white box...are you hearing a clicking noise or something? I had to roll the entire dash back and it was still a major pain getting it out.

Posted on Dec 07, 2009

cris_p
  • 62 Answers

SOURCE: cannot open fuel door with, driver side door remote actuator.

the fuse is probably bad

Posted on Feb 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is rhe air temp. Door actuator in a 2003 ford 450 truck


Ford Superduty Erratic Temp Blend Door Actuator Removal - YouTube

? 12:29
https://www.youtube.com/watch?v=dYPOtin3JUk
Dec 1, 2013 - Uploaded by FordTechMakuloco
Only buy the Ford Actuators, you can get them cheaper here- ...

Simple how to fix blend door heater a/c actuator 2002 - 2008 ford ...

? 7:12
https://www.youtube.com/watch?v=EEWuJuhCtmc Aug 24, 2013 - Uploaded by kirk colombo
Simple how to fix blend door heater a/c actuator 2002 - 2008 ford explorer noise .... I literary just finish ...

08-10 Super Duty Blend Door Actuator Location - Dual System ...

? 1:24
https://www.youtube.com/watch?v=s7awF2fTKf4 Mar 22, 2012 - Uploaded by srmastertech
Here is a quick view showing the location of the temp blend door actuators on the Ford Super Duty's with ...

Ford blend door fix - 15 minutes - YouTube

? 3:22
https://www.youtube.com/watch?v=wsjGxreGlkA Jul 21, 2013 - Uploaded by SoonersWarriors
Ford blend door fix - 15 minutes. SoonersWarriors. Loading ... Ford Vehicles: Frequent Blend Door Actuator ...

Blend Door Actuator Ford Super Duty 08-10 - YouTube

? 9:45
https://www.youtube.com/watch?v=mbzjCPYENZQ Oct 4, 2013 - Uploaded by MostExcellentDude
This applies to 2008-2010 F250 and F350 with the dual climate control. This video shows the locations for the ...
blend door actuator 2003 ford f450 Google Search




Aug 16, 2017 | Ford Cars & Trucks

1 Answer

Where is drivers, mode door and blend door actuators located


Blend air door actuator (temp)on left side of heater box near the gas pedal below it may be the mode door & passenger side has a temp door actuator for that side.

Nov 21, 2015 | 2000 Dodge Caravan

1 Answer

How do i fix a stuck blend door on 2010 dodge nitro?


I would pull off the blend door actuator and swap it out with a new one. Or another option is to swap it out with one of the other actuators. The blend door actuator is interchangeable with the actuators for the mode-air doors and the recirculation-air door.

Disconnect and isolate the negative battery cable.

If equipped, remove the silencer from below the driver side of the instrument panel.

Disconnect the wire harness connector from the blend door actuator located on the driver side of the air distribution housing.

Remove the two screws that secure the blend door actuator to the actuator mounting bracket and remove the actuator

Feb 17, 2015 | 2010 Dodge Nitro

1 Answer

08 dodge nitro blows hot air on passenger side but cold air out the drivers side!! Any answers




NOTE: LHD model shown. RHD model similar. All vehicles are equipped with a common heater, ventilation and air conditioning (HVAC) housing assembly (1). The heating-A/C system combines A/C, heating, and ventilating capabilities in a single HVAC housing mounted within the passenger compartment behind the instrument panel. The HVAC housing assembly includes:
  1. Mode-air doors (2)
  2. A/C evaporator (3)
  3. Recirculation door actuator (4)
  4. Air inlet housing (5)
  5. Recirculation-air door (6)
  6. Blower motor (7)
  7. Blower motor resistor (8)
  8. Heater core (9)
  9. Air distribution housing (10)
  10. Blend-air door (11)
  11. Blend door actuator (12
  12. Floor distribution ducts (13)
  13. Mode door actuator (14)

Jan 28, 2015 | 2008 Dodge Nitro

1 Answer

Why does it blow hot air thru drivers side and cold thru passengers side


You have a problem with either the blend door actuator of the door itself.

Jul 09, 2014 | 2008 Chevrolet Impala

1 Answer

2003 chevy trailblazer blows cold air on passenger side and hot air on driver side


Sounds like a blend door actuator failure,11_24_2012_3_52_06_am.jpgMight as well replace both sides

Nov 24, 2012 | Cars & Trucks

3 Answers

Driver side blowing hot air passenger side blowing cold air


I'm having the same problem except on mine it's the driver's side that's blowing cold. Do you have the pictures in a finer resolution? I can't make them out and when I zoom, they are too grainy. Does the replacement require removing the dashboard? What's the general cost of the acuators? Are they readily available at like NAPA or other parts stores?

Nov 26, 2011 | 2006 Kia Amanti

1 Answer

I am working on a 2003 Chevy Trailblazer and the vents just blow out warm air, and will not change to the defost vents or the floor vents. Can this be the blend door actuator? And if so where is it


yes it could be the blend door, could be broken, or the actuator, or could be the climate control too, if you know where the heater core is then you just found the blend door, goodluck. Thanks

Oct 23, 2011 | 2003 Chevrolet TrailBlazer

2 Answers

Where is the driver side blend door actuator on a 98 Seville STS?


I believe that the right side has a blend door actuator, and the left side or driver side just gets air from the regular flow from the programmer and vacuum motors.

Dorman/Blend Door Actuator
Part Number:
604-106
btn-view-details.png Price: $139.99
Notes: Dorman-OE SolutionsTemperature door. Right

Oct 29, 2010 | 1998 Cadillac Seville

1 Answer

There is heat coming out on the driver side not the passinger side


there is a blend door if it has split temp controls . Ether door hinge is broke or door actuator is gone bad. The part that moves the door. to locate actuator try here kslib.info goto I'm looking for and choose auto repair.

Jan 16, 2010 | 2002 Chevrolet TrailBlazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

581 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

80339 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...