Question about 2006 Chevrolet Impala

2 Answers

I need a serpentine belt routing diagram.

I can't find a Haynes manual etc available yet. The car is a 2006 Impala SS with the 5.3 liter. Does anyone have a routing diagram they can send me via e-mail?

Posted by on

  • Anonymous Jan 18, 2009

    I have the same problem and NO their was no diagram under the hood on my car either.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hood has been replaced

Posted on Jan 22, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,990 Answers

Being that New, You should have a Sticker Under the Hood that Gives you the Exact Routing of that Belt.

Posted on Jan 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Serpentine belt diagram for a 2003 Chevy unpalatable 4.3


Pop the hood of the car and locate the serpentine belt routing diagram. The diagram on the 2003 Chevrolet Impala is on top of the fan shroud. The diagram will be a picture of all of the accessory pulleys and how the serpentine belt is routed among the pulleys. This diagram will give you the exact direction for routing the new belt onto the pulleys. If you cannot find a serpentine belt routing diagram, take a notepad and pen and draw out the exact routing diagram of the old belt across the pulleys.

  • 2 Locate the serpentine belt tensioner. It is located below the alternator on the left front side of the engine. The tensioner on the 3.4 liter, 3.5 liter and the 3.9 liter engines will require a 3/8 ratchet to release the belt tensioner. The 3.8 liter engine will require a ratchet and a 15 mm socket for the belt tensioner. Rotate the belt tensioner clockwise to loosen and remove the belt from the belt tensioner pulley.
  • 3 Slide the old belt from the belt tensioner pulley. Remove the belt from the remaining pulleys and pull the belt from the engine compartment.
  • 4 Route the new belt across the crankshaft pulley first. The crankshaft pulley is the big pulley on the bottom of the engine in the center. Then route the serpentine belt across the remaining pulleys as directed by the serpentine belt routing diagram. Leave the belt tensioner pulley for last.
  • 5 Rotate the belt tensioner clockwise again to relieve the tension and slide the new belt across the top of the belt tensioner pulley. Release the belt tensioner and the belt will tighten up as the tensioner applies pressure to the belt. Make sure the new belt is properly seated in all the pulleys.
  • 6 Crank the engine and inspect the belt again to make sure that it stays seated in the pulleys.

  • Read more: How to Replace a Serpentine Belt on a 2003 Chevrolet Impala ' eHow.co.uk http://www.ehow.co.uk/how_6120665_replace-belt-2003-chevrolet-impala.html#ixzz1Yi6QLAjb

    Sep 21, 2011 | 2003 Chevrolet Impala

    2 Answers

    I need the serpentine belt diagram for a 3.8 2003 Impala.


    There should be a diagram of the belt routing under the hood somewhere. clay58_53.png

    Jul 03, 2011 | 2006 Chevrolet Impala

    1 Answer

    Is the serpentine belt diagram the same for a 2006 Chevy impala SS 5.3 as it is for a 3.9?


    No, not even close. I have included belt routing diagrams for both. The first one should be the SS 5.3L which has a lot more pulleys.

    Hope this helps. Good luck !duckfreak871.png duckfreak871_0.png

    Apr 13, 2011 | 2006 Chevrolet Impala

    2 Answers

    Serpentine belt diagram 2006 impala ls


    Go to the web site below(copy and paste the web address to your browser):

    http://www.daycoproducts.com/daycoweb.nsf/cf652a4feb630ad0862571a4005ae40c/a866a821123f887c862571a5006988df!OpenDocument

    There are 2 PDF documents (above the photo) to look up. The first - Routing Guide - gives you the diagram code for the vehicle - 6 cylinder engines . See page 14 for the 2006 Chev Impala. Diagram code 9-15.

    Diagram 9-15 can be found in the second PDF - the iIlustration Guide.

    Hope this helps.
    Cheers
    Sean
    Voluntary contributor.

    Dec 13, 2009 | 2006 Chevrolet Impala

    2 Answers

    I need a serpentine belt assembly guide or diagram for a 2006 3.5 liter v6 chevrolet impala


    Diagram 9-5 on this page:
    http://www.daycoproducts.com/daycoweb.nsf/Serp%20Rout%20Guide%20Illus.pdf

    May 09, 2009 | Chevrolet Impala Cars & Trucks

    2 Answers

    Need a diagram for serpentine belt 1998 Ford Contour 4cyl 2.0l.


    98 ford contour 2.0 belt routing

    here is a picture of routing and how to do it , etc. , good resource ..

    J5

    Jan 19, 2009 | 1998 Ford Contour

    Not finding what you are looking for?
    2006 Chevrolet Impala Logo

    1,505 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    71231 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22059 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7001 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...