Question about 1993 Plymouth Voyager
1995 plymouth voyager temperature gauge is not working atall
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the speedometer cable broke! thats what your odometer runs off too and they route into the transmission so maybe try looking there for the problem.
Posted on Apr 17, 2009
you have to replace the " body control module " located under dash drivers side. and most of time they have to be reprogrammend unless you buy it new from dealer and they do it before you get it. the body control mod controls all those items and go bad alot.
Posted on May 25, 2009
There has been issues with the solder joints on the PIN connection to the gauge cluster. The issue being that over time thru vibration and such one of these solder joints will fail (happened on or 1999) you can repair this though. You will have to remove all of the trim from around the driver's side dash board, this will include the trim towards the center of the dash. Once these pieces are remove you'll need to remove the gauge panel (I believe (4) allen head screws) carefully bring the panel and release the wire clip from it. Looking at the back of the panel, where the plug was, carefully with plenty of light look for one of the pins to have a failed solder joint. It will be very faint however the failed joint will be a fine dark line around the pin. To correct use a small soldering iron and reheat this solder until it wants to flow, let it cool and reassemble.
As I fore mentioned I had the exact same issue as you are describing, our is a 99. The most tricky part is the dash, take your time with it.
I hope this may have assited you,
Posted on Oct 18, 2009
In the event that you have not completely fixed this problem, I suggest the following: Do a google search for "98 voyager instrument cluster solder" and you will find an abundance of posts regarding the soldered joints on the main terminal connector on the back of your instrument cluster. If the behaviour is at all erratic and unpredictable, or hitting the dash makes the gauges come back to life, then you are about 99.9% sure it is the solder problem. It takes about 8 minutes to remove the instrument cluster (okay maybe 15), and about 2 minutes to remove the circuit board. By examining the solder joints of the main connector with a magnifying glass, you will probably see cracked or corroded solder on them. Briefly reheat each solder joint with a soldering iron to re-flow the solder. Your erratic gauge behaviour should now be history.
Posted on Aug 12, 2011
Tips for a great answer:
Jul 03, 2012 | 1999 Plymouth Grand Voyager
Jun 28, 2010 | 1995 Plymouth Voyager
May 08, 2010 | 1999 Plymouth Voyager
Nov 23, 2009 | 1997 Plymouth Voyager
Jul 21, 2009 | 1995 Plymouth Grand Voyager
Feb 12, 2009 | 1999 Plymouth Grand Voyager
Aug 17, 2008 | 1992 Plymouth Voyager
118 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: