Question about 2003 Toyota Corolla
Starter makes no noise and does not indicate its getting any signal to start during this outage time.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
hi you will find that the cold start injector is not working it is found near the throttle bodyand injects fuel to start when cold like aq choke on older cars . it may need replacing i suspect that it is either blocked or just worn out they are not expensive
Posted on Mar 15, 2009
It looks like you have an issue with the starter not engaging the flywheel correctly. Does it make a BrrrrRRRRRRRRRRP noise? Best advice: Replace the starter. Do not get it rebuilt. If you replace the starter ASAP, you may be OK. If not, you are going to have to have the transmission pulled, and you will have to replace the flywheel; that is what is being damaged by the bad starter drive. This is, unfortunately, a common issue.
Thanks for choosing FixYa for advice!
A FixYa rating (4 blue diamonds) would be most appreciated, this is how we are scored. Thanks in advance.
Posted on Apr 07, 2009
The starter won't get hot while the car is running. The starter only works while you are cranking it over. After running a while and the car is hot, feel if your battery is not over heating. If the vaultage regulator in the alternator is bad the battery may be overcharging causing it to over heat and not want to work when boiling. After it cools down it may work again.
I this will help.
Posted on May 15, 2009
SOURCE: 1997 Toyota Camry won't start
The starter has two L-shape copper plates. These copper plates get used every time you start the car. After certain period of time the plates are so thin that no contact is made. So the car doesn't start. So your copper plates could be worn out. I had my replaced. And the problem is gone. If you know a good mechanic, you'll probably get fix for less than $100.
It's a common problem on Camry. They wear out prematurely.
Posted on Jun 18, 2009
had a similar problem with with my 4runner.replaced most of the fuel and ignition systems with no luck.finally traced the problem to a bad connection between the main relay and the fuel pump.there's a wire harness connection between the back of the gas tank and rear axle.I just replaced it with a solid run from the fuel pump and the relay.haven't had any problems since.
Posted on Feb 09, 2010
Tips for a great answer:
Oct 15, 2016 | Mercury Cars & Trucks
Dec 17, 2015 | Cars & Trucks
Nov 23, 2015 | 2001 Mercury Grand Marquis
Apr 01, 2014 | 2002 Toyota Camry
Jul 26, 2013 | Cars & Trucks
Mar 11, 2013 | Cars & Trucks
Feb 08, 2011 | 2000 Toyota Camry
Aug 17, 2010 | 2005 Ford Taurus
Aug 05, 2009 | 1998 Plymouth Voyager
Jul 02, 2008 | 2001 Mercury Mountaineer
Mar 18, 2015 | 2003 Toyota Corolla
57 people viewed this question
Usually answered in minutes!