Question about 2004 Chevrolet Impala

Open Question

2004 impala turn signal flasher - 2004 Chevrolet Impala

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
carsandcomps
  • 722 Answers

SOURCE: signal flasher replacement for 94 impala ss

It is possible that one or more bulb is the wrong type. Make sure that all turn signal bulbs are the correct ones and have the same number on them (i.e. 1156;1157 etc.) You can look this up at an auto parts store, or have a sales representative look it up for you. If they are all the same, check all the light sockets for white residue, rust, and corrosion. Also check the wiring for frayed or burned (melted) insulation. Replace any damaged wires or sockets, or bulbs.
I hope this information helps you in fixing your lights. Thank you.

Posted on Apr 01, 2009

Ad
  • 39 Answers

SOURCE: Turn signal flasher location for a 2004 Chevy

IN THE HARZARD BUTTON

Posted on Jul 24, 2009

Zeevert
  • 373 Answers

SOURCE: turn signal flasher location 2004 impala

There's usually a different flasher for the hazard lights (4-way) and the turn signals. But, for either flasher to go bad is very rare. If the flasher is bad neither right nor left signal will work. If only one side doesn't work, it's not the flasher.... then I'd really check the bulbs first.
And sorry, I don't know where the flasher is.

Posted on Oct 31, 2009

  • 3 Answers

SOURCE: turn signals on my 2002 chevy impala stop working

The relay switch is a plug-in located inside the dash near the tach about 2 O'Clock You will need to open the dash panel to replace it and your turn signals will work.

Posted on Dec 01, 2009

  • 84 Answers

SOURCE: where is the flasher located in a 2006 impala

under the dash...driver side close to fuse box(behind)

Posted on Apr 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

How to replace turn-signal flasher 2004 impala


Make sure you check the turn signal fuse, located at the driver's end of the instrument panel. You have to open the door, take out a screw, and the panel pops off. The 4th fuse down on the 3rd row from the left is marked TRN-SIG.

Aug 04, 2014 | 2004 Chevrolet Impala

1 Answer

2002 impala,intermittent turn signals, push 4 way flasher button and they will work most of the time. how do you get the 4 way flasher switch out of the dash?


RARELY IS THE 4 WAY SWITCH AT FAULT . CHECK YOU FLASHER WHICH IS AN ALUMINUM CYLINDER PLUGGED IN AT YOU POWER DISTRIBUTION BOX. CHEAP PART TRY IT FIRST. COMBO SWITCH IS NEXT THING TO CHECK. WHERE DIMMER AND WIPERS ARE ON THAT STALK

Oct 31, 2013 | 2004 Chevrolet Impala

1 Answer

The turn signals and flashers don't work,I checked the fuse and it;s still good.2003 Dodge Durango SLT


Hello Idweasel,

I see that you said that you checked all the fuses, but your flashers really does not consist of a complex system, you have a fuse that sends power to the flasher relay that's on the passenger side of the vehicle (side of the dash) and a flasher relay. If the fuse is good try replacing the relay inside the fuse panel. Is this for your Durango or the Impala?

Jul 17, 2011 | 2004 Chevrolet Impala

1 Answer

Hazard/turn signal dont work 2002 monte carlo will not fash nor turn on once in a while indicator light blink for a slight second


you could have a bad flasher unit causing this.you say hazard/flasher not working.do you mean just the signals not working and think the hazards won`t work or are the hazards not working.there are two flasher units one for signal and one for hazards.you could have a problem with the signal switch as well.

Jul 05, 2011 | 2004 Chevrolet Impala

2 Answers

The turn singnals don't flash on my 2004 chevy impala


It's time to replace the flasher relay.The signal flasher is located under the dash near the steering column.Also check for the indicator bulb.Replace them if damaged.
Front Turn Signal Light Bulb Size: 3457ALL
Rear Turn Signal Light Bulb Size: 3057
Hope this helps.Your valuable feedback would be appreciated.Thanks

Jun 11, 2011 | 2004 Chevrolet Impala

2 Answers

Turn signals don't flash, they just go on solid


You may have a bad socket or bulb either in the front or rear replace if you find the one that is not working. May also be your flasher hit your emergency flashers and if those do not work suspect the flasher.

Oct 11, 2010 | 2004 Chevrolet Impala

2 Answers

Turn signal flasher location 2004 impala


It should be in the hazard button, You have to pull it out and replace it. Try the junk yards they dont cost alot.

Oct 09, 2009 | 2004 Chevrolet Impala

2 Answers

04 impala turn signals stop and starti ntermitently


The turn signal flasher is built in to the hazard switch. They are common for going bad. If the turn signals quit again, try pushing the hazard switch on and off a bunch of times really quick. If the turn signals start working again, replace the hazard switch

Aug 31, 2009 | 2004 Chevrolet Impala

Not finding what you are looking for?
2004 Chevrolet Impala Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

78289 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...