Question about GMC K1500
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: spark plug wiring diagram
I dont understand why you would need that unless you took off all the wires and took out all the plugs and forgot how the wires were.I have the same truck and I always do the plugs and wires one at time to make sure I make a mistake.If this is your ploblem let me know because i might be able to walk you though it.
Posted on Jan 22, 2009
Chanses are it broke behind the gas tank wear it runs along the frame rail. You don't need a diagram to fix that, just unhook it at both ends and break it off or cut it off buy the tank and take the pieces with you to a auto parts store and they will match it up with new line, just take a tape measure and measure from the rear axel to the front block or perportioning valve, and don't worry about the piece behind the tank, just run the new line alongside the old one behind the tank unless you want to pull the tank out.
Posted on Sep 06, 2009
Check coolant level. Check for heat at the heater hose going from water pump to heater core at firewall. Check to see that cable is moving coolant control valve from the closed to open position. Low mileage so it shouldn't be plugged heater core.
Posted on Jan 07, 2010
Testimonial: "You were absolutely correct. Low coolant level. Put in some 50/50 and we're nice and toasty now, but need to find out why coolant was so low. Thanks."
May want to look at replacing the wiper circuit board.It is located on the firewall adjacent to the wiper motor and has a some what square black cover with 3 torx screws and wireing harness pluged into the side.We had a truck that every time you washed it the wipers would stay on until it dryed out.You can try removing it and spaying it down with contact cleaner just watch the brease on the two contact tips.Well hope this helps.
Posted on Feb 05, 2010
please go to the link below, it is belt routing catalog, just look up your model and engine and go to the diagram number stated.
It is a large PDF file allow time for it to load.
Posted on Oct 28, 2010
Tips for a great answer:
Aug 08, 2015 | 2005 GMC Sierra 1500
Aug 08, 2015 | GMC Cars & Trucks
Jan 21, 2013 | 2010 GMC Sierra 1500
Jun 02, 2010 | 2000 GMC New Sierra 1500
Apr 01, 2010 | 1995 GMC Sierra C1500
Nov 14, 2009 | GMC Sierra 3500HD Cars & Trucks
Oct 04, 2009 | 1994 GMC Sierra
Sep 12, 2009 | 1989 GMC Sierra
136 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: