Question about 2003 Toyota Camry
Only the high beam on the driver side is working I have change fuses in the fuse box inside and under hood. I have change bulbs, Brought threw new ones still nothing. Please help I am clueless here.
Real simple clueless
Save yourself all the worry & guessing -while throwing
parts at it & have a repair shop resolve.
The only reason there are 300 or more people here a day,
is because they know nothing & do nothing-- to resolve these
type problems, with any product
Posted on Dec 06, 2012
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: camry headlights not working
Have you checked out the switch itself? Seems like the problem might be there.
If the lamp bulbs are sill intact, that's probably the most likely solution. There's a possibility you have a short somewhere in the switch relay that will allow the highlights to turn on but not the low beams.
Posted on Mar 25, 2010
Tips for a great answer:
May 10, 2014 | 1999 Toyota Camry
Apr 10, 2013 | 2003 Toyota Camry
[Information] For a 2002 Toyota Camry, the Daytime
Running Lights (DRL) operate utilizing the High Beams (inner Lamps closer to
the center of the vehicle front) at a reduced power.
[The troubleshooting process:] Review the Owner's Manual and ensure the test
configuration matches the following criteria:
1. According to the 2002 Toyota Camry Owner's Manual (Check your Owners Manual):
"The DRL system will make your headlights come on at a reduced brightness when:
The light switch s in the "DRL" position.
The ignition is on with the engine running.
The headlight switch is off.
The parking brake is released."
2. Set the Test Conditions according to Step 1 above.
3. Check the headlight bulbs to ensure they are not
burned out. If one burns out, there is a fair chance that the other would have burned
out at the same time. Replace as necessary.
In this case, if the high beams operate, the DRLs should also operate.
4. Test the system, ensuring the step 1 conditions are set. (Engine running, Multi-function Switch on Turn Signals in "DRL" position, headlight switch off (repeating what the manual says -- it should be obvious that in the "DRL" position, the headlight switch should be off / do not have the switch positioned to "High Beam"), and the Parking Brake "off").
5. If DRL lights do not work, check the engine compartment Fuse and Relay Box. there is a 5 Amp DRL fuse -- replace it with the spare. Test (step 4).
6. If it does not work, swap around or replace relays -- there are three (3). Any one of them could be bad (stuck or burned out). Test (step 4).
7. Other less likely possible issues could be that the Multi-function Switch is broken or a connection / wire is broken. [Beyond the scope of this process.]
My problem was that the test configuration did not have
the engine running and parking brake off - Step 1. Problem solved with much
thought, repetitive tests on the vehicle and going back to the basics -- what
does the Owner's Manual say and where are the applicable fuses and relays
Dec 30, 2011 | 2002 Toyota Camry
Jun 14, 2009 | 2001 Toyota Camry Solara
Feb 01, 2009 | 1987 Toyota Camry
Jul 31, 2008 | 1994 Toyota Camry
110 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: