Question about Suzuki Cars & Trucks

Open Question

I have a 1986 suzuki alto with a low foot brake reading on the right rear wheel. Hand brake reads fine . seams like proportioning valve. I have no workshop manual . Were is this lokated on the vehicle and can i recondition the valve myself? Also do they have a part number and were could i get one?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
cmccune04
  • 213 Answers

SOURCE: Rear Brake Proportioning Valve

Used GEO Parts Leads May 28, 2008 (i.e. Wheel, Seat Belt) 1990 GEO Tracker, SUV, 4-Cyl, Gas/Carburetor, Automatic, 4x4, Any Brakes, Rear, Brake Proportioning Valve which mounts on rear axle (Raleigh, North Carolina ...
www.automotix.net/20080528-used-geo-parts.html


Copy this link I found it on a google search and thought of you>

Posted on Dec 21, 2008

Ad
  • 599 Answers

SOURCE: the ABS/proportioning valve is not working.

these trucks need a seperate bleed procedure for ABS you need a scanner to put it into this bleed mode,hope this helps if not get back to me and we'll go from there. please rate my fix as i strive to be the best

Posted on May 19, 2009

johnjohn2
  • 5763 Answers

SOURCE: How do you reset the proportioning valve on an

computer does that, or you have to have enough brake fluid preasure also, check for leaking lines (brake lines). make sure fluid is full.abs system has dump valves , if there was a problem abs light would be on. but abs might lite if not enough preasure hope this helps.

Posted on Oct 10, 2009

  • 3 Answers

SOURCE: 03 Suzuki Alto - Dashboard, tail lights not working

I have this car it has huge electrical problems. Something in the computer/alternator/etc. I have no speedometer, all my internal lights are screwed up. I've had 2 alternators, a starter and 4 batteries in 2 years. Get rid of it.

Posted on Dec 05, 2009

asemechanic
  • 85 Answers

SOURCE: Want a repair manual for

http://www.repairservicemanuals.com/Suzuki/
select the submodel and download, nice thing is you can hit CTRL F instead of lots of reading

Posted on Feb 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i replace the front wheel bearings


we dont have Altos here. in USA, but the FSM covers this.
why not buy the FSM and read it.
or go online to Suzuki parts, and see those nice graphics there.
see em.
then see what is there.
on many cars like this the bearing is unitized, in to the hub.
1: off the wheel/tire.
2: caliper, unbolted and raised.
3; hub nut off
4: slam hammer the hub from spindle.
there. its off.
but the FSM shows how to in full details. why not read that.

what country was car sold .?
Altos very greatly by country.
eg"?
The Maruti Alto is the Indian-built version of the fifth generation Alto, manufactured by Maruti Suzuki.

Feb 12, 2014 | 2010 Suzuki Alto 1.0

1 Answer

Grinding coming from back of suzuki alto


Get the wheel bearing and brake pads checked.

Oct 17, 2012 | 2005 Suzuki Alto

1 Answer

Have the same abs problem with my 1998 silver ado z71 as many have stated before. Mine will lock the back wheels at slow speeds. The abs dash light is on and seems that both front sensors are reading an...


abs systems do not lock on the brakes
they release the brakes when the wheels stop spinning and when the wheels start turning again apply the same brake pressure as before the wheels stopped spinning
check the proportioning valve to the rear brakes to ensure that it is not acting as a one way valve and that is causing the problems
if the compensating port in the master cylinder for the rear wheels is blocked that also will lock the rear brakes

Oct 22, 2017 | 1999 Chevrolet Silverado 1500

1 Answer

1975 gm pick-up need to bleed the proportional valve


All bleeding is done at each caliper and wheel cylinder. The proportioning valve has no bleeder. The proportioning valve makes the front brakes engage before the rears do to prevent the rear brakes from causing a sideways skid.

Jul 21, 2011 | Chevrolet G10 Cars & Trucks

3 Answers

Have a 1993 dodge Caravan SE. Purchased it from a man which converted it from ABS to hydraulics. I didn't know it had brake problems till i got it running. He put on a 3 outlet 2 inlet proportional...


if something goes wrong with abs the brake system it reverts back to standard system!! If you can pump brake pedal up and hold it and start engine and it drops thats normal.You say low pedal if you go 15mph on road and check where pedal is when brakes apply.Power brakes will push aLMost to floor while stopped but while moveing you`ll almost go to slide or will go into slide if pedal is pushed to floor.Get on some gravel at 10 mph and hit brakes to a complete stop get out and check to see if all 4 tires slid or 2 front or only 2 rear. this will get you closer to problem good luck.

Jul 12, 2011 | 1993 Dodge Caravan

1 Answer

Villager GE 95 liquid escape in a brake system


It is a brake load sensoing valve that applies more pressure to the rear brakes as you load the vehicle. It is $375 from tascafordparts.com. Get one from the junk yard or just bypass it.

usually just the lines are leaking and can be replaced.
Valve, Brake Load Sensor Proportioning The Villager has a brake load sensor proportioning valve (2B547) that is mounted on the vehicle frame and connected to the rear axle housing (4010) . When the vehicle is unloaded, the brake load sensor proportioning valve closes and partially reduces hydraulic pressure to the rear wheel cylinders (2261) . As the vehicle is loaded, the weight presses down the back end of the vehicle on the rear springs (5560) . This activates the brake load sensor proportioning valve which opens and supplies more hydraulic pressure to the rear wheel cylinders . When the vehicle is fully loaded, the brake load sensor proportioning valve is fully open and provides full hydraulic pressure to the rear wheel cylinders .
-------------------------------------

fb0a5fa.gif

Jun 26, 2010 | 1995 Mercury Villager

1 Answer

1998 dodge durango how to adjust brake metering block to give more fluid to back brakes?


Odds are that your brake proportioning valve is fine, you should try bleeding the brakes first starting with the farthest wheel away from the brake booster ( passenger rear ) and work your way to the nearest ( driver front). Make sure you have plenty of fluid and that your brakes are in good shape before hand.

Dec 13, 2009 | 1998 Dodge Durango

1 Answer

My chevy S10 has front discand rear drum the front brakes bleed out just fine the back just drips any solutions?


Sounds like your proportioning valve is stopping up. try opening the bleeder on a wheel cylinder, and kick the brake pedal hard a couple of times. Soimetimes this will free them up.

Jun 07, 2009 | 1986 Isuzu Pickup

1 Answer

1989 K-1500 Brake Problems


Did you replace your front brake lines as these are rubber and after time collapse causing the truck to pull in the opposite direction! In your case I'd say left front is crimped and blocks fluid and makes right front pull to the right. This is a common problem and one of the first items to replace on these trucks and at $30 cheap insurance.(REPLACE BOTH).

Mar 17, 2009 | 1986 Chevrolet K1500

2 Answers

Rear Brake Proportioning Valve


did you ask GM (trackers are GM) not all parts are same GM tracker to sidekicks ( i can name many)
suzuki sells it. and try car-parts.com for wrecker used sources.
used brakes , hummmmmm

96 is a major year, change, so watch out of wrong answers.
there are 2 valve, 2door and 4
suz pn is.
4 = 51930-56B20
2 = 51930-60A40

dont by the wrong one, or danger awaits you. and thin wallet.

1 of 2 valves here.
http://www.oemsuzukiparts.com/parts/index.cfm?make=Suzuki&year=&searchText=51930-56B20&action=oePartSearch&siteid=214330

Nov 14, 2008 | 1996 Geo Tracker 2 Door

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

77194 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...