Question about 2002 GMC Sierra 1500
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I have a 2002 Chevy 3500 and the same thing happened to me. It turns out the latching mechanism on the left side would not release when I pulled on the latch handle. I stuck a small screwdriver in there to release the latch handle (as I pulled on the latch handle) and it popped open. I then squirted some WD-40 on that latch mechanism because it was hung up. I didn't have any problems after that.
Posted on Aug 12, 2008
Defrost is the default position. Is the control a autyomatic temperture control unit? ( you set the temp and select automatic) if it is the system is completely electronic. You push the buttons and the control still says defrost or can you select something else and the control shows it but it just keeps coming out the defrost? If the control changes and the air comes out the defrost anyway and the cheack engine light isn't on, then the problem can be blown fuses or an air door actoater not working. Does the dash emit a clicking sound? if it does with the covers off the bottom of the dash reach around touching the different pieces till you touch the idem that is clicking. this is an acutor motor, or blend door motor. they have gears in them that wear out and break the motors aren't repairable and you just replace the ofending motor. the door that is moves can be stuck. and may have to be freed up with blaster, WD40, or other rust buster till it moves easy. maybe after getting the door to move smoothly you can get the old motor to move the door wiithout having to install a new one.
Posted on Jan 06, 2010
have it tested using a manual gage if still low then main baring ore most likely bad that would mean a over hall if is really low and bearings bad should be making rattle noise when started up first few seconds
Posted on Mar 11, 2010
Testimonial: "thanks alot.truck is not making a rattling noise.we did check it with a manual gauge.it read about 10 at idol. press. gets better as you incr speed"
SOURCE: ABS problem with GMC 2002 Sierra
its a low speed abs activation the problem is in the front sensors they need to be cleaned or replaced they [or one] probably has some corrosion on the sensor --[the 99 chevy tahoes had a limited recall over this issue and the fix was to remove and clean the abs sensor or if to corroded replace ] this problem doesnt set off an abs code or trouble light also sometimes the abs will activate by itself at under 4 mph without even touching brake
Posted on May 15, 2010
Tips for a great answer:
Feb 23, 2015 | 2007 GMC Sierra 1500
Nov 04, 2013 | 2002 GMC Sierra 1500
Feb 02, 2012 | 2002 GMC Sierra
May 15, 2010 | 2002 GMC Sierra
Jan 19, 2010 | 1995 GMC Sierra C1500
Jan 03, 2010 | 2002 GMC Sierra C/K1500
58 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: