Question about 2001 Cadillac DeVille

Open Question

Adjust the timing on my 2001 cadillac deville

My engine is knocking due to the timing being off with my camshaft and crankshaft diagnostic machine gave me the codes i would like to know how to access my timing chains so i could line the marks back up or replace the chains if needed.I think its due to the winter blend gas and the temperature in indiana spiking to almost seventy degrees.

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

garyq1970
  • 73 Answers

SOURCE: SETTING TIMING ON 2000 NORTHSTAR ENGINE

Setting the camshaft timing isnecessary whenever the camshaft drive system has been disturbed,meaning the relationship between any chain and sprocket has been lost.Correct timing exists when the crankshaft and intermediate shaftsprocket timing marks are in alignment and all 4 camshaft drive pinsare perpendicular (90 degrees) to the cylinder head surface.

degrees) to the cylinder head surface. 0900c152800a57af.jpg I hope this helps, if not let me know
moz-screenshot.jpg

Posted on Nov 12, 2008

csmock132
  • 4669 Answers

SOURCE: CANNOT STRETCH TIMING CHAIN BACK ONTO CAMSHAFT

You have the tensioner out right? Is the engine still in the car or do you have it out?

Posted on Aug 11, 2010

darrylgoodfe
  • 3 Answers

SOURCE: My knock sensor on my 2003 cadillac deville is faulted. How hard and what tools and supplies do I need to replace the knock sensor

  1. Remove the intake manifold.
  1. Disconnect the knock sensor electrical connector.
  1. Remove the knock sensor (KS).
Installation Procedure

    602292.png
    .
  1. Install the knock sensor.Tighten
    Tighten the knock sensor to 25 [n-m] (18 lb ft).
  2. Connect the knock sensor electrical connector.
  3. Reinstall the intake manifold.
    this is quite a job and i would not reccomend a novice mechanic to preform this repair book time is about two hours for this repair hope this helps

Posted on Oct 20, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the distributor on a 2001 Cadillac deville?


Has no distributor - electronic ignition !
The electronic ignition system does not use the conventional distributor and coil. The ignition system consists of the following components/circuits:
?€¢
Eight ignition coils


?€¢
Eight ignition control (IC) circuits


?€¢
Two ignition control modules (one per cylinder bank)


?€¢
Camshaft position (CMP) sensor


?€¢
Crankshaft position (CKP) sensor A


?€¢
Crankshaft position (CKP) sensor B


?€¢
Related connecting wires


?€¢
Powertrain control module (PCM)

Jul 29, 2015 | Cadillac Cars & Trucks

2 Answers

My truck sonoma gmc 2001 dont past the emission test


Definition of Diagnostic Trouble Code P1345 Audi: Ignition Coil Power Output Stage 3 Short to Ground BMW: Misfire Cylinder 2 with Fuel Cut-Off Buick: Crankshaft Position (CKP)-Camshaft Position (CMP) Correlation Cadillac: Crankshaft Position (CKP)-Camshaft Position (CMP) Correlation Chevrolet: Crankshaft Position (CKP)-Camshaft Position (CMP) Correlation Ford: Cylinder Discrimination Signal (Signal From Camshaft Position Sensor) GMC: Crankshaft Position (CKP)-Camshaft Position (CMP) Correlation Isuzu: Crankshaft Position - Camshaft Position Correlation Kia: No SGC Signal (1.6L) Lexus: Variable Valve Timing / CMP Sensor Range / Performance Lincoln: Cylinder Discrimination Signal (Signal From Camshaft Position Sensor) Mazda: Cylinder Discrimination Signal (from CMP sensor) Mercury: Cylinder Discrimination Signal (Signal From Camshaft Position Sensor) Oldsmobile: Crankshaft Position (CKP)-Camshaft Position (CMP) Correlation Pontiac: Crankshaft Position (CKP)-Camshaft Position (CMP) Correlation Saturn: Crankshaft Position (CKP)-Camshaft Position (CMP) Correlation Toyota: Variable Valve Timing / CMP Sensor Range / Performance Volkswagen: Ignition Coil Power Output Stage 3 Short to Ground

Jul 19, 2015 | GMC Cars & Trucks

2 Answers

I have a 2001 cadilac deville that has a wicked knock in the engine. it is a rod knock (from the sound) so i figure my options are to change the engine, or change the rod ect. I wanna know if the engine...


Thats going to be a tricky pull. you can actually do BOTH methods fro pulling that motor. Which ever is easier for you would be better.

As far as the rod knock. Rod knock simply means that the rod bearing has spun and is no longer a smooth surface. potentially, you could pull the motor and replace just that rod and bearing if the crankshaft was unaffected. the majority of the time, more work needs to be done. I think in this case, it may be cheaper to remove the motor and replace the crank and bearings. A replacement used motor will probably run about 1k if you can find one at a yard.

Apr 07, 2014 | 2001 Cadillac DeVille

2 Answers

05 kia amanti with diagnostics codes p0350,p0320,p0300,p0302,p0303,p0304,p0305,p0306.skipping at times.when it does skip & misfire the rpm gauge goes crazy.this problem is not consitant


Generic OBD II Diagnostic Trouble Codes

DTC CODES P0300 to P0399

P0300....Random/Multiple Cylinder Misfire Detected

P0301....Cylinder 1 Misfire Detected

P0302....Cylinder 2 Misfire Detected

P0303....Cylinder 3 Misfire Detected

P0304....Cylinder 4 Misfire Detected

P0305....Cylinder 5 Misfire Detected

P0306....Cylinder 6 Misfire Detected

P0307....Cylinder 7 Misfire Detected

P0308....Cylinder 8 Misfire Detected

P0309....Cylinder 9 Misfire Detected

P0310....Cylinder 10....Misfire Detected

P0311....Cylinder 11 Misfire Detected

P0312....Cylinder 12 Misfire Detected

P0313....Misfire Detected with Low Fuel

P0314....Single Cylinder Misfire (Cylinder not Specified)

P0320....Ignition/Distributor Engine Speed Input Circuit

P0321....Ignition/Distributor Engine Speed Input Circuit Range/Performance

P0322....Ignition/Distributor Engine Speed Input Circuit No Signal

P0323....Ignition/Distributor Engine Speed Input Circuit Intermittent

P0324....Knock Control System Error

P0325....Knock Sensor 1 Circuit (Bank 1 or Single Sensor)

P0326....Knock Sensor 1 Circuit Range/Performance (Bank 1 or Single Sensor)

P0327....Knock Sensor 1 Circuit Low Input (Bank 1 or Single Sensor)

P0328....Knock Sensor 1 Circuit High Input (Bank 1 or Single Sensor)

P0329....Knock Sensor 1 Circuit Input Intermittent (Bank 1 or Single Sensor)

P0330....Knock Sensor 2 Circuit (Bank 2)

P0331....Knock Sensor 2 Circuit Range/Performance (Bank 2)

P0332....Knock Sensor 2 Circuit Low Input (Bank 2)

P0333....Knock Sensor 2 Circuit High Input (Bank 2)

P0334....Knock Sensor 2 Circuit Input Intermittent (Bank 2)

P0335....Crankshaft Position Sensor A Circuit

P0336....Crankshaft Position Sensor A Circuit Range/Performance

P0337....Crankshaft Position Sensor A Circuit Low Input

P0338....Crankshaft Position Sensor A Circuit High Input

P0339....Crankshaft Position Sensor A Circuit Intermittent

P0340....Camshaft Position Sensor 'A' Circuit (Bank 1 or Single Sensor)

P0341 Camshaft Position Sensor 'A' Circuit Range/Performance (Bank 1 or Single Sensor)

P0342....Camshaft Position Sensor 'A' Circuit Low Input (Bank 1 or Single Sensor)

P0343....Camshaft Position Sensor 'A' Circuit High Input (Bank 1 or Single Sensor)

P0344....Camshaft Position Sensor 'A' Circuit Intermittent (Bank 1 or Single Sensor)

P0345....Camshaft Position Sensor 'A' Circuit (Bank 2)

P0346....Camshaft Position Sensor 'A' Circuit Range/Performance (Bank 2)

P0347....Camshaft Position Sensor 'A' Circuit Low Input (Bank 2)

P0348....Camshaft Position Sensor 'A' Circuit High Input (Bank 2)

P0349....Camshaft Position Sensor 'A' Circuit Intermittent (Bank 2)

P0350....Ignition Coil Primary/Secondary Circuit

Nov 17, 2010 | Kia Amanti Cars & Trucks

1 Answer

Timing mark for 98 cadillac deville trying to put the car back into timing after engine overhaul the engine size is 4.6 thanks


The timing mark on the crankshaft sprocket should be at the 12 O'clock position.....the timing mark on the intermediate sprocket should be at the 6 O'clock position...in other words, the two timing marks are aligned.
The drive pins on the 4 camshafts must be vertical or perpendicular to the cylinder head, ie 90 degrees to the cylinder head surface.

May 20, 2010 | 1998 Cadillac DeVille

1 Answer

My autoScanner is showing a code of P0014, protenting to timing and cam poistion. I have a 2002 Trailblazer.


DTC P0014
Circuit Description
The cam phasing system is a hydraulically actuated phase shifting mechanism. The powertrain control module (PCM) supplies the ignition positive driver and ground circuits. A pulse width modulated (PWM) driver controls the amount that the camshaft actuator solenoid assembly advances or retards the exhaust camshaft. The exhaust camshaft is commanded to a maximum ****** position of 25 degrees. When the exhaust camshaft is retarded at the maximum rate, the duty cycle of the signal is at 100 percent. The maximum advance rate has a 0 percent duty cycle. Other than when the camshaft is at full advance, a 50 percent duty cycle is used to maintain a steady ****** angle.

If the desired and actual cam phase angle error exceeds its tolerance value for a certain amount of time, then DTC P0014 will set.
Condition/Concern:
On rare occasions, a rough idle may be encountered with a P0014 and/or P0017 DTC. Due to the rough idle, a P0106 DTC may be stored too. This concern may be due to debris in the camshaft actuator system, which may be caused by a missing camshaft actuator solenoid screen or a worn crankshaft thrust bearing. Typically, this is the result of a camshaft actuator solenoid concern. If this is due to a worn crankshaft thrust bearing, some customers may also comment on a drive belt noise.

Recommendation/Instructions:
If this concern is encountered, follow the SI diagnostics and repair as necessary. If the SI diagnostics do not isolate the cause of this concern, ensure that camshaft actuator solenoid screens 1, 2, and 3 are in place.

(1) Screen for Advance Pressure to Camshaft Actuator
(2) Screen for Pressurized Oil from Oil Pump
(3) Screen for ****** Pressure to Camshaft Actuator

If any of these screens are missing, replace the camshaft actuator solenoid, change the engine oil and filter, and evaluate the concern.

If all these screens are present, measure the crankshaft end play to determine if it is within the specification of 0.0044" - 0.0153" (0.112 - 0.388 mm). Typically, if excessive crankshaft end play is causing this concern, it will be obviously out of specification by .050" or more. If crankshaft end play is within specification, replace the camshaft actuator solenoid.

If the crankshaft end play is obviously out of specification, inspect the engine block for damage due to contact with the crankshaft.

If there is no engine block damage present, disassemble the engine and inspect the following components for damage due to thrust bearing debris in the engine oil: all bearings, all journals, all valvetrain components, all timing components, and the crankshaft

Thank you for using Fixya

Mar 18, 2010 | 2002 Chevrolet TrailBlazer

1 Answer

Where are the camshaft and crankshaft position


crankshaft sensor is and the hormonic balance pulley and cam sesoor should b and the front of the motor toward the top. But to b sure u should get a book for u vehical

Mar 09, 2010 | 2001 Cadillac DeVille

2 Answers

2001 cadillac deville


check diagnostic codes.could possibly be crankshaft and camshaft position sensor

May 07, 2009 | 2001 Cadillac DeVille

1 Answer

SETTING TIMING ON 2000 NORTHSTAR ENGINE


Setting the camshaft timing isnecessary whenever the camshaft drive system has been disturbed,meaning the relationship between any chain and sprocket has been lost.Correct timing exists when the crankshaft and intermediate shaftsprocket timing marks are in alignment and all 4 camshaft drive pinsare perpendicular (90 degrees) to the cylinder head surface.

degrees) to the cylinder head surface. 0900c152800a57af.jpg I hope this helps, if not let me know
moz-screenshot.jpg

Nov 12, 2008 | 2000 Cadillac DeVille

Not finding what you are looking for?
2001 Cadillac DeVille Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7689 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...