Question about 2005 Mercury Mountaineer

Open Question

How do i properly burp the air out of the cooling system from a '05 mercury mountaineer 4.0 liter?

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 5495 Answers

SOURCE: egr problem

Check the passages under the airhorn. When carbon builds up the diagnostic blames the EGR for not opening and throws a code. Actually there is no flow to the EGR because the port is clogged and the diagnostic measures the flow after the EGR.

They really needed to have a sensor before and after the EGR. Also remember to disconnect the battery for 10 minutes to remove old info.

Posted on Sep 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I burp my heater coil


How to Burp your car's cooling system - Instructables

www.instructables.com/id/How-to-Burp-your-cars-cooling-system/ This instructable will walk you through the simple process of "burping" or getting all of the trapped air out of your cars cooling system. ... Despite all the complaints about DexCool coolant, I have never had an issue. ... in that way, my cars are as reliable as possible regarding cooling ...

Burping The Cooling System "How To" - YouTube

2q==? 4:04 https://www.youtube.com/watch?v=BQk9HpuIrmA Aug 26, 2012 - Uploaded by Nthefastlane How To Use A Spill Free Funnel to burp your radiator. Lisle 24610 Spill-Free Funnel cost $24 shipped on ... gif;base64,r0lgodlhaqabaaaaach5baekaaealaaaaaabaaeaaaictaeaow==gif;base64,r0lgodlhaqabaaaaach5baekaaealaaaaaabaaeaaaictaeaow==gif;base64,r0lgodlhaqabaaaaach5baekaaealaaaaaabaaeaaaictaeaow==gif;base64,r0lgodlhaqabaaaaach5baekaaealaaaaaabaaeaaaictaeaow==gif;base64,r0lgodlhaqabaaaaach5baekaaealaaaaaabaaeaaaictaeaow==gif;base64,r0lgodlhaqabaaaaach5baekaaealaaaaaabaaeaaaictaeaow==

Clearing the Cooling System of Air. 'Burping' the Radiator ...

z? 2:49 https://www.youtube.com/watch?v=cRPEqO06O58 Aug 13, 2012 - Uploaded by JerryRigEverything Let me know if that link doesn't work. Anytime you change the radiator, change the thermostat, drain your ...

Engine Running Hot? Burp It! ' MILEPOSTS Garage (Tech ...

automotivemileposts.com/garage/v2n15.html Jun 19, 2004 - Burping the air restores cooling efficiency. ... in direct contact with the radiator surfaces as it goes through the radiator to dissipate that heat.

Removing Trapped Air from Cooling System - www ...

www.supras.com > SUPRAS.com > Tech Center This procedure is commonly known as "burping" the coolant system. ... Ideally, air in the cooling system will be trapped in the radiator top, but because of how ...

"Burping" air from radiator ' The H.A.M.B. - The Jalopy Journal

www.jalopyjournal.com > ... > The Hokey Message Board Mar 30, 2013 - 30 posts - ‎20 authors Removed the radiator cap, started the engine, and watched the engine self-burp itself. You will see and hear it happen, if there was an air ...

How to Burp a Vehicle's Coolant System ' DoItYourself.com

www.doityourself.com/stry/how-to-burp-a-vehicles-coolant-system In situations where your radiator is working normally, "burping" the cooling system may be the only way to get the coolant to do its job. Here are three steps that ...

How to Burp Your Car's Cooling System ' eHow

www.ehow.com > Cars Loosen the radiator or coolant pressure cap and wait for the pressure to escape ... Removing the air from your engine's cooling system, or "burping," is crucial ...

What's best way to "burp" cooling system - Rennlist Discussion Forums

rennlist.com/.../526639-what-s-best-way-to-burp-cooling-system.html Sep 28, 2009 - What's best way to "burp" cooling system 928 Forum. ... the system come up to temperature and 'burping' the upper and lower radiator hoses.

How to Bleed a Radiator: A DIY Guide - CarsDirect

www.carsdirect.com > Car Repair > Brake Repair In maintaining your cooling system, you can both bleed a radiator of excess air, ... In order to burp the system that cap must be off the radiator while running to ...

Feb 07, 2016 | Cars & Trucks

1 Answer

New thermostat, new radiator, system flush, still not much heat??


You need to 'burp' the system to get air locks out.

  • Burping The Cooling System "How To" - YouTube www.youtube.com/watch?v=BQk9HpuIrmA
    • BY NTHEFASTLANE
    • 4 MIN
    • 199K VIEWS
    • ADDED 2012-08-26
    Video embedded · Buy the items featured in this video! Click here: https://rdy.cr/08fb93 How To Use A Spill Free Funnel to burp your radiator Lisle 24610 Spill-Free Funnel ...
  • How to Burp your car's cooling system - Instructables www.instructables.com/id/How-to-Burp-your-cars-cooling-system Video embedded · Intro: How to Burp your car's cooling system. This instructable will walk you through the simple process of "burping" or getting all of the trapped air out of ...
  • Clearing the Cooling System of Air. 'Burping' the Radiator ... www.youtube.com/watch?v=cRPEqO06O58
    • BY JERRYRIGEVERYTHING
    • 3 MIN
    • 232K VIEWS
    • ADDED 2012-08-13
    Video embedded · Clearing the Cooling System of Air. ... Burping The Cooling System "How To" - Duration: ... How To Bleed The Air Out Of A Cooling System ...
  • Related searches for burping coolant system
  • How to Burp Your Car's Cooling System ' eHow www.ehow.com > Cars > Auto Repair > Do It Yourself Auto Repair How to Burp Your Car's Cooling System. Clearing air from your car's coolant system is a fairly easy task. You need a floor jack, a set of jack stands, a helper and ...


  • Jan 27, 2016 | Cars & Trucks

    1 Answer

    Will an air pocket in the coolant system cause it to overheat or over pressurize on a 2001 Nissan Sentra ?


    1. The radiator cap if working correctly it will release pressure in the system provided the cap you have is the correct pressure setting. If you are having a problem with pressure then replace the cap with a new radiator cap with the correct pressure setting. Do not use a cap with a pressure setting other than the original equipment pressure spec. So you do not go to the parts store and buy any radiator cap on the shelf that fits because they come with different pressure ratings and some of these will be totally unsuitable for your car.

    2. If the pressure valve is stuck in the "old" cap the pressure release system will not work.

    3. Overheating
    Air pockets in the cooling system can definitely cause overheating and can retard coolant flow through the system. If you are draining the radiator to replace the coolant or replacing the radiator you need to follow the correct procedures for bleeding air out of the system for that particular engine after coolant refilling. Some engines have bleeder screws on the cooling system to assist in the air bleeding procedure and some don't.

    There are various causes for overheating so don't assume it will necessarily be solved by bleeding any remaining air from the cooling system and replacing the radiator cap with one that works.

    Other causes can be...........
    1. Faulty cooling system thermostat. (Replace the Thermostat)
    2. Faulty water pump, especially if the impellers have corroded away or have disintegrated in the case of those design genius water pumps with plastic impellers. (Replace the water pump)

    3. Cooling fans not working and if so the cause needs to be tracked. Check that your fans are kicking in. If the engine is overheating the fans should be running because they will switch on when the coolant reaches a specific temp and well before the coolant gets excessively hot.

    4. A partial blockage in the coolant passages inside the engine but not in the radiator if you have a new one. If the coolant is not changed at the required intervals(frequently the case with many owners) or is over diluted with water you can get a build up of debris. If products like stop leak have been used in the system this can create similar problems with partial blockages inside the engine coolant passages.

    5. A compression leak into the cooling system.
    If you have bled air from the system and have continuous air bubbles in the cooling system I would suspect a compression leak. In that event a basic leak down test will show if you have compression gasses leaking into the cooling system and from which cylinder(s). The spark plug is removed and compressed air is forced into the cylinder via the spark plug fitting and air bubbles will show up in the coolant of there is a leak into the cooling system.
    --------------------------------
    Have the problem with overheating addressed immediately. Running the engine with an overheat condition will cause expensive engine damage many times the cost of fixing the overheating issue.

    ------------------------------------------------------------------------------

    Dec 29, 2015 | Nissan Cars & Trucks

    1 Answer

    How do I burp the coo long system in a Mercury grand marquis


    Answer borrowed from BigNslow
    Determine the capacity of the cooling system, then properly refill the system at the recovery tank or radiator opening with a 50/50 mixture of fresh coolant and distilled water until it reaches the FULL COLD line on the recovery tank or the radiator is full.

    Leave the recovery tank or radiator cap off to aid in bleeding the system.

    Start the engine and allow it to idle until the thermostat opens (the upper radiator hose will become hot). The coolant level should go down, this is normal as the system bleeds the air pockets out of the system.

    Refill the system with coolant to the proper level.

    Turn the engine OFF and check for leaks.

    Mar 07, 2015 | 2002 Mercury Grand Marquis

    1 Answer

    How do I burp the cooling system in a Mercury grand marquis


    Answer borrowed from BigNslow:
    Determine the capacity of the cooling system, then properly refill the system at the recovery tank or radiator opening with a 50/50 mixture of fresh coolant and distilled water until it reaches the FULL COLD line on the recovery tank or the radiator is full.

    Leave the recovery tank or radiator cap off to aid in bleeding the system.

    Start the engine and allow it to idle until the thermostat opens (the upper radiator hose will become hot). The coolant level should go down, this is normal as the system bleeds the air pockets out of the system.

    Refill the system with coolant to the proper level.

    Turn the engine OFF and check for leaks.

    Mar 07, 2015 | Mercury Grand Marquis Cars & Trucks

    1 Answer

    Spark plug wire dipgram


    2000 Mercury Mountaineer 4.0 liter V-6 SOHC VIN "E" and 4.0 liter SOHC V-6 VIN "X" and 4.0 liter SOHC V-6 VIN "K"

    Firing Order: 1-4-2-5-3-6


    2000 Mercury Mountaineer 5.0 liter SOHC V-8 VIN "P"

    Firing Order: 1-3-7-2-6-5-4-8


    Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

    Thank you for using Fixya, and have a nice day.

    Nov 02, 2011 | 2000 Mercury Mountaineer

    1 Answer

    Heater wont get hot when idleling only hen driving


    you have air trapped n the cooling system. Need to burp it out and add coolant.

    Oct 20, 2011 | 2003 Mercury Mountaineer

    1 Answer

    Replaced intake manifold. Now cannot get water/coolant into the radiator. How?


    Rasie front of car on hill and jack stands. This will help purge air trapped in system. Leave radiator cap loose, cold engine. Run engine until upper hose is hot and burps air. Shut down, as it cools keep the radiator and reservoir full. Tighten cap and it should **** from reservoir as it cools.

    Jun 21, 2011 | 1995 Mercury Grand Marquis

    1 Answer

    My 1999 mercury villager heater is not blowing hot air


    you have air trapped in the heater cores, front and back. You need to burp system or take to a shop and have them flush cooling system and use their vacuum system to purge the air. Should cost $60. Make sure they have vacuum system.

    Or go to our site and read file on how to burp air from cooling system.

    http://groups.yahoo.com/group/villagerquest/

    Dec 30, 2009 | 1999 Mercury Villager

    Not finding what you are looking for?
    2005 Mercury Mountaineer Logo

    Related Topics:

    23 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Mercury Experts

    yadayada
    yadayada

    Level 3 Expert

    75807 Answers

    fordexpert

    Level 3 Expert

    5495 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22133 Answers

    Are you a Mercury Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...