Question about 2001 Chevrolet Malibu
Do you mean disconnect the switch, or just remove it from the column ? ?
Posted on Dec 06, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 97 chevy truck stop light switch
make sure you have the right fuse for the box in sometimes they just stick one in ... check your ground .. and dont use your fingers to put the bulb in .. the oil from your fingers gives it a shorter life...
Posted on Jul 31, 2009
The problem may be the steering wheel lock. The solution is to relieve the pressure on the mechanism. My Blazer does this all the time.
The front wheels are probably turn slightly in one direction or the other. Whichever direction, try turning the steering a bit more in that same direction then try the key. It won't take much to free it.
Posted on Aug 10, 2009
SOURCE: ignition switch
there will be 4 screws that hold that part together or you might only have 2 but any ways then you will have to use a flat head screw driver to pry it apart from there you will have to un screw the swicth but be carefull not to pull the wires out then just take it about and put the new one in there should be instructions on the or in the new one
Posted on Sep 21, 2009
need a special tool to remove the locking plate behind steering wheel then pull turn signal switch back a little then remove screw that keeps lock cylinder in place
Posted on Oct 22, 2009
remove the shroud around the steering lock ,then with a meter locate the feed ,then the 12v when ignition turned on then with a suitable paperclip or piece of wire turn the igniition on and then from the 12v supply apply a supply the other connection for the starter motor and try that ,if it starts ok then renew the ignition switch ,if it doesnt start its the electronics
Posted on Dec 27, 2009
Tips for a great answer:
Feb 06, 2012 | Cars & Trucks
Jun 21, 2010 | 1997 Chevrolet C1500
Apr 28, 2010 | 1997 Chevrolet Cavalier
Apr 05, 2010 | 1997 Chevrolet C1500
Feb 07, 2010 | 1997 Chevrolet Blazer
Jan 02, 2010 | 1997 Chevrolet Blazer
Sep 09, 2009 | 1997 Chevrolet Astro
Jun 13, 2008 | 1995 Chevrolet Blazer
23 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: