Question about 1991 Toyota 4Runner
Cannot find any leaks around the pump
IT CAN BE ISSUE WITH HOSES TOO. GET THE PRESSURE TEST CONDUCTED FOR POWER STEERING PUMP. IT WILL TELL YOU WHERE THE PRESSURE IS GETTING RELEASED SO YOU CAN CONCENTRATE ON THAT AREA. POWER STEERING TROUBLESHOOTING PROBLEMS --------- These will help. Thanks.
---------In relation to these problem there are few solved help links,i suggest you to go through link mentioned below.
and click the link:-----
POWER STEERING TROUBLESHOOTING PROBLEMS
These will help.
Posted on Dec 06, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1992 toyota camry tight steering
if only loosened belt then you should be hearing those squeecking noise. if there are leaks at the end of racks then it should not be a heavy steering too. its a good chance its your pump.
Posted on May 31, 2008
The best bet is its trans oil. The gearbox has crushable washers/gaskets, the bolts may just need to be tightened slightly to crush the gasket and seal.
Posted on Jul 12, 2008
it sounds like tour power steering rack and pinion may be leaking this is what you call the actuator rod.
Posted on Feb 04, 2009
You probably do have a power steering leak. Check the fluid again, it's most likely low if you are having an increasing problem with it. As the fluid is drained slowly through the leak it allows air bubbles to enter the system and cause it to become sluggish or sticky. Get the leak fixed asap so you don't spend a huge amount on fluid and keep an eye on the fluid level.
Posted on Mar 01, 2009
"The leak" is probably not the pump. A closer inspect might reveal a bad hose, hose fitting or worse yet the "rack" has a bad seal. Who ever diagnosed the leak did not look close enough to verify the source of the leak. The washer story sounds suspect too.
I would take a small inspection mirror ( 1" or so in diameter), and look with a focused flahlite on exactly the drips of power sterring fluid are cming from. Some reputabile shops have a UV dye and use a black light to trace,,, but a good sarp eye and searching will spot the source leak.
Then you need to take the hose or part to the NAPA , or your choice parts store and save the money a shop or dealer would charge...
good luck jerzil
Posted on Mar 29, 2009
Tips for a great answer:
Oct 17, 2015 | Cars & Trucks
Nov 12, 2012 | 1994 GMC Safari
Nov 03, 2011 | 1994 Nissan Altima
Aug 27, 2011 | 1994 Oldsmobile Cutlass Ciera
Jul 30, 2011 | 2004 Hyundai Santa Fe
Jul 13, 2011 | 2002 Volkswagen Golf
Mar 13, 2011 | 1999 Chevrolet Malibu
Mar 11, 2010 | 1989 Chevrolet Beretta
Sep 29, 2009 | 1999 Toyota 4Runner
Aug 26, 2009 | 1996 Pontiac Grand Am
228 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: