Question about 2004 Toyota Sequoia

Open Question

Interior lights do not come on automatically

We bought a used 2004 Toyota Sequoia. When the front doors open, the interior lights do not come on auutomatically. They work when switched on, but we can't find a way to have them come on automatically when the door opens. Did that year/model have that feature?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1861 Answers

SOURCE: 1997 Toyota corolla - warning noise when lights left on - not working on drivers side!

The ground circuit for the driver side door switch is compromised, or the door switch is bad. Try this: Remove the black rubber cover from the door swich. Using a 10 millimeter wrench or socket, loosen & tighten the switch retention bolt. See if the dome light flickers. If so, the ground on the switch is bad, & just needs cleaned up. If not, remove the switch, and touch the wire behind the switch to the body,or the bolt hole. If the dome light lights, you need a door switch. Your problem is entirely in the door switch/ground/wiring. Hope this helps, and thanks for choosing FixYa.

Posted on Oct 28, 2008

bad_dog1
  • 104 Answers

SOURCE: 2004 Tacoma Quad Cab, Personal light and interior

Some other ares to check should include you room light switch, door courtesy switch, the wiring harness, or it could possibly be you body ecu.

Posted on Mar 15, 2009

  • 333 Answers

SOURCE: My 2004 Toyota Sequoia rear door will not open -

Dig out the broken bits of door handle, then on the right side insert a flat head screwdriver diagonally up and fish around for the release lever.
Push up on the screwdriver handle to manipulate the release lever down and your tailgate will open.
Remove the interior panels by unbolting the 10mm bolt behind the strap and pulling off the interior pieces held on by plastic pop fasteners.
Remove the 10mm bolts around the perimeter of the interior cover plate and let it hang by the harness.
Remove the license plate.
Remove the license plate trim panel (multiple push fasteners from behind and a few 10mm around the lock)
Replace the handle.

Posted on Sep 13, 2009

  • 1 Answer

SOURCE: toyota sienna interior lights not working

The problem is in the sunvisor light. You will have to take the light assembly off and you will find wires have become disconnected.

Daviscacare.com
757-689-4701

Posted on Jan 29, 2010

  • 4336 Answers

SOURCE: how to program garage door opener on 2004 toyota

You may find that this porcess is with your GARAGE DOOR opener and not the car. Rolling code technology units require that you press a button on your opener motor, (get a ladder and a light, get up there and read it, have an assistant in the car to press). what you do is press the button on the opener, to accept input signals, then you press the button in the car. Usually you get a flash on the opener's lights, then that sender (car) is accepted.

Posted on Jul 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My interior lights won't go off. There is not a door open or a light on.


check your light dimmer and urn it back just a bit, you have accidently turned you interior lights on.

Jan 20, 2015 | 2004 Lincoln Aviator

1 Answer

2002 Sequoia automatic locks/auto lock buttons no longer work - all doors affected


You possibly need to reprogram the lock system to match your fobs.
If it unlocks by the interior switches then its the fob programming. This site is one example you can look for. http://www.chadspictures.com/automotive/How-To-Program-Toyota-Key-Fob/ If this is not the issue the computer that does the door locks could have died or you can look for the door lock fuse or a cut or pinched wire (due to other damage in an accident or from prior mods you did). Other possibilities include intermittent door solenoids if you can use the interior switch you can click it open and closed until you find the one that does not work every time. Change it out as it can leave your vehicle unlocked or it might interrupt the system. worst case it could be the chassis computer this site sells some http://www.automotix.net/usedautoparts/2008-toyota-sequoia-chassis_computer-product-i88489256n.html?gclid=CKfowo60gb8CFQQOaQodGqUArQ . If the shift lock system is screwed up it could be casing issues also but that's a long shot.

Mar 29, 2014 | 2005 Toyota Sequoia SR5

1 Answer

04 Toyota Sequoia interior drivers side fuse panel noise.


If the battery is getting old, the clicking could be an indication that it is due for replacement.

Jan 18, 2014 | 2004 Toyota Sequoia

1 Answer

1996 jeep grand cherokee no automatic interior lights


1. If you have the light switch in the wrong mode the lights will not operate when you open the door.

2. If the interior lights do not operate at all (ie you cannot switch them on and off manually)then you need to check the fuse for the interior lights.

3. When set to the correct mode, the interior lights will operate from a door operated switch so if the switch has failed the lights will either stay on or not operate at all when you open and close the door. Eventually these door switches fail with repeated use and need to be replaced. (Consider how many times the small door switch has been operated since 1996).

Dec 25, 2012 | 1996 Jeep Grand Cherokee

2 Answers

2004 toyota sienna manual sliding door problem. When opened all doors will lock shortly after. On same door, interior light will not come on when sliding dooe opened


I have the same problem. I thought it was an electrical problem. My interior lights would go one and off and I would hear clicking noises. I took it to a mechanic and he said my switches for the sliding doors are bad so he had to order them from toyota and I'm getting them replaced tomorrow. Take it to a mechanic and get the switches replaced.

Jan 18, 2011 | Toyota Sienna Cars & Trucks

2 Answers

Just bought a used 2004 Excursion and the interior lights stay on until the battery wears down. would that be a bad roller switch for interior lights and dash lights?


Well, the lights on our 1998 Ford Taurus stay on for a 'limited' amount of time, say 20 minutes and automatically turn off, even if the door is left open or if the glove box light is left on due to a door left open.

I wonder if your body control computer is faulty in your 2004 Excursion?
Or, if the body control computer is fine, and it doesn't have this feature, then I would see if the door latch switch needs to have wd-40 sprayed on it.

We have a 1999 Ford Expeditioin that had this problem with the door open light going on when the door was actually closed. The tech sprayed wd-40 on the locking mechanism and the problem went away.

Aug 08, 2010 | Ford Excursion Cars & Trucks

1 Answer

Cannot open my back door the handle is loose in my toyota sequoia


you have to remove back interior panel be carefull not to crack it. to gain acess to back side of handle..

Dec 08, 2009 | 2002 Toyota Sequoia

1 Answer

How do you get the tailgate latch of a 2006 Toyota Sequoia opened when the latch is broke?


you need to remove the back door interior panel and open the door by the latch itself

Oct 28, 2009 | 2003 Toyota Sequoia

1 Answer

My 2004 Toyota Sequoia rear door will not open - the handle is broken. How do I get into the door, whith it closed, to make the necessary repairs?


Dig out the broken bits of door handle, then on the right side insert a flat head screwdriver diagonally up and fish around for the release lever.
Push up on the screwdriver handle to manipulate the release lever down and your tailgate will open.
Remove the interior panels by unbolting the 10mm bolt behind the strap and pulling off the interior pieces held on by plastic pop fasteners.
Remove the 10mm bolts around the perimeter of the interior cover plate and let it hang by the harness.
Remove the license plate.
Remove the license plate trim panel (multiple push fasteners from behind and a few 10mm around the lock)
Replace the handle.

Sep 13, 2009 | 2004 Toyota Sequoia

Not finding what you are looking for?
2004 Toyota Sequoia Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...