Question about Hyundai Trajet

Open Question

Trajet, cannot change the coolant

Cannot see the radiator cap. Only the exspansion bottle cap

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

stormbrewin
  • 426 Answers

SOURCE: Coolant filling up overflow bottle

You may need to ask AAA to put a radiator pressure tester on the resevoir bottle and pump it up to operating pressure(Pressure cap rating) and see if it over pressurises while it is running at operating temp,rev engine up and down and watch what the testers pressure readings do,it should move up and down in sync with the water pump.If the pressure keeps building i would have to believe that combustion chamber gases are over pressurising your cooling system.Also test the pressure cap is functioning within factory specs.

Posted on Oct 30, 2008

  • 8 Answers

SOURCE: Where is the radiator cap on 2001 Olds Alero?

if you dont see a radiator cap then the cap for your resevoir tank also serves as your radiator cap, thats where you would put your radiator cleaner and dex-cool in at. it is pressurized just like a normally radiator is with a normal radiator cap on it so dont open it when its hot! the resevoir cap should also have dex-cool stamped on it

Posted on Nov 22, 2008

emissionwiz
  • 75814 Answers

SOURCE: 1996 ford escourt overheating. changed waterpump

You have combustion gases getting into the cooling system, that much is sure, if u didn't have the headed for poss warp-age then a new head gasket will leak, these heads warp really bad, we always have them trued up or we won't guarantee the job.

Posted on Feb 22, 2009

  • 139 Answers

SOURCE: 2003 kia sorento coolant change

you shoud not have to change it.this wouldbe long life
antifreeze have the PH check at a shop

Posted on Apr 09, 2009

CGYaprentice
  • 58 Answers

SOURCE: dash says engine coolant hot

Did you change you ECT (ENGINE COOLANT TEMPERATURE SCENSOR) ?

Posted on May 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

3 months ago i changed to a new radiator after going trough water bottle after water bottle.Things were fine.Now im over heating again with the problem being the pressure cap of the water bottle apparently...


There is no water bottle

All vehicles have a coolant recovery container

When the vehicle warms up ,some coolant goes
past the radiator cap into it

At night when cool, the radiator draws back what
it needs

Been that way for 50 years

That container isn't under pressure as you can see

You have to diagnose the engine overheating issue

You have a new radiator,I would assume new thermostat
& rad cap,so continue on

It is very old, so a head gasket wouldn't be a supprise

Aug 02, 2011 | 1990 Jeep Cherokee Limited

1 Answer

Need to change coolant recovery tank can a anyone do it


Yes you can do it yourself

Degas Bottle Removal
  1. Drain radiator (8005) until engine coolant is out of degas bottle. Disconnect radiator overflow hose (8075) and engine coolant vent hose at degas bottle.
  1. Remove power steering oil reservoir retaining screws and position power steering oil reservoir (3A697) out of the way.
  1. Remove degas bottle return hose and clamp. Remove degas bottle retainers and remove degas bottle.
Installation
  1. Position degas bottle in vehicle and install retaining screw and nut. Tighten retaining bolt and nut to 9-12 Nm (80-106 lb-in).
  1. Connect degas bottle hose and clamp to degas bottle.
  1. Position power steering oil reservoir onto degas bottle and install retaining screws securely.
  1. Connect radiator overflow hose and engine coolant vent hose to degas bottle.
  1. Fill and bleed engine cooling system as described. Check for coolant leaks and proper engine coolant level after engine reaches normal operating temperature.


    q3699b.gif


    Item Part Number Description 1 8100 Radiator Cap 2 - Nut (1 Req'd) 3 - Bolt and Retainer (1 Req'd) 4 - Nut (1 Req'd) 5 - Bolt (1 Req'd) 6 - Coolant Recovery Hose 7 - Coolant Return Hose 8 - Coolant Recovery Hose 9 8A808 Degas Bottle A - Tighten to 9-12 Nm (80-106 Lb-In)
Hope this helps.

Zeppelinx12

Mar 08, 2011 | 1999 Ford Taurus

2 Answers

Heat is not working - coolant was low so filled it.... problem here... heard something about an air pocket


If you dont have an external coolant leak anywhere under your hood that has shown up on your driveway it could be the intake manifold or the headgasket leaking. Also check the thermostate to solve the heat issue.

Jan 05, 2011 | 1998 Pontiac Bonneville

2 Answers

Engine is overheating and I need to put coolant in, what coolant do I use and where to I put it?


A 91 should have regular green coolant. Make sure to read the label on the bottle. Sometimes it is premixed and some times you need to mix it yourself. If you have to mix it your self you will use 1/2 coolant and 1/2 water.

You can add it directly into the radiator through the radiator cap. Make sure the engine is cold before you remove the radiator cap!. Once the radiator is full you can top off the overflow container. It should be on the passenger side of the car near the battery. It will be the white bottle with a black hose going into it.

Do not mistake this with the washer bottle. The washer bottle will have the blue cap.

Oct 01, 2010 | 1991 Honda Accord

1 Answer

93 lincoln mark v111 antifreeze radiator, how do i bleed air out of rad, coolant from coolant bottle into radiator?


When you top off the radiator you fill it to the neck where the cap goes. When the engine heats up the antifreeze eventually will distribute and the excess will go into the overflow bottle.

After the car cools, it will draw the antifreeze from the overflow tank into the radiator. Then check the level line on the overflow bottle(tank) for the normal amount of antifreeze per marks on the bottle.

You should have your radiator cap checked for its pressure rating. Use the type of cap which allows for an overflow system. The older caps would not let the antifreeze flow both ways.

Mar 26, 2010 | 1998 Lincoln Mark VIII

1 Answer

Radiator and reservoir are empty after water pump change.


fill the raditor to the top only when cold, top off the coolant bottle level to full cold, reinspect the coolant bottle after the engine get to proper operation temputure and add coolant to the bottle only. NEVER take off the radiator cap when hot!

Nov 05, 2009 | 1996 Chevrolet Camaro

2 Answers

Change hose radiator


your radiator is probably bad small leak but itll do its deal of leak...

Jul 10, 2009 | 1997 Infiniti.5 J30

1 Answer

1999 astrovan heat system


check your engine coolant, sounds like it is low.

With the vehicle off and engine cold, take the radiator cap off. If the water level isnt at the top of the radiator neck and/or the adjacent plastic bottle doesn't have any coolant in it...

With the radiator cap off, start the engine and let it warm up. Completely fill the radiator to the top of the radiator neck and fill the plastic bottle to the "fill line" inscribed on the bottle...both with a 50% water, 50% coolant solution.

install the radiator cap and after a minute or so check your heat in the passenger cabin...hope it works well now.

Dec 23, 2008 | 1999 Chevrolet Astro

1 Answer

Coolant filling up overflow bottle and not returning Started intermittently No coolant leaks Changed Hoses Cap Thermostat Cooling system has always had good quality coolant and is clean inside...


You may need to ask AAA to put a radiator pressure tester on the resevoir bottle and pump it up to operating pressure(Pressure cap rating) and see if it over pressurises while it is running at operating temp,rev engine up and down and watch what the testers pressure readings do,it should move up and down in sync with the water pump.If the pressure keeps building i would have to believe that combustion chamber gases are over pressurising your cooling system.Also test the pressure cap is functioning within factory specs.

Oct 30, 2008 | Mitsubishi Passenger Cars & Trucks

1 Answer

1999 dodge caravan coolant bottle/ hoses


is it on the coolant bottle or the radiator?

on your post . you said radiator but on the thread topic, you pick coolant bottle.

anyway, if its the radiator, there are two big hose connected, one at the top and one at the bottom . then tehre is another small hose that is usually at the top where you put the radiator cap and this is the one going to the coolant bottle.

if your talking about the coolant bottle, there is one hose connected to the top where you put the radiator cap and the other one on the cover as an overflow hose.

it could be just open or another hose connected to it just to direct the water downwards. but it is not connected to anything.

i hope i answer your inquiry.

tnx 4 using fixya,

drcool

Aug 11, 2008 | 1999 Dodge Caravan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...