Question about Peugeot 405

Open Question

Sump drain plug torque on peugot 206 hdi 2004

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

djicenova
  • 319 Answers

SOURCE: oil sump drain plug

most likely a 17MM

Posted on Feb 27, 2009

ginko
  • 19396 Answers

SOURCE: i have a peugoet 206 1400cc hdi its really

Replace spark plugs, air and fuel filter. That is ordinary mainteinance.
Ensure that you have spark on 4 cylinders.
Go to a garage and have car ECU (computer) scanned to retrieve error codes. That will tell you where problem can be.
Have vacuum system and fuel pump tested. This is done using a gauge tool.
Have compression tested.
Check O2 sensor, if the problem is particularly bad when engine is cold , also check AIT and MAF sensor.

Posted on Sep 21, 2009

  • 5 Answers

SOURCE: i have a peugeot 206 1.4 hdi 2004 getig no fule to

You can check the pump anyway, turn the key in ignition so dash lights come on, you should hear the pump come on for a few seconds. This sounds silly but have you also checked the fuse, also have you had the fuel filter changed? I am guessing there is fuel in the tank??...lol.

Posted on Oct 17, 2009

  • 1 Answer

SOURCE: Electronic immobiliser warning light on engine will not start on Peugot 406 HDI 90

In my case,i have to enter the code on the pad each time i attempt to start the ignition. What can i do about this as it can be very annoying

Posted on Dec 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the torque wrench setting for a 206 1.4 hdi rear wheel baering


Assume you mean Peugeot 206 hdi?

Rear hub nut is 200 Nm.

Mar 25, 2016 | Cars & Trucks

1 Answer

Peugeot 206 problems


  • Yes, possibly the water got up around ignition parts or electrical connections that are giving you problems. Have the engine computer scanned for diagnostic trouble codes. If the engine light was on, it should have set a code.

Dec 23, 2013 | Cars & Trucks

1 Answer

Need to know what the setting is for head gasket on a peugeot 206 sw 1.4 hdi car


Best get the details from a dealer or reputable mechanic as some engines are set to a torque setting while others are set to a turn angle requiring an angle gauge on the bolts

Feb 07, 2013 | Cars & Trucks

1 Answer

Hi, i have a x reg peugeot 206 hdi, the serpentine belt snapped, i have a new 1 but cannot find a diagram on how to fit it. please help.....i need my car!!


Peugeot 206 1.4 HDi - DV4TD (8HZ) 2004 ...

1. The serpentine belt routing diagram - without A/C (Air Conditioning)

tdisline_888.jpg


2. The serpentine belt routing diagram - with A/C (Air Conditioning)

tdisline_889.jpg

Sep 18, 2011 | Peugeot 405 Cars & Trucks

1 Answer

Need an english manual for Peugot 206 sw hdi 2l diesel


have one but i cannot upload a PDF document ,have a look on a few torrent sites like the pirate bay and see what you can find,

Mar 01, 2011 | Peugeot 604 Cars & Trucks

2 Answers

PEUGEOT 206 HDI STARTING PROBLEM


your ecu monitor.. emissions control unit mod is done! i dont think this is a cheap fix. either wait for warmer weather,, sell the car or find a dealer to fix this diesel puppy...word of advice .. dont buy peugeot in this country .. or any country...joke.!!

Feb 26, 2010 | 1989 Peugeot 405

1 Answer

I have a Peugot 206 1.4 sport the engine diagnostic light keeps coming on the engine seems fine> Can I continue to drive the car. Small garages cannot get into the Peugot computer to diagnose the...


Turn the ignition on. Whats the status of service miles? If service miles are reached zero then the diagnostic light comes up to remind you to bring your car to service station. If needed check my other posts to find out the procedure to set off the service /diagnostic light.
Check that the motor oil and oil filter are changed at regular intervals.
For 206 1.4 sports ecu can be scanned by many garages, costs around 45 quids.

Jan 05, 2010 | 1987 Peugeot Liberte

1 Answer

Can someone confirm the location of the Oil Sump Plug (to drain the oil) on a Mercedes CLK 320, 2004. Is it the flat round plug with a torque drive located on the bottom of the black flat box (looks like a...


Crawl under the car and remove the front and rear splash covers under the engine. The forward panel is held by 6 studs (2 shared with the rear panel) and this has to come off first. The rear panel is held by another 4 studs, and the sump drain plug is concealed by this panel.

Jan 02, 2010 | Mercedes-Benz CLK Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Wahs Team

Level 2 Expert

205 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...