Question about Ford Escape

Open Question

Where or how do i reset change oil light on 2012 ford escape?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
johnny5846
  • 379 Answers

SOURCE: 2008 Ford Escape oil change message

to reset the oil monitoring system to 100% , press SET control to access the system check functions , press and release the SET control to display OIL CHNG XXX% HOLD SET NEW , press and hold the SET control for 2 seconds to display OIL CHANGE SET TO 100% , oil life is now reset . thank you !

Posted on Dec 30, 2008

Ad
  • 29 Answers

SOURCE: check engine light reset for 2001 ford escape

On any car 1996 or newer after a repair is made the memory in the computer has to be cleared the light will not go away by itself. The proper way to clear this is with a scanner or code reader but if you dont have any other way unhooking the battery will force the computer to loose all its memory and start all over and the light will go away. If the light returns after a few days you still have a problim.

Posted on Mar 26, 2009

  • 166 Answers

SOURCE: steps to change oil in 2006 ford escape hybrid.

The oil filter is usually found on the side of engine. Here's a really good how-to guide article on how to change your oil and everything else related to it:

http://yourhandymanzone.com/Your_Handyman_Zone_How_To_Pages_Vehicle_Car_Zone_Cars_Trucks_Vans_Oil_Change_Motor_Oil_Oil­_Filter.htm

This should help!

Good luck,

Brad

Posted on Jun 14, 2009

youredone82
  • 426 Answers

SOURCE: Change Oil light came on my 2006 Ford Escape

The change oil light is controlled by the main engine computer which monitors driving conditions and clock hours. Based on this data it suggest an oil change interval. The system, however has no way to know the oil was changed unless you tell it so. In your owners manual there is a procedure to "reset" this process in the engines computer. its normally done by holding a button and turning the ignition key on at the same time. It should be listed under oil change in the owners manual.

Posted on Aug 29, 2009

  • 4 Answers

SOURCE: reset change engine oil light 2009 ford escape xlt

This is how it works on my 2010 Escape. There are 3 buttons to the lower left of your steering column (Info, Setup, and Reset):
1) when it's displaying the "oil change required" message, hit the "reset" button to get rid of the message2) then hit the "Setup" button twice and you'll see the "oil life" screen, which is now at "0%". It tells you what to do next (i.e. "hold reset" until it say 100%).

Posted on Oct 23, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I serviced my ford escape 2012 model and it is


Just had this problem on a 2013 Escape. The indicator needs to be reset.

Oct 11, 2014 | Cars & Trucks

1 Answer

How to reset the oil change light on a 2012 ford fiesta


Check out this post to reset light.
http://oilresetpro.com/how-to-reset-oil-light-on-ford-fiesta/
They also have a free app available on Android and iOS that has every vehicle reset procedure in it. Super helpful for technicians like myself.
Hope this helps someone else as much as it helps me.

Jun 17, 2012 | Ford Fiesta Cars & Trucks

1 Answer

The "Change Oil Now' light came on and I had the oil changed and the air filter replaced but the light won't go off. How do I turn it off? Thanks.


Press the setup button until you see a message that says something like oil life XXX% pres reset if new oil. Press the reset button. it should change to if new oil hold reset button. Press and hold the reset button until the display changes to 100%

Oct 18, 2010 | 2005 Ford Escape

1 Answer

Turn off change oil light in a 2009 Ford Escape Hybrid


PLEASE TELL ME ABOUT MANUAL PROCEDURE OF RESET OF THE MEMORY OF THE FORD ESCAPE HYBRIDE 2006 AFTER REVISION

May 10, 2010 | 2007 Ford Escape Hybrid FWD

3 Answers

Reset change engine oil light 2009 ford escape xlt


This is how it works on my 2010 Escape. There are 3 buttons to the lower left of your steering column (Info, Setup, and Reset):
1) when it's displaying the "oil change required" message, hit the "reset" button to get rid of the message2) then hit the "Setup" button twice and you'll see the "oil life" screen, which is now at "0%". It tells you what to do next (i.e. "hold reset" until it say 100%).

Mar 14, 2010 | Ford Escape Cars & Trucks

3 Answers

2008 Ford Escape oil change message


to reset the oil monitoring system to 100% , press SET control to access the system check functions , press and release the SET control to display OIL CHNG XXX% HOLD SET NEW , press and hold the SET control for 2 seconds to display OIL CHANGE SET TO 100% , oil life is now reset . thank you !

Dec 30, 2008 | 2008 Ford Escape

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

290 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77194 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

fordexpert

Level 3 Expert

5579 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...