Question about Hyundai Cars & Trucks

Open Question

04 hyundai tiburon 2.0 head bolt sequence and torque

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

wilsodfarm
  • 986 Answers

SOURCE: Head bolt torque spec and sequence

Torque to yeild bolts need to be replaced whenever the head comes off.....Long bolts are 46 ft lbs. and the turn 90 degrees (1/4 turn) short bolts are 43 ft. lbs. and then 90

Posted on Oct 21, 2009

  • 137 Answers

SOURCE: i have no book on

1.8L
Head bolts:
(M10) 30 Nm (300 kg.cm; 22 lb.ft) + (60°to 65°) + (60°to 65°)
(M12) 35 Nm (350 kg.cm; 26 lb.ft) + (60°to 65°) + (60°to 65°)

Camshaft:
Using two or three steps, tighten the bearing caps to 12-14 Nm (120-140 kg.cm, 9-10 ft. lbs.)

Posted on Sep 24, 2010

  • 163 Answers

SOURCE: does anyone know the head

The Sequence is as follows:

<----Camshaft Sprocket
8 - 6 - 1 - 3 - 9
10 - 4 - 2 - 5 - 7

Tighten the 10mm bolts to 22ftlbs as you get to them in the sequence and the 12mm bolts to 26ftlbs.

Then go around the sequence again tightening every bolt an additional bolt 60 degrees.

Once again go around the sequence again tightening every bolt an additional bolt 60 degrees.

And you should be done.

Posted on Dec 20, 2010

Mechanic65
  • 142 Answers

SOURCE: 2004 hyundai Santa fe 2.4l head bolt torque and sequence

Head bolt torque with new head bolts
1. Torque all head bolts to 14 Ft Lbs in torque sequence.
2. Tighten all head bolts 90 Degrees
3. Fully loosen all head bolts in reverse sequence.
4. Torque head bolts to 14 ft lbs in sequence.
5. Tighten all 90 Degrees in sequence.
6. Tighten all 90 Degrees in sequence.
If you are not replacing head bolts start at #4


<----- Cam shaft sprocket end

8 6 1 3 9
o o o o o

o o o o o
10 4 2 5 7

Posted on Sep 30, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need head bolt torque specs for a 1996 saturn sl


Quote:





Originally Posted by norvelplagbao52

1993 saturn sl2 1.9 dohc cylinder head torque
specs and sequence
Cylinder head bolt
tightening procedure:
CYLINDER HEAD BOLT TIGHTENING SEQUENCE:

INTAKE
SIDE
8 4 1 5 9

7 3 2 6 10
EXHAUST SIDE

In sequence,
torque the cylinder head bolts. Torque: 30 Nm (22 ft-lbs).
In sequence,
torque all bolts. Torque: 50 Nm (37 ft-lbs)
In sequence, turn each bolt an
additional 90 degrees.





Originally Posted by norvelplagbao52

1993 saturn sl2 1.9 dohc cylinder head torque
specs and sequence
Cylinder head bolt
tightening procedure:
CYLINDER HEAD BOLT TIGHTENING SEQUENCE:

INTAKE
SIDE
8 4 1 5 9

7 3 2 6 10
EXHAUST SIDE

In sequence,
torque the cylinder head bolts. Torque: 30 Nm (22 ft-lbs).
In sequence,
torque all bolts. Torque: 50 Nm (37 ft-lbs)
In sequence, turn each bolt an
additional 90 degrees.

Sep 19, 2013 | 1996 Saturn SL

1 Answer

Cylinder head bolt tightening sequence for isuzu rodeo 1998


1998 Isuzu Truck Rodeo 2WD 2.2L MFI DOHC 4cyl

The Head Bolt Torque

Torque sequence ----------------- front ' 7 3 1 5 9 ' of ' ' engine ' 8 4 2 6 10 ' ----------------- Step 1: torque bolts in sequence to 18 Ft/Lbs Step 2: turn bolts in sequence an additional 90-degrees Step 3: turn bolts in sequence an additional 90-degrees Step 4: turn bolts in sequence an additional 90-degrees recheck final torque in sequence

1998 Isuzu Truck Rodeo 2WD 3.2L MFI DOHC 6cyl

The Head Bolt Torque

Torque sequence -------------- front ' 6 1 3 7 ' of ' ' engine ' 5 2 4 8 ' -------------- Step 1: torque to 20 Ft/Lbs Step 2: torque to 47 Ft/Lbs recheck final torque in sequence

Jan 15, 2013 | 1990 Isuzu Spacecab

1 Answer

2004 hyundai Santa fe 2.4l head bolt torque and sequence


Head bolt torque with new head bolts
1. Torque all head bolts to 14 Ft Lbs in torque sequence.
2. Tighten all head bolts 90 Degrees
3. Fully loosen all head bolts in reverse sequence.
4. Torque head bolts to 14 ft lbs in sequence.
5. Tighten all 90 Degrees in sequence.
6. Tighten all 90 Degrees in sequence.
If you are not replacing head bolts start at #4


<----- Cam shaft sprocket end

8 6 1 3 9
o o o o o

o o o o o
10 4 2 5 7

Sep 30, 2012 | 2001 Chevrolet Venture

2 Answers

I need the torque pressure for a 97 Hyundai tibaron 1.8 liter 4 cylinder on the rocker arm bolt or the head gasket bolts


zjlimited_1685.jpg

Fig. 12: Cylinder head bolt loosen and tighten sequence - 1.5L (VIN K), 1.6L (VIN R), 2.0L (VIN F) and 1996-98 1.8L (VIN M) engines

  1. Install the cylinder head using a new head gasket. Tighten head bolts to proper torque specification in sequence.

    2.0L (VIN F) and 1996-98 1.8L (VIN M) engines-Tighten M10 bolts to 22 ft. lbs. (30 Nm), plus 60°-65°, plus 60°-65°. Tighten M12 bolts to 26 ft. lbs. (35 Nm), plus 60°-65°, plus 60°-65°. 1.5L (VIN E), 1.5L (VIN J) and 1.5L (VIN K) engines-51-54 ft. lbs. (71-75 Nm). 1.6L (VIN F), 2.0L (VIN P) and 1994-95 1.8L (VIN M) engines-65-72 ft. lbs. (90-100 Nm).
  2. Install the rocker cover.

Hope helps.

Aug 05, 2011 | Hyundai Motor 1997 Tiburon

1 Answer

Correct pressure for torque the head of mazda pickup 1998


Since you didn't say which engine you have, I've pulled torque specs for 3 different engines. Also, since I can't include a diagram showing the relative locations of the numbered head-bolt locations, it would be a good idea for you to purchase a vehicle specific repair guide that will show this info.


Take particular note about the TTY (Torque to Yield) bolts used on 2 of the 3 engines shown. It is said that new head bolts MUST BE USED when head is replaced or re-installed to obtain the proper torque.



B2500 4 Cylinder

Torque sequence: --------- ' 10 6 2 4 8 ' front ' ' ' 7 3 1 5 9 ' -----------Step 1: torque in sequence to 51 Ft/Lbs Step 2: torque again in sequence to 51 Ft/Lbs Step 3: final tighten all bolts an additional 90 to 100 degrees recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) that permanently stretch during the initial installation. New head bolts must be used when cylinder head is replaced or re-installed to obtain proper torque.







B3000 3.0 6 Cylinder

Torque sequence ---------- ' 6 4 2 8 ' ' ' ' 5 1 3 7 ' ---------- Step 1: torque to 59 Ft/Lbs Step 2: loosen in sequence (1) full turn Step 3: torque to 41 Ft/Lbs Step 4: torque to 73 Ft/Lbs









B4000 4.0 6 Cylinder

Torque sequence --------- ' 5 1 3 7 ' ' ' ' 6 4 2 8 ' --------- Step 1: torque cylinder head bolts in sequence to 26 Ft/Lbs Step 2: torque cylinder head bolts to 56 Ft/Lbs Step 3: turn cylinder head bolts in sequence an additional 90-degrees recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) that permanently stretch during the initial installation. New head bolts must be used when cylinder head is replaced or re-installed to obtain proper torque.


Good luck with this job!

Feb 06, 2011 | 1998 Mazda Pickup

1 Answer

Does anyone know the head bolt sequence and torque numbers for a 1997 hyundai tiburon fx 2.0 model?


The Sequence is as follows:

<----Camshaft Sprocket
8 - 6 - 1 - 3 - 9
10 - 4 - 2 - 5 - 7

Tighten the 10mm bolts to 22ftlbs as you get to them in the sequence and the 12mm bolts to 26ftlbs.

Then go around the sequence again tightening every bolt an additional bolt 60 degrees.

Once again go around the sequence again tightening every bolt an additional bolt 60 degrees.

And you should be done.

Dec 20, 2010 | Hyundai Tiburon Cars & Trucks

1 Answer

1996 hyundai lantra cylinder head torque spec


dak408_40.gif
Revised Bulletin
This TSB supersedes the Cylinder Head Bolt Torque Specifications previously described in TSB # 96-20-003, TSB # 96-20-003-1 and TSB # 97-20-004.
DESCRIPTION:
This bulletin provides torque specification corrections to the 1996 and 1997 Elantra Shop Manual, 1997 Elantra Service Data Book, 1997 Tiburon Shop Manual and 1997 Tiburon Service Data Book.
Please record the corrections (listed) in the appropriate manuals and write the TSB number on the bottom of the pages listed below for future reference.
CYLINDER HEAD BOLT:
(M10) 30 Nm (300 kg.cm; 22 lb.ft) + (60°to 65°) + (60°to 65°)
(M12) 35 Nm (350 kg.cm; 26 lb.ft) + (60°to 65°) + (60°to 65°)

Nov 21, 2010 | Hyundai Motor 1996 Elantra

1 Answer

Looking for torque specs on a hyundai accent gl for the head bolts



  1. For 3.0L engines, tighten head bolts in sequence to 76-83 ft. lbs. (105-115 Nm).
  2. For 2.5L engines, tighten the bolts in sequence as follows:
    1. Step 1: 18 ft. lbs. (25 Nm).
    2. Step 2: Plus 60-64 degree turn.
    3. Step 3: Plus 45-49 degree turn.

Sep 24, 2009 | 2000 Hyundai Accent

2 Answers

NEED SPECS FOR INSTALLATION OF NEW HEAD GASKET 2003


1. Clean both gasket surfaces of the cylinder block and cylinder head. 2. Verify the identification marks on the cylinder head gasket. 3. Install the gasket so that the surface with the identification mark faces toward the cylinder head. 4. Tighten the bolts to the specified torque in the sequence shown below. d2e64d7.gif Cylinder head bolt M10 : 25Nm (250kg.cm, 18lb.ft)+(60°- 65°)+(60°- 65°) M12 : 30Nm (300kg.cm, 22 lb.ft)+(60°- 65°)+(60°- 65°)

Aug 17, 2008 | Hyundai Elantra Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

364 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...