Question about 2004 Toyota Yaris Verso
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
look at your car manual, if u don't have one look
under your hood neer the left or right fender for a blue plastic cap.
Posted on May 03, 2009
have someone pump the pedal and hold it, then you work from the right rear, left rear, right front, left front, while the person pumps and holds several times at each wheel.
Posted on Jun 10, 2009
SOURCE: how do you remove a
Just did this the other day on my 1993 corolla (same engine, etc).
It helps to first get the replacement starter motor so that you have something to look at and see how it looks like, and where the mounting bolts fit.
The starter motor itself is mounted on the back side of the engine with just two bolts, and it is in principle an easy replacement. The downside is that the bolts are not so easy to access, so patience and some good tools are important.
You'll have to raise the front end of the car enough to work under it. Open the hood and
disconnect the battery terminals from the battery. Go underneath the car and disconnect the cables from the old starter motor. One cable goes to a plug-in terminal (press down the retainer clip with a small screwdriver to remove, the other is fastened with a 12mm hex nut.
Now you can remove the two bolts holding the starter motor in place (14mm hex). The bottom-most bolt is accessible from below the engine and faces the passenger side of the car. If the bolt seems hard to get to, cheer up...this is the easy one :-)
The second bolt faces the DRIVER side of the car, and is accessible from under the hood. It's easy to find, but it is surrounded by a lot of cables and stuff that get in the way.
I removed the air filter and used a socket wrench with a hinged handle to get the bolt started, finishing with a regular wrench.As the second bolt loosens, you should have someone else hold the starter motor in place, and catch it as it comes off.
Getting the old starter motor out of the engine compartment is a bit of an obstacle course...I did it by moving away part of the plastic underbody cover on the passenger side. Replacement part goes back in the same way, Again, have someone hold the new starter motor in place while you reinstall the first bolt. Connect the cables to the starter motor terminal, replace anything (like the air filter) that you removed for the installation, reconnect the battery, and turn the key.
I am no mechanic, and it took me about 3 hours once I had everything I needed. Someone more competent could certainly do it faster.
Posted on Oct 29, 2010
Tips for a great answer:
Jan 12, 2016 | 2000 Toyota ECHO
Nov 07, 2014 | 2010 Toyota Yaris
Jul 11, 2012 | 2005 Toyota Yaris Verso
Apr 11, 2011 | 1990 Saab 9000
Sep 14, 2009 | 1996 Ford Bronco
Oct 23, 2008 | 2007 Toyota Yaris
52 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: