Question about 1986 Peugeot 505
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
usually you should do it for peugeot diesel at 122000 miles along with water pump and the tensioner roller that runs under the cambelt too. But to be on the safe side do it at 100000 and save the fortune.
It took me (DIY job) about 6-8 hours as i wanted to save 450 pounds.
Posted on Sep 04, 2009
if it says the diesel filter, then that is what it means,a fuel filter.normal service requirement on any vehicle and can be done for small dollars at any garage
Posted on Dec 04, 2009
an approved/competent peugeot dealer with peugeot diagnostic equipment can connect it to your vehicle and check the signals from the camshaft and crankshaft sensors. there shouldn't be any doubt about it. the engine control unit(ecu) needs both sensor readings(to identify which cylinder to inject fuel into)before it can start. a new cam sensor has a plastic nipple which should be in contact with the target plate when first fitted, this brakes off when the engine is started. it is used to ensure the correct gap between sensor and target plate. to large a gap and the sensor may not work correctly. once engine is started this info' is ignored by the ecu. the fuel pressure(measured by another sensor) can also be checked and is displayed on the equipment in "bars". 250bars of pressure are needed for engine to start. one of these (cam, crank, or fuel pressure signals) must be wrong if engine is not starting(assuming uncontaminated fuel). which one determines diagnostic path to be followed.
Posted on Mar 05, 2010
SOURCE: peugeot 307 1.6
peugeot and citreon cars do bite high generaly, it is hydaulic there is no adjustment. but it also depends on how high it is ?? does it slip if you slightly rest your foot on whilst driving?? they do have a problem with the bearings going through the cover as it is the same bearing as a HDI . but you woud notice this as a different problem. ie noise or vibration on pedal. call me for more info .. paul @ the clutch centre..01527 64440 07790438337
Posted on Mar 19, 2010
Tips for a great answer:
Dec 18, 2014 | Peugeot 206 Cars & Trucks
Nov 29, 2014 | Peugeot Cars & Trucks
Jan 31, 2013 | 2005 Peugeot 307 1.6
Dec 16, 2012 | 2004 Peugeot 307 SW
Dec 07, 2012 | 2002 Peugeot 307
Oct 13, 2009 | 1991 Peugeot 405
Jun 08, 2009 | Peugeot 405 Cars & Trucks
Sep 09, 2013 | 1986 Peugeot 505
73 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: