Question about 1999 Ford Ranger SuperCab

Open Question

How does plug wire hook up to coil on 1999 ford ranger 3.0

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

localwonder
  • 6784 Answers

SOURCE: 2004 ford ranger edge 3.0L spark plug wire diagram

The diagram you seek is below.


374d96b.jpg

Posted on Jul 26, 2009

  • 7353 Answers

SOURCE: I have a 2005 ford ranger 3.0L with repetitive engine codes

these engines did have some exh valve issues, service bulletin 05-26-3. one other thing to verify is that the cam synronizer (CMP) is correctly installed. if its not right on, its way off.

Posted on Oct 14, 2009

ministock48
  • 258 Answers

SOURCE: Ignition coil pack on Ranger 1999 misfire on #3

replace coil

Posted on Oct 23, 2009

SOURCE: My 98 ranger is still misfiring on cylinders 2 and

most likely the coil or ignition module

Posted on Dec 11, 2009

czaa
  • 4514 Answers

SOURCE: 1999 Ford Windstar-Will Turn over but won't start?

fuel pressure regulator could hav failed-located by engine or the ignition module may not be workin-by dist area try not to be a parts replacer-buy a repair book

Posted on Jan 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Both coils do not fire on 1 and 4. Will start but only running on 2 cylinders. Could both coils be bad or should I look elsewhere?


Part 3 -How to Test the Ignition Module and Crank Sensor ...

easyautodiagnostics.com > Ford > 2.3L
Mar 1, 2012 - Spark plugs for cylinders #2 and #3 get spark at the exact same time. ...voltage -12 Volts) to both individual ignition coils within the coil pack. ... Ford Mustang or Ranger (or 2.3L Mazda B2300), this is what you'll need ... for this 'Switching Signal' at the coil pack... but you can also test this ... 1991, 1992, 1993.

How to Diagnose a Misfiring Cylinder (2.3L Ford Ranger ...

troubleshootmyvehicle.com > Ford > 2.3L
Apr 3, 2012 - Bad Fuel Injectors can cause a Misfire Condition. ... the ignition system on the 2.3L Ford Mustang or Ranger consists of 2 ignition coil packs, ...

2002 ranger misfire rough idle - Discussion on Topix

www.topix.com > Ford Ranger
Jul 27, 2007 - My truck is giving the code misfire in number 4 cyl. I replaced my spark plugs, Wires, Coil packs (both of them) and all my fuil ... three (3.0L v6) go bad, the fuel/air mixture gets messed up. Judged: 2. 2 ... My truck runs rough only at idle. ...code for ford ranger 2002, 2.3 5speed. truck runs like a champ but that ...

Extremely stumped! I need the best and brightest 1994 Ford ...

answers.edmunds.com > Edmunds Answers

Jan 31, 2016 | Cars & Trucks

1 Answer

Check engine light is on code is P0306 which I believe is the 6 cyl is misfiring. How can I test to see if it is the plug or spark plug wire


Spark plugs don't fail to fire
Wires last,sometimes,the life of the veh,20 years

Go with bad coil pack or COP Coil #6,which ever applies.

Nov 04, 2010 | 1999 Ford Ranger SuperCab

1 Answer

2000 Ford Ranger- engine stalling when slowing down to idol


replace th air idle bypass valve this is located on the throtle body and has 2 screws with 1 plug with 2 wires to it

Dec 29, 2009 | 2000 Ford Ranger SuperCab

2 Answers

1999 Ford Ranger - Running sluggish.All of a sudden jerks sometimes as if when someone is pulling you. Kind of like it is running out of gas but it is not. changed plugs, wires, coil pack and fuel...


Have you checked your fuel pressure? could be a fuel pump issue. any engine DTC's? and did you replace all of those parts before or after the problem started?

Dec 18, 2009 | 1999 Ford Ranger SuperCab

2 Answers

Check engine light flashes on 99 Ford Expedition, hooked it up to computer and says plug # 3 is bad, I replaced it but the light is still on


Try changing the #3 cylinder spark plug wire or all wires as you probabley have to buy them in a set.

Sep 10, 2009 | 1999 Ford Expedition

Not finding what you are looking for?
1999 Ford Ranger SuperCab Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...