Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Since you have electricity, and therefore the resistor is functioning...
Take out the rights side facia under the dashboard. (loosen 3 screws)
Push the two white clips apart to opn the fan box.
Open the box and check for dust and other particles, vacuum, and clean out the engine,
oil w-40 it (axle) a bit, Open the filter box shich perhaps have never been
changes, and then tap the fan engine with a small screw driver
and voila if you are lucky it will come to a rude awakeing...
Often the contacts and the engine just needs overhaul, ie TLC....
Posted on Feb 27, 2009
Have a look at this site, it gives a comprehensive description for setting headlights:-
However, headlight adjustment must conform to the relevant road ordinances and laws of the place of vehicle registration. For your own peace of mind and to comply with legal requirements I suggest that you take the vehicle to a registered center and have the lights set to the standards set by law.
Posted on Mar 04, 2011
Yes, if you are running over- the- road just stop in a State that has vehicle inspections and they can set the lights to their specs. In those States that have an inspection setting the headlight aim is part of the job.
Next method, park your unit about 20 feet from a garage door or the side of a building or carwash. Use some tape or pencil and make 2 crosses. The passenger side is allowed to be high and slightly to the right. A correctly aimed right headlight will focus on the curb or lane marker with the right headlight spot-on the lane marker. This will mean you will be safely within your lane on the right side of your truck as long as the headlight hits the lane marker.
For the left light it is suppose to be almost straight ahead and not tipped out to oncoming traffic. In some States the left light is turned slightly towards the center of your truck. You can check against the crosses you put on the surface of the building and watch the beams move as you adjust the lights. Use some chalk to mark where the tires were so you can get into the same spot.
I had to do some Vehicle Inspections in Texas years ago. I want to say the headlights were suppose to be 42" high at 20 feet, but you have a Peterbuilt. And now some of the cars are barely 48" high.
Posted on Mar 04, 2011
Tips for a great answer:
Oct 29, 2016 | Cars & Trucks
May 28, 2016 | Cars & Trucks
Apr 25, 2016 | Cars & Trucks
Sep 14, 2015 | Cars & Trucks
Sep 04, 2015 | Cars & Trucks
Jan 24, 2015 | Cars & Trucks
463 people viewed this question
Usually answered in minutes!