Question about 2006 Ford Mustang

Open Question

Ford mustang driver window will not go back up after closing door

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76109 Answers

SOURCE: 1989 Exterior Door Handle for Ford Mustang

Once you pull the door panel you will see 2 nuts and a rod clip, that's all that holds it on.

Posted on Nov 10, 2008

Ad
roman1021
  • 102 Answers

SOURCE: window broke and now door won't shut

i would try to clean it out by clean it out i mean take it apart and clean it probly got some class in there not shure open door use a screw driver as a door rip see what it deos

Posted on Aug 17, 2009

  • 59 Answers

SOURCE: I have an 07 Mustang GT. When you open the door,

The window lowering and raising as you open and close the door is normal, it is designed that way to prevent damage to the weather stripping that seals the door glass to the body. The computer controls this action and is activated by the door switch. If the problem is only with the driver door then I would suspect a switch. If the problem is with both doors then I would suspect a computer glitch. Either way I would reccommend taking the vehicle back to the dealer to have it checked out and repaired. Is the car still under warranty?

Posted on Aug 27, 2009

  • 45 Answers

SOURCE: 2003 ford explorer windows will

sounds like a short in the wiring there a drivers door

Posted on Feb 18, 2011

  • 192 Answers

SOURCE: My right window(2002 Convt. Mustang)

This is a common problem with power windows. Everytime the driver's door is opened and closed the wires in the harness between the kick panel and door frame get bent back and forth, and eventually they break. You'll have to remove the rubber boot the wires reside in and visually check to see which one is separated. The bad news is that there's little room to work in, and the cure is to solder the wire back together and tape it.

Posted on Sep 02, 2011

Testimonial: "Your diagnosis is the same as the man who replaced my window regulator & motor. So I am going to the Ford dealer who fixed it the first time for $500."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What would cause window on driver side not to go


could be several things, a bad window switch, or loss connection or bad wire somewhere in door or thru door jam.

Oct 20, 2014 | 2010 Ford Mustang

1 Answer

98 mustang the driver door window when all the way up doesn't close all the way when i shut my door. i can roll it down and up and it is closed then but when i open then close the door it doesn't seal.


It sounds as though it has slipped off it`s track or the track is damaged. It`s only made of plastic. It tends to dry and crack. Sounds like you need a window regulator and they can be ordered through parts stores. The door panel has to come off. Relatively easy to fix with the correct tools.

Apr 22, 2014 | Ford Cars & Trucks

1 Answer

"automatic" window on my 2005 mustang does not


So when it doesn't seal that means the tracks the window have been falling out typically. The door panel needs to come off to inspect the tracks. And if your driver side power window doesn't work, that typically means a seperate problem located in the switch itself. It could also be the wires, so you can run a seperate wire to test the switch by running it directly to the window motor, and pressing the switch down. This can easily be done while the door panel is off so you can hit two problems at the same time.

Oct 20, 2011 | 2005 Ford Mustang

1 Answer

My right window(2002 Convt. Mustang) will go up and down if i open the drivers door completely open. If I start to close, window will not work. It appears when the door is open wide the short closes and...


This is a common problem with power windows. Everytime the driver's door is opened and closed the wires in the harness between the kick panel and door frame get bent back and forth, and eventually they break. You'll have to remove the rubber boot the wires reside in and visually check to see which one is separated. The bad news is that there's little room to work in, and the cure is to solder the wire back together and tape it.

Sep 01, 2011 | 2002 Ford Mustang

2 Answers

Driver Side window not going back up when the door is closed


you cant do it yourself because if iam not mistaken its a module ......ie the vehicle has no wires only a feed wire and a bus line which recieves a computer signal ,to activate the whatever.Hence its a dealer only job because as the door locks are inside the door this means that the software can be encrypted as its classed as security .

Sep 02, 2009 | 2007 Ford Mustang GT California Special...

1 Answer

I have an 07 Mustang GT. When you open the door, the window comes down about an inch. When you close the door, the window goes all the way up. Normal. Now, when I close the door the window wont go up. Why...


The window lowering and raising as you open and close the door is normal, it is designed that way to prevent damage to the weather stripping that seals the door glass to the body. The computer controls this action and is activated by the door switch. If the problem is only with the driver door then I would suspect a switch. If the problem is with both doors then I would suspect a computer glitch. Either way I would reccommend taking the vehicle back to the dealer to have it checked out and repaired. Is the car still under warranty?

Aug 27, 2009 | 2007 Ford Mustang GT California Special...

1 Answer

Window broke and now door won't shut


i would try to clean it out by clean it out i mean take it apart and clean it probly got some class in there not shure open door use a screw driver as a door rip see what it deos

Aug 16, 2009 | 2000 Ford Mustang

1 Answer

The drivers side door on my 93 mustang is not fitting right making it hard to close and open the door. I have to lift it to open or close


check the door hinge pins and make sure they are fully seated. Also check the hinge pin bushings - they are made of bronze and if they wear out, the door will droop

Apr 20, 2009 | 1993 Ford Mustang

2 Answers

1989 ford mustang power window will not go down


check the pwer switch. if you don't detect any sign of live. then you have to open the door panel to check the motor. most likely the motor or the "T" rail cable is broken.

Apr 02, 2009 | 1989 Ford Mustang

1 Answer

1965 mustang door and window problems


latch may be worn out. If so, you need to replace it. Otherwise, make sure it is well lubricated and that the striker on the pillar is positioned correctly. Make sure that the hinge pins are not worn either or door will mis-align sometimes when closing. As for regualtor, first find one. Changing it is pretty much a take-out, put-in and adjust operation. If regulator is riveted in, drill rivets out and replace with pop rivets or nuts & bolts.

Mar 05, 2009 | 1965 Ford Mustang

Not finding what you are looking for?
2006 Ford Mustang Logo

Related Topics:

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...