Question about Infiniti I35

1 Answer

Vibration in Infiniti I35 + small weird sound of operation in transmission on the first start

I just bought a new 2002 I35. I have a vibration under throttle pedal in highway. Even when the car is stopped, I can feel a very small vibration. The front tires are new, but rear are old. Also, When I put the transmission on Drive (D) and start to move, I hear a little ghikhhhh sound for half a second and that's it! It is like releasing a spring with a friction to something else! I am a little worried about this! the behavior of the transmission is good all the times, but I am worried about this sound. The previous owner was a private party and said that this sound is here for more than a year without problem, but I like to know if there is a problem with this and anything that I should take care of?

Posted by Anonymous on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Check for p030x code also the trans can make the noise you describe when it has no malfunction.

Posted on Apr 14, 2017

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 76 Answers

SOURCE: S70 AWD - vibration when in drive

Just in case you are still having an issue.

There is a suspension mount on the right side of the engine bay just under the timing cover. Remove the right front wheel and the two 10mm plastic nuts in the fender liner. Now pull back the fender liner. Using a flash light you should be staring at the crankshaft harmonic balancer (big round circular pulley that has a large bolt, 21mm, in the middle and four smaller, 10mm, bolts around it).

Just under the pulley there is an engine mount turned sideways. Use your flashlight and a mirror if you can't get a good look at it, Most likely you will see that the rubber is pushed apart and in pieces. The upper portion of the mount that bolts to the engine with 13mm bolts will be sitting on the sub frame. There is supposed to be rubber between the upper portion and the frame. Just look closely because from time to time it will just sink into the mount and may look ok unless you look close.

If the mount is ok then you will need to take it to a Volvo shop. There are a couple of service bulletins for vibration and harshness on early (1998-2000 awd cars). They relate to some adjustments or shim instillation on the left side mount, but I can't remember the settings off the top of my head.

I hope this helps.

Posted on Feb 28, 2009

  • 1 Answer

SOURCE: Vibration/Rattling on right side during high speeds

I had a similar problem. The dealer change automatic transmission and differential, but the noise continu. After research on internet i think the problem is the front galiper who create a vibration on the disc wheel and the vibration frequence follow the front axle until interior car. Just press slowly the brake pedal and if the noise stop , that's it the cause i think. I dont change my galiper, but i have a new transmission . :)))

Posted on Jun 04, 2009

Mr BrokRench
  • 1623 Answers

SOURCE: 2003 Hyundai Tiburon making a weird noise

Hello mpolci...The 2003 Tiburon was sold to the public with a defective clutch, it failed due to warpage and bad pressure plate... among other things. There are MANY class action lawsuits. Did you resurface or replace the flywheel when the clutch was replaced? Did you go with an aftermarket clutch kit, or factory? Also the slave cylinder on the 03 was known to have a defective valve.
You can try checking the levels and bleeding the system and if you still have problems, then it could be a release bearing, a loose clutch pad, or a broken pressure plate spring....If the clutch is still under warranty, i would return it to the installer.
Good luck, i hope this helps...please rate me a fixya.

Posted on Aug 01, 2009

cshubart
  • 146 Answers

SOURCE: I have a 2000 Toyota Solara with 27,000 miles on

if it were the rotors it only happens when braking take in have them turn rotors see what happens good luck

Posted on Oct 07, 2009

haileyscrazy
  • 18 Answers

SOURCE: Vibration and noise coming from front end.

YOU PROB. HAVE GOT THIS FIX BY NOW BUT IT SOUND LIKE YOU HAVE A BAD C.V AXLE MY 01 BUICK DONE THE SAME THING AFTER WAISTING MONEY ON TUNE UP ROTATEING THE TIRES BAL. THE TIRE I FOUND IT WAS THE RIGHT AXLE

Posted on Feb 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 i35 serpintine belt adjustment


this car have an adj.,or not.new cars do not have one.

Mar 10, 2013 | 2004 Infiniti I35

1 Answer

How do u wire a kenwood cd player in a 2002 infiniti i35


No idea what this car looks like but either buy a conversion wiring kit or it should as a newer car have a standard plug on the cars wiring that should connect straight to your new one.I advise against fitting a fancy thng like this as it is only a invite for the next druggie to his next fix,My car still has its old tape player and no one bothers with this

Mar 10, 2012 | 2004 Infiniti I35

1 Answer

My car keeps making a clicking sound when I try to start it, eventually it will start but later on it will do the same thing. I have i35 2002. Brand new alternator so I dnt understand what's goin on!


If its a single click every time you turn the key to the crank position you need a starter.

If its a series of clicks when you hold the key in the crank position you need a battery.

Sep 28, 2011 | 2004 Infiniti I35

1 Answer

How do I replace my cam sensors and crank sensor in my 2002 Infiniti I35. I have an 02, not an 04


simple check to see if is the bank 1 or bank 2 cam sensor
do you a code for cam sensor

Apr 26, 2010 | 2004 Infiniti I35

1 Answer

The heater fan is not operating and I thought it might be a blown fuse. I checked the fuse box under the dash and couldn't locate the fuse for the fan by the descriptions given. Do you know which fuse on...


My 2002 I35 has the blower fuse under the hood in the fuse box in the engine compartment. The fuse box cover has the "key" or description of which fuse is which. If the blower fuse is bad and you replace it, only to have the fuse burn again then I would check the blower resistors that are located behind the glove box. Very common for one of these resistors to go bad causing only low speed operation of fan. Burns the fuse when you try to operate the fan on the higher speeds. Good Luck

Nov 17, 2009 | 2004 Infiniti I35

1 Answer

I tried Penzoil synthetic 5w30, is this a good oil for this car? I changed oil june12 @124,262 mi. I now have 128,603mi and my check engine light is on and for the first time my oil was very low. I bought...


some of the nissan/infiniti 3.5L engines have been known to have internal ring/valve seal problems therefore you should either keep a quart or two in your trunk or think about selling it.You should change your oil a little early because synthetic oil tend to break up sludge in your engine the first time it is introduced.Longer intervals are ok after that.

Aug 03, 2009 | 2004 Infiniti I35

1 Answer

How to program 2002 i35 infiniti keyless remote?


The procedure goes like this. First get in the car and lock all the doors. Secondly insert and remove the key repeatedly until the turn signal indicators on the dash flash twice simultaneously, it should be like seven or eight times. Then turn the key on and press the lock button on the remote and the lights should flash again. After that turn the key off and manually unlock and open the drivers door, then shut it. Wait a few seconds then try the remote. 

Apr 28, 2009 | 2004 Infiniti I35

1 Answer

Put new rear rotors and pads on my 2002 I35 Infinity, now have very weak pedal , have to pump the brakes in order to stop, doesn't maintain pressure.


Doesn't sound like the brake lines were bled properly. Many times after pad and rotor installation if the lines are bled correctly you will have to pump them initially after the repair for a couple of minutes until the pressure is built back up. Also check the master cylinder and make sure fluid level is ok.

Apr 13, 2009 | 2004 Infiniti I35

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Infiniti Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14338 Answers

Are you an Infiniti Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...