Question about 1999 Chevrolet Suburban
All the parts fell out so im trying to find a diagram
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Worn side bearings is where the noise is coming from and might as well do both sides, I used replace them in about 2-4 hours, depending on where Murphy happened to be. Disconnect both side inner CV joint, front prop shaft and the 4X4 actuator line. If you want to drop the front pumpken. Not sure if you have enough room if you want to change the bearing without removing the pumpken from the frame. You should see when you disconnect the CV shaft.
The front diffs are toys compared to the rear, if you use auto4wd too much there are bearings in your tranfer case that are similar to the side bearings in the front diff. In both appearance and durability and soon you'll replace those too.
Good luck and keep me posted.
Posted on May 26, 2009
Tips for a great answer:
Nov 10, 2012 | 1999 GMC Suburban
Nov 03, 2011 | 1999 GMC Suburban
May 15, 2010 | 1999 GMC Suburban
Feb 05, 2010 | 1999 Dodge Durango
Feb 01, 2010 | 2008 Chevrolet Suburban
Dec 30, 2009 | 1999 GMC Suburban
Sep 23, 2009 | 1999 Chevrolet Suburban
May 21, 2009 | 1999 Chevrolet Suburban
53 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: