Question about 2001 Dodge Intrepid
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Code 12 is: Direct battery input to PCM was disconnected within the last 50 key-on cycles.
Code 21 is: Neither rich nor lean condition detected from the oxygen sensor input or oxygen sensor input voltage maintained above the normal operating range.
Posted on May 23, 2008
The Water pump on your Intrepid 2.7L.
Is located in front of the engine, But you can't see because is inside of the timing cover.
And the Water pump is driven by the Timing chain.
I hope this help on your question.
Thank you for use fixya..
Posted on Jan 15, 2009
SOURCE: 2001 Dodge Dakota Engine Light
below is coped directly from Chrysler. sorry but if you have that code you need a PCM
P0601-PCM INTERNAL CONTROLLER FAILURE
POWERTRAIN CONTROL MODULE
TEST ACTION APPLICABILITY
1 NOTE: This DTC indicates an internal PCM problem.
If there are no possible causes remaining, view repair.
Replace and program the Powertrain Control Module in accordance
with the Service Information.
Perform POWERTRAIN VERIFICATION TEST VER - 2.
Posted on Mar 25, 2009
This code indicates an automatic transmission control problem. The presence of this code means that the transmission control module or TCM has detected a fault and relayed it to the PCM. It could be a TCM related solenoid has failed or is damaged or the TCM itself could be faulty. Best wishes.
Posted on Aug 18, 2009
it might be the cam shaft sensor it might be the crank shaft sensor the best thing to do is replace them bolth. but it does sound like it may be either one because if one goes out the other will still work but when starting the car it will take longer for it to read from either or the one sensor that is still working because they work together to tell the system to deliver the gas. im pretty positive that it is either the cam or crank shaft sensor
Posted on Jun 21, 2010
Tips for a great answer:
May 01, 2016 | 2001 Dodge Intrepid
Oct 29, 2013 | 2001 Dodge Intrepid
Feb 07, 2013 | 2001 Dodge Intrepid
Jun 27, 2012 | 1999 Dodge Intrepid
Sep 08, 2011 | 2001 Dodge Intrepid
Apr 08, 2010 | 2001 Dodge Intrepid
Mar 16, 2010 | 2001 Dodge Intrepid
Nov 18, 2009 | 2001 Dodge Intrepid
Apr 14, 2009 | 2001 Dodge Intrepid
83 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: