Question about 2010 Mini Cooper

Open Question

2010 mini cooper stuck in park

The manual release is loose

Posted by Anonymous on

6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 14 Answers

SOURCE: Gear stick

Mini's have had problems in the past with the shift cables coming off or breaking. No worries: the only danger is that you will be stuck in the gear you where in when the cables break. No damage to the car will occur. You should check out the recall notices. Good luck

2002 Mini cvt owner

Posted on Jun 25, 2008

  • 26 Answers


I think the web site is called NUTS AND BOLTS .COM

Posted on May 03, 2010

  • 1 Answer

SOURCE: ambient lightning

I have a 2010 mini clubman. To change the color I have a switch up by the sunroof the 2 outside switches do the reading lights then the next on in changes the color of the interior. if you press this it will change one time. Hold it and it will run through all colors. Hope this helps. If not call the dealer they can help.

Posted on May 04, 2010

  • 8215 Answers

SOURCE: I released the hood from the drivers side of my

The release is on the right side of the grill and pulls up.

Posted on Jan 27, 2011

  • 22156 Answers

SOURCE: mini cooper 2004 rear wiper parking fault

the problem will be in the gearbox on the wiper motor ,inside this gearbox on teh end where the drive comes out is a set of contacts and the brushes are not making contact or the path has worn out or broke ,so best advice is to ignore the fault as a new motor is not that cheap unless you can find one in the scrap yard

Posted on Mar 15, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My car is a 1997 SL manual swift, and I was driving and my shift got stuck on 2nd but the stick is loose and wont come out of 2nd at all. Someone told be that may be a broken cable, but i dont think manual...

It could be the transmission first of all. It could be the cable if it is equipped. It may be the master cylinder or release cylinder. It could be the release bearing or lever.

Feb 19, 2011 | 1997 Saturn SL

1 Answer

2000 astro I set the parking brake but when I pull the handel to release it nothing happens. the lower panel was droped down and I think something came lose at that time. I don't have anything to go by...

Oh Oh try to release cable at control if cable is loose its siezed cables at drum get vise gripes to push pack toward drums & to pull drums to fully release

Aug 30, 2009 | 2000 Chevrolet Astro

1 Answer

2002 Explorer rear liftage latch replacement

Liftgate Latch Remote Control Removal and Installation
  1. Remove the liftgate trim panel. For additional information, refer to Section 501-05.
  1. Remove the watershield.
  1. Disconnect the actuator electrical connectors.
  1. Disconnect the liftgate window glass latch release cable.
    1. Release the cable conduit.
    1. Disconnect the cable.
  1. Disconnect the liftgate latch release cable.
    1. Remove the cable conduit.
    1. Disconnect the cable.
  1. Release the exterior liftgate release handle actuating rod.
    1. Open the clip.
    1. Release the rod.
  1. Remove the bolts and the liftgate latch remote control.
  1. To install, reverse the removal procedure.
    • Transfer parts as necessary.

Jun 01, 2009 | 2002 Ford Explorer

1 Answer

I have a 1997 S10 pickup. It is a manual

Could be heat shield for cadalitec converter, or inside converter has broken loose, or a hainger for your exhaust has broken.

Mar 04, 2009 | 1997 Chevrolet S-10 Pickup

1 Answer

1993 toy.p/u hood release wont open hood

Your cable anchor that holds the cable is loose or is pivoting causing your latch not to have full stroke. Hope this fixes your problem.

Dec 11, 2008 | 1995 Toyota Pickup

2 Answers


One of the 2 cables on my hood release is loose. One works fine and releases (dirver's side) but the other is loose and does not. I cannot get my hood up. I have a 1998 Jaguar XJ8
Thank you ....

Aug 06, 2008 | Avanti Studebaker Cars & Trucks

1 Answer

2000 chevy blazer lift gate stuck shut. when pressing the button (outside and inside) to open you can hear the motor but nothing happens. Was advised to remove carpet over panel to locate a hole that would...

No hole behind the carpet. You need to get to where the striker on the glass meets the latch (at the top, center of the tailgate). The latch release actuator has a broken lever that pushes against the latch to release it. Common problem. There is a screw holding the trim panel near the latch area. You are gonna have to force it loose. You need to pull back the panel at the latch area so you can get a tool (or a finger) down inside next to the latch and manually release it. There is a pivot on the latch you need to push down to release the latch. Once opened, remove the trim panel. You will then see a big silver panel covering the inside of the tailgate panel. You will see the actuator that needs replacing (it's held on with rivets). Drill out the rivets and install bolts if you don't have a rivet tool.

Jun 29, 2017 | Chevrolet Blazer Cars & Trucks

1 Answer

Car will not come out of park

You must press on the brake pedal to release the shift lever. Start the car, and have someone watch the rear brake lights as you press the brake pedal. If the rear brake lights do not turn on when the brake pedal is pressed, the plug for the brake light switch is probably off. This will also keep the shift lever locked. Check around and underneath the brake pedal for any loose wires or plugs and repair as necessary. You can manually release the shifter by inserting a key or screwdriver into the shifter release slot. Check owners manual for the location of the release slot.

Jun 08, 2008 | 2004 Honda CR-V

Not finding what you are looking for?
2010 Mini Cooper Logo

Related Topics:

357 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mini Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

75822 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Mini Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides