Question about 1993 Toyota Tercel

Open Question

Toyota tercel torque converter torque

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
losflip
  • 94 Answers

SOURCE: blown head gasket on a 1983 toyota tercel

The head bolt torque is 48ft. pounds and the camshaft bolts are 16ft. pounds thats for a 1.5L S.O.H.C motor.

Posted on Dec 04, 2008

Ad
  • 1861 Answers

SOURCE: need to find specks on cylingder head for 1996 toyota tercel

The cylinder head bolt torque is a 2 step process.

First: Torque all of the bolts to 45 Nm (450 Kgf-cm or 33 ft lbs.)
Replace any head bolt that will not torque to the above specs.

Second: after all ten bolts are torqued to the above specs, the head bolts are then "Torqued to Distance"...

Starting at the center bolts, retorque all ten bolts an additional 90 degrees.

Hope this helps, the graciousness of a FixYa rating would be greatly appreciated.

Posted on Jan 21, 2009

  • 14036 Answers

SOURCE: need torque specs for rod bearing caps on 1995 toyota terel 4 cyl

1.6 engine 36 ft lbs 1.8 engine 36 ft lbs 2.0 engine 49 ft lbs

Posted on Apr 11, 2009

  • 701 Answers

SOURCE: torque specs for toyota tercel

Hello vienotkelly: The correct Main bolt torque is 42 foot pounds. The connecting rods torque to 29 foot pounds. The torque sequence for the head bolts and the correct way to tighten the bolts are attached to this reply. Thak You for using6bd0ae1.jpg FixYa. Roger

Posted on Apr 15, 2009

terseo
  • 92 Answers

SOURCE: torque specs for 1998 tercel 1.5L

Main Bearing Cap Torque-42 Ft. Lbs.
Head Bolts Step 1-33 Ft. Lbs. Step 2- Additional 90 Degrees
Rod Bearing Nuts-29 Ft. Lbs.

Hope this helps

Posted on Sep 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I torgue the piston/ cranque of my toyota tercel 1997


29 pounds on rod bearing
42 pounds on main bearings
thank you and please reply

Jul 09, 2015 | 1995 Toyota Tercel

1 Answer

I need to remove my transmission from my 1994 Toyota Tercel but we have removed the bolts from it and it still is not releasing. What should I do?


As long as you are SURE all the bolts are out and the torque converter bolts you should stick a pry bar between the belhousing and engine block and gently pry the 2 apart, the dow pins tend to get stuck.
This should require little force if you have to pry too hard you may have a bolt still in.

Sep 18, 2009 | 1994 Toyota Tercel

1 Answer

Need torque specs for rod bearing caps on 1995 toyota terel 4 cyl


1.6 engine 36 ft lbs 1.8 engine 36 ft lbs 2.0 engine 49 ft lbs

Apr 11, 2009 | 1995 Toyota Tercel

2 Answers

Torque specs for toyota tercel


Hello vienotkelly: The correct Main bolt torque is 42 foot pounds. The connecting rods torque to 29 foot pounds. The torque sequence for the head bolts and the correct way to tighten the bolts are attached to this reply. Thak You for using6bd0ae1.jpg FixYa. Roger

Apr 08, 2009 | 1998 Toyota Tercel

1 Answer

Torque specs for 1998 tercel 1.5L


Main Bearing Cap Torque-42 Ft. Lbs.
Head Bolts Step 1-33 Ft. Lbs. Step 2- Additional 90 Degrees
Rod Bearing Nuts-29 Ft. Lbs.

Hope this helps

Apr 08, 2009 | 1998 Toyota Tercel

1 Answer

Need to find specks on cylingder head for 1996 toyota tercel


The cylinder head bolt torque is a 2 step process.

First: Torque all of the bolts to 45 Nm (450 Kgf-cm or 33 ft lbs.)
Replace any head bolt that will not torque to the above specs.

Second: after all ten bolts are torqued to the above specs, the head bolts are then "Torqued to Distance"...

Starting at the center bolts, retorque all ten bolts an additional 90 degrees.

Hope this helps, the graciousness of a FixYa rating would be greatly appreciated.

Jan 21, 2009 | 1996 Toyota Tercel

1 Answer

Blown head gasket on a 1983 toyota tercel


The head bolt torque is 48ft. pounds and the camshaft bolts are 16ft. pounds thats for a 1.5L S.O.H.C motor.

Dec 03, 2008 | 1983 Toyota Corolla Tercel

1 Answer

Manifold gasket replacement -- 1983 Toyota Tercel


remove the exhaust manifold with a 14mm. socket and pull off old gasket, may have to be scraped, install new and torque bolts to 33 FT. LBS......... same with intake manifold but 10mm. and 12 FT. LBS of torque and drain coolant.

Nov 16, 2008 | 1983 Toyota Corolla Tercel

1 Answer

1985 toyota tercel


My car Toyota tercel 1985, don't stop. How test the brakes?

Jun 28, 2008 | 1985 Toyota Tercel

Not finding what you are looking for?
1993 Toyota Tercel Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8567 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...