Question about 1992 Dodge Dakota
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: serpentine belt on 1992 dakota
You don't mention which engine you have in your '92 Dakota, but it's likely the 3.3L and if so, here's the diagram. Even if your engine is not the 3.3L the principals for replacing the belt are the same.
Get a serpentine belt tension release tool (local parts store) and use it to take the tension wheel away from the belt, which will make it loose enough to remove by simply pulling it off one of the pulleys (the alternator will be easiest) and then wiggle it out of the engine bay. The tool should come with a selection of heads for the different variations of tensioner arms/bolts. Once the belt is removed, replacing it is the reverse process.
Hope this helps, and please rate my answer.
Posted on Jan 08, 2009
hmm well there are 2 solutions to this that i can give cause i dont have the wiring diagram for that truck..
The first would be to set with a multimeter and test the wires under the dash for the hot, and axcessories wire.
The second would be to run 2 wires directly from the battery to the inside of the vehicle and connect the radio using that.
The second solution is self explained so lets discuss the first.
The truck came with an original radio. connected to this raid is a jack with a bunch of wires. remove the connector. with keys out the ignition test every wire until you get 12V.. thats your hot wire. this wire always has power. Now lable that wire and push it aside. turn the ignition on and test the remaining wires until you get 12v .. thats the ignition wire or acesories. this only has power with the ignition on. The remaining paired wires are for the speakers. connect the new deck and vonnect the wires one pair at a time to determine their location. or ypu can look at the wires connect directly to the speakers to see which wires go to which. .. you can use the body of the truck as a ground.
Posted on Apr 02, 2009
It is located behind the breather, on the passenger side of the distributor. If you are having low oil pressure I'll give you a tip. You can change the sensor, but if that doesn't work, then the problem very likely could be that, dodge dakotas are notorious for a buildup of sludge on the screen of the oil pump, which blocks the flow of oil. If you are going to drop the oil pan to address this you may as well put a new oil pump in while you are at it. They are 30-50 dollars. If you can do it yourself, the whole operation should cost less than 100 dollars, if you take it to a garage, you better have a fat wallet.
Posted on May 30, 2010
Follow the upper radiator hose back to the engine and the thermostat housing. The sensor should be in the t-stat housing.
Posted on Jul 24, 2010
Tips for a great answer:
Jan 23, 2016 | Dodge Cars & Trucks
May 16, 2014 | 1992 Dodge Dakota
Aug 14, 2011 | 1992 Dodge Dakota
Jan 27, 2011 | 1992 Dodge Dakota
Sep 09, 2010 | 1992 Dodge Dakota
Mar 28, 2010 | 1992 Dodge Dakota
Feb 07, 2010 | 2001 Dodge Dakota
Jun 18, 2009 | 1992 Dodge Dakota
Aug 13, 2008 | 1992 Dodge Dakota
Jan 09, 2017 | 1992 Dodge Dakota
79 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: