Question about 2002 Toyota Camry

Open Question

2002 camry power door lock drivers side does not work with either switch or remote

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1861 Answers

SOURCE: 2002 toyota celica power door lock problem

Are you hearing any noises from the pass door when you activate the lock switch? If not, the power door lock solenoid has failed, and prob needs to be replaced. Pull the door panel & check to see if it is getting power to the solenoid in lock & unlock. If it has power, the solenoid is def bad.

Posted on Sep 19, 2008

emissionwiz
  • 75807 Answers

SOURCE: Single power door lock does not work

If it doesn't work from master switch then the door lock motor actuator will need to be replaced, this requires pulling the door panel.

Posted on Sep 20, 2008

countrysi248
  • 443 Answers

SOURCE: Camry 1999 power windows and door lock didn't work

did you check the relay under the hood ? look and see if you can find your power box under the hood and under the lid of that box you will find the location of the window relay check that first before tearing into the door panel switches .. thanks Jerry and holler if you need more

Posted on Apr 12, 2009

goofduck
  • 490 Answers

SOURCE: Power lock on driver side door does not work on2003 Toyota Celica

remove the door panel and change the solenoid on the inside of the door

Posted on Apr 16, 2009

jmgldsmth
  • 1869 Answers

SOURCE: 2004 Camry front driver door lock will only lock/unlock with key

Remove the door panel and reconnect the plug going to the front driver door lock or, if you can hear the motor trying to engage the door lock cam when you press the lock/unlock remotereconnect the door lock lever bar

Posted on Jun 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

In my 2009 toyota camry driver side door get open with remote and from in side same but other door wont open with remote and even in side switch.


It sounds like the lock connecting rod is loose or the servo is not working. Does the passenger side door open with the key? If it does, the connecting rod is OK, but the servo will still be no 1 suspect.

Mar 02, 2015 | 2009 Toyota Camry LE

1 Answer

I have a 2002 Camry and only the drivers side window will go down. the service rep at the dealer ship told me to check the window lock. where is that located? thanks


it's located on the switch panel on the drivers door. you have one switch for each window, and one for the power locks. the remaining switch is for the window lockout. press it down & release it. the other windows should now work!

Mar 08, 2010 | 2002 Toyota Camry

3 Answers

Driver side door doesn't lock or unlock with the remote. The rest of the doors work fine.


Does the Driver side door lock and unlock from the lock switch inside? If not then you have a bad motor or bad connection to the lock/unlock motor inside the door.

Jan 08, 2010 | 2004 Toyota Camry

1 Answer

Remote entry only opens driver door


may be needed reprogramming the remote control

Aug 24, 2009 | 2004 Toyota Camry

1 Answer

Camry 1996 automatic power lock doen't work, but windows work.


if you can here relays when unlocking/locking check for power at door lock actuators inside doors, if you have power on lock/unlock and good earth from connector actuators are faulty.
if no power on test light when operating check output from central door lock module while operating, none coming out of module then it might need replacing.
check 30Amp power fuse for main relay under bonnet (which goes to pin 8 white/blue on module)and 10Amp gauge fuse in cab(pin 1 blue/red on module),pin 15 is also power when relay is on(red/blue) with test light, and module/ actuators.
check outputs from module pin 3 & 4
blue/red
blue/black
that go to door locks

Jul 20, 2009 | 1996 Toyota Camry

1 Answer

How can I re active the wireless remote control system ?


sit in car all doors closed put key in ignition and turn from OFF to ACC 3 times as fast as you can leaving it in ACC on the last cycle then press your remote button. your blinkers should flash to tell you this has worked.... may take you a couple of tries to get it!!

Jun 30, 2009 | 2002 Toyota Camry Solara

1 Answer

Power locking system


Do you have a remote starter installed in this vehicle? If so, you body computer is probably compromised. Aftermarket remote starters kills the body ECU with unfortunate regulararity.

Sep 12, 2008 | 2002 Toyota Camry

Not finding what you are looking for?
2002 Toyota Camry Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...