Question about 2002 Buick LeSabre
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: power window front passenger
I had the same problem on my 1992 lesabre. The solution is to test the window motor itself with an external 12 volt power supply ( I used the car battery and some jumper cable w/ 2 screw drivers - not recommended for amatures! LOL) First remove the door panel which is difficult but you'll figure it out if you are qualiifed to repair your window yourself. Then test the window moptor if it functions (in both directions) THEN IT IS THE WINDOW SWITCH, A FUSE OR A RELAY. If the moter does not function then replace the motor
You can get a new window motor on ebay or at your local junk yard or (god forbid) the dealership
Posted on Jul 28, 2008
SOURCE: 2002 door panel
gently pry around the edges of the door panel, you'll hear about 7-8 connectors pop out, then the panel will come off. the new regulator will likely come with replacement connectors in case you break one. hold the window up with screwdrivers and loosen the bolts where the window rests on the lifter. from there i believe there are just 3-4 bolts holding the regulator in, and it comes out pretty easily compared to other cars ive done. just reverse to reinstall. another note, the window rests 2 pieces of flat rubber folded over (like a taco is the best way to describe it) and after time they can get stuck on the glass. GENTLY pry them off because some rubber stuck to the window and it wouldnt fit in the new regulator, so i had to take it all back out and scrape the rubber off the window
Posted on Aug 04, 2008
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
Posted on Aug 14, 2009
My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.
CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Posted on Mar 06, 2010
Tips for a great answer:
May 06, 2015 | 2002 Buick LeSabre
Nov 13, 2013 | 2002 Buick LeSabre
Oct 29, 2010 | 2003 Buick LeSabre
May 14, 2010 | 2002 Buick LeSabre
Jun 28, 2009 | 2002 Buick LeSabre
May 05, 2009 | 2001 Buick LeSabre
Apr 22, 2009 | 2002 Buick LeSabre
Mar 08, 2009 | 1998 Buick LeSabre
Jan 22, 2009 | 2002 Buick LeSabre
Dec 29, 2008 | 2005 Buick LeSabre
119 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: