Question about Cars & Trucks

Open Question

Iveco. Stralis codes. Etc. 75

Code. Etc 75. Comes up. On dash. And. Won't. Select a. Gear

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

redds55
  • 2620 Answers

SOURCE: I have a Dodge Caravan

Check cam position sensor maybe faulty

Posted on May 10, 2011

  • 14 Answers

SOURCE: car won't start there is

Hi,
I just wanted to show you what I found on the internet regarding p1684:
"P1684 engine code

The P1684 code simply means that the battery has been disconneted within the last 50 starts."

Posted on May 16, 2011

  • 1509 Answers

SOURCE: 1999 ford gear handles

Two things happen. On collum shift cars and trucks the bolts work loose out of the shift lever to the cable under the dash where the shift cable connects to the steering collum. the cable connects to a lever that is connected the the shift tube ( part of the steering collum ) bolt heads are 30 torx. the other thing that happens is the cable comes off the trans mission lever and it just snaps on. The bushing waers out and the cable just comes off the pin on the lever coming out of the transmission. Front wheel drive cars it's on the top and rear wheel and trucks it's on the side ( happens less on these and then the cable can break it'self, and the shift cable has to be replaced sometimes if the bushing in the end fails at the transmission end.

Posted on Jun 10, 2011

  • 4 Answers

SOURCE: 2002 Dodge Stratus 2.7 Litre code P0700 P0605

try reverse then try putting it into drive.

Posted on Nov 17, 2011

johnjohn2
  • 5763 Answers

SOURCE: My xr6 won't start. Comes up saying immobilized.

do you have another key you can try, maybe the anti theft key immobilizer.

Posted on Apr 15, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 chevy impala won't start but everything comes on


you have a shorted battery (have it tested) or there is a loose connection. A starter motor pulls a large amount of current when it engages, a loose conection or shorted battery will all the voltage away from the dash,lights etc.

Apr 04, 2013 | 2000 Chevrolet Impala

1 Answer

Honda civic stuck in deadlock can't open any doors as the key won't work in any of the door lock's or boot


Try having a new key cut using the key code, at a dealer, not tracing the old key.

Feb 25, 2013 | 2003 Honda Civic

1 Answer

Automatic that won't go into gear.


The automatic transmission on the latest automobiles consist of a variety of components. These include: Planetary gear sets etc
----------------------------------------------------------------------------------
car key programmers

Nov 14, 2012 | 1997 Isuzu Rodeo

1 Answer

Rumbling noise coming from engine compartment.


engine size, etc., I can only make educated guesses, but here goes: You stated "My car will drive, but very slow hardly moving". My first suspicion is that you don't have a transmission problem, but the car is in what Chrysler calls the 'limp-home mode'. This occurs when the computer 'sees' a problem with an engine function or sensor that is serious, but not so bad that the car won't run at all. Limp-home mode allows your car to only operate in second gear so that you won't damage it further by driving normally, but won't leave you stranded either. Is your 'check engine' or 'service engine' light on? If not, check to see that it actually works by turning the key 'on', but not starting the car. All the dash lights should be lit for about 3-5 seconds. No matter what, you need to check your transmission fluid level (on a Crysler, should be checked with the engine running and in gear, NOT park or nuetral). Safety first, make sure someone is holding the brake on - please don't ever trust a 'parking brake' for this. If the fluid level is OK and there's no 'check engine' light you need
to visit a competent transmission shop. Probabably a worn front pump, torque converter, or a hung spool valve in the valve body, none of which is generally fixable at home. If you do have a 'check engine' light on, see a regular mechanic first as there is a mechanical problem probably not related to the transmission. Good Luck!

Oct 13, 2012 | 2003 Chrysler Sebring

1 Answer

Ford diesel excusion A/C won't cool


Any performance testing re auto A/C requires consistant engine revs highway revs eg 1800 exit ramp eg idle stop start 800revs leading to much reduced A/C compressor speed and therefore performance output .Also all testing its desirable to close the bonnet to control design air flow through the engine bay .Also check under dash passenger side air flow pos a filter on return air duct or something sucked up into paper etc .good luck!

Apr 21, 2012 | 2003 Ford Excursion

2 Answers

Where do i start looking for a solution for the following problem o my 2000 dodge grand caravan se?


If you google ( resolder or solder dodge Caravan dash cluster ) you find pictures etc that will make it easier for you. It's actually a pretty common problem around that year. The solder in the cluster where your harness and wiring connector attach (at back) gets cracked and what your describing starts to happen. It's a matter of removing the dash cluster, remove cluster/circuit board from housing, flip it over and just re-heat/re-puddle the spots where the solder is on back of circuit board where that connector attached. If you want more info, feel free to get back to me, but I expect you'll find a good picture if you google it. Good Luck, let me know how it goes.

Nov 17, 2011 | 2000 Dodge Caravan

1 Answer

1999 ford gear handles moves but won't select gear and the car is still in park


Two things happen. On collum shift cars and trucks the bolts work loose out of the shift lever to the cable under the dash where the shift cable connects to the steering collum. the cable connects to a lever that is connected the the shift tube ( part of the steering collum ) bolt heads are 30 torx. the other thing that happens is the cable comes off the trans mission lever and it just snaps on. The bushing waers out and the cable just comes off the pin on the lever coming out of the transmission. Front wheel drive cars it's on the top and rear wheel and trucks it's on the side ( happens less on these and then the cable can break it'self, and the shift cable has to be replaced sometimes if the bushing in the end fails at the transmission end.

Jun 10, 2011 | Ford Taurus Cars & Trucks

1 Answer

Car won't start there is power to the starter. Starter is new. p1684 code the dash lights reset and says done and the the code p1684 comes on. Also you can not tell what gear the car is in there...


Hi,
I just wanted to show you what I found on the internet regarding p1684:
"P1684 engine code

The P1684 code simply means that the battery has been disconneted within the last 50 starts."

May 16, 2011 | 2002 Chrysler Voyager

1 Answer

I have a mercedes c200 komprosser. wat is the use of s and w switch next to the gear shifter. And wat is the use of emc switch on the dash board. thanks. hope you will respond soon.


It has to do with the transmission. The 'S' stands for standard and 'W' winter.

In 'S' mode, the transmission starts out in 1st gear normally, but when you select

In 'W' mode, the transmission will start out in 2nd gear, to help reduce wheel spin/slip on slippery surfaces.

EMC (Emirates Motor Company) means that it was destined for the middle east suchas Saudi or Kuwait etc.... Check out the link below for more info.

http://www.ameinfo.com/175003.html

May 03, 2011 | Mercedes-Benz C230 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

958 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...