Question about Ford Taurus

1 Answer

Remove headlinerfrom 2008 ford focus - Taurus Ford Cars & Trucks

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has achieved Level 3.

  • Master
  • 645 Answers

Pop open the hood and use an open-end wrench to disconnect the negative terminal on the battery. Allow the vehicle to sit for 20 minutes before you start to take out the seats. Unbolt the seat from the chassis of the car, using a 3/8-inch etc
a good diagnostic tools

Posted on Dec 06, 2012


2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: 2008 ford focus

You need 4,6 qts of 5W-20 motor oil. If I were you I'd start right now to use synthetic oil. If you decide to do it - go with "The First in Synthetics" and the best: Amsoil! 5W-20 XL motor oil gives you (guaranteed) protection for 7.500 miles. (Do not fall for warranty cancellations or similar dealership spam. Magnuson-Moss act prohibts cancellations based on brand). Read this: or this: and try to avoid Fram filters. It seems that any other filter is better than Fram. I'd recommend Amsoil, Wix, Carquest (made by Wix), Mobil...

Posted on Nov 14, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2008 Ford Focus a/c cleaned & recharged, why is there no cold air?

Could be gas has leaked out causing low pressure and no cold air!

Dec 28, 2015 | 2008 Ford Focus SE Sedan

1 Answer

Image for valve timing for ford focus 2008 model

Why not buy a cheap shop manual, to give you all the information you need to tackle major repairs.

Aug 25, 2014 | 2008 Ford Focus

1 Answer

What is the location of the horn on a 2008 ford focus

the horn is on the lower passenger side on he chassis sub-frame in between bumper and front quarter panel

May 15, 2014 | 2008 Ford Focus

1 Answer

I'm trying to remove the front door panel on a 2008 ford focus and I've removed all the screws and still won't come loose. Don't want to break the plastic inserts.

There is a tool to help pry the panel off that slips around the plastic pins. And you often times break the pins as they are not designed to be reused.

Feb 17, 2014 | 2008 Ford Focus

1 Answer

Radio/Clock Display light goes out all the time..2008 Ford Focus

well first ck your fuse panel for " inst cluster lghts" fuse bad see your owners manual for its location , second thing it could be is your display "backlight" could be burn't out (happens allot on fords) this is gonna require removal of radio to fix by a trusted and qualified car stereo shop in your area

Oct 30, 2013 | 2008 Ford Focus

1 Answer

How do i take a door window out of 2008 ford focus

first take the door panel off on the inside of the door .... a few screws hold it down then slide the panel up a pinch and pop it off then you will see a few holes there are a few screws that go through plastic and the window just remove these screws while having someone hold the window so it dont slip down into the door... once removed the screws simply pull the window upward and out of the door.

Aug 01, 2013 | 2008 Ford Focus

1 Answer

What tools do I need to change brake pads on ford focus 2008

A few of these poster are making assumption's on what model 2008 Focus the question is directed. Actually on a Ford Focus S with a 2.0 liter the caliper is held on by 2 metric bolts.
I believe the caliper housing is held on by a 15 mm bolt, and you might need a 17mm to hold the caliper pins from spinning.
A 2008 Focus has no removable spring, just a spring plate that the brake pad rides in.
Remember to loosen the bleeder line with a 10mm when you compress the caliper to get rid of the excess fluid or take off the cap to the master cylinder, so the pressure will not damage the master cylinder. Make sure and clean the caliper slides with brake cleaner and lubricate them with a good non-petroleum base grease.

Jun 20, 2012 | 2008 Ford Focus

1 Answer

How do i change the headlight blub on my ford focus Zetec 2008 model

if i remember correctly you have to remove the headlight to replace the bulbs

let me know if this helps mate


Jan 10, 2011 | 2008 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides