Question about 2000 Volkswagen Jetta TDI
Did you have the oil leak prior to changing the oil? The "change engine oil" indicator is just a service reminder to get the oil changed. You need to reset it. Call your local dealer or check your owner's manual for instructions on doing this. -----------------------------------------------------------------------------
a good ECU Chip Tuning Tool
Posted on Dec 06, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: volkswagen jetta 2000 VR6
1.1 mm is the standard gap for a platinum tipped plug. Plugs for this car usually come pre-set but it's always worth checking before installing. Hope this helps.
Posted on Dec 16, 2008
SOURCE: 2000 jetta vr6
if is 2000 or upper the sensor ir la T/B assy it self
becuase they up grade the sistem with a electronic T/B controler so you have to replace T/B assy olso. because is a new assy you need to relearn the adle speed that part will belong to the dealership
Posted on Mar 18, 2009
the only way you will find this out is to have a diagnostic machine plugged in and the fault memory read to check what fault is logged, it could be anything from a ABS wheel speed sensor to a control module fault, to save money in the long run i would advise you get the fault memory read first. hope this helps
Posted on Jul 29, 2009
first try the fues box see if you have a blown fues, next if you put your wipers on can you hear the motor running for them? if you can the linkage has poped off from the motor, its a bit awkward to get it back on and no gaurentee that it will saty on, you might have to replace linkage, or, it might be the cogs on the actual wiper arms have splayed and are now smooth so they dont grip to move, you can take them off by the nut on the arm , get a can (coke can or simular) cut a rectangle out of it the hight and width if the cog, rap it round the cog, (make sure it does not overlap on the ends) and force the arm back into place and then do the nut up, this is just a short quick fix if that is the case you will have to replace the motor, also you can check the relay to the motor in the fues box, give it a tap a couple of times it might work again if not replace it...hope you find these sugestions helpful
Posted on Feb 08, 2010
Tips for a great answer:
Oct 07, 2011 | 2000 Volkswagen Jetta TDI
Mar 22, 2011 | Volkswagen Jetta Cars & Trucks
Oct 02, 2010 | Volkswagen Jetta Cars & Trucks
Feb 27, 2010 | 2000 Volkswagen Jetta TDI
Aug 05, 2009 | 2000 Volkswagen Jetta TDI
Mar 17, 2009 | 2000 Volkswagen Jetta TDI
Aug 08, 2008 | Volkswagen Jetta Cars & Trucks
264 people viewed this question
Usually answered in minutes!